[lkml]   [2003]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: as vs cfq vs deadline
Paolo Ciarrocchi wrote:

> Hi all,
> I've run a 'let's check if it does not skip frames test'.
> kernel is 2.5.62-mm2.
> ** How I performed the test **
> startx
> I've opened to xterminal
> terminal1
> [test@frodo test]$ glxgears
> terminal2
> ./dbench 16
> Following the results:


> I can not see any difference in the results above.
> I guess the test I've run it is not a good test, isn't it ?

a) you're only looking at glxgears average framerate, so you've not measured
whether it drops frames at all, and
b) glxgears does no disk i/o at all, so it shouldn't care a bit what the I/O
scheduelr is doing (other than how much cpu the kernel is using, which
shouldn't be all that high)

> Comments/suggesiontions ?
> Ciao,
> Paolo

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:33    [W:0.038 / U:2.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site