lkml.org 
[lkml]   [2003]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] Spelling fixes for 2.5.63 - don't
This fixes:
dont -> don't (157 occurrences)

diff -ur a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
--- a/arch/alpha/kernel/entry.S Mon Feb 24 11:05:04 2003
+++ b/arch/alpha/kernel/entry.S Tue Feb 25 10:39:37 2003
@@ -516,7 +516,7 @@
stt $f29, 296($sp)
stt $f30, 304($sp)
stt $f0, 312($sp) # save fpcr in slot of $f31
- ldt $f0, 64($sp) # dont let "do_switch_stack" change fp state.
+ ldt $f0, 64($sp) # don't let "do_switch_stack" change fp state.
ret $31, ($1), 1
.end do_switch_stack

diff -ur a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S
--- a/arch/alpha/kernel/head.S Mon Feb 24 11:05:04 2003
+++ b/arch/alpha/kernel/head.S Tue Feb 25 10:39:41 2003
@@ -85,7 +85,7 @@

#
# It is handy, on occasion, to make halt actually just loop.
- # Putting it here means we dont have to recompile the whole
+ # Putting it here means we don't have to recompile the whole
# kernel.
#

diff -ur a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
--- a/arch/arm/kernel/head.S Mon Feb 24 11:05:05 2003
+++ b/arch/arm/kernel/head.S Tue Feb 25 10:39:45 2003
@@ -56,7 +56,7 @@
* ---------------------------
*
* This is normally called from the decompressor code. The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * are: MMU = off, D-cache = off, I-cache = don't care, r0 = 0,
* r1 = machine nr.
*
* This code is mostly position independent, so if you link the kernel at
diff -ur a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S
--- a/arch/arm/mm/tlb-v3.S Mon Feb 24 11:05:05 2003
+++ b/arch/arm/mm/tlb-v3.S Tue Feb 25 10:39:48 2003
@@ -32,7 +32,7 @@
vma_vm_mm r2, r2
act_mm r3 @ get current->active_mm
teq r2, r3 @ == mm ?
- movne pc, lr @ no, we dont do anything
+ movne pc, lr @ no, we don't do anything
ENTRY(v3_flush_kern_tlb_range)
bic r0, r0, #0x0ff
bic r0, r0, #0xf00
diff -ur a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
--- a/arch/arm/mm/tlb-v4.S Mon Feb 24 11:05:15 2003
+++ b/arch/arm/mm/tlb-v4.S Tue Feb 25 10:39:50 2003
@@ -33,7 +33,7 @@
vma_vm_mm ip, r2
act_mm r3 @ get current->active_mm
eors r3, ip, r3 @ == mm ?
- movne pc, lr @ no, we dont do anything
+ movne pc, lr @ no, we don't do anything
vma_vm_flags ip, r2
.v4_flush_kern_tlb_range:
bic r0, r0, #0x0ff
diff -ur a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S
--- a/arch/arm/mm/tlb-v4wb.S Mon Feb 24 11:05:15 2003
+++ b/arch/arm/mm/tlb-v4wb.S Tue Feb 25 10:39:54 2003
@@ -33,7 +33,7 @@
vma_vm_mm ip, r2
act_mm r3 @ get current->active_mm
eors r3, ip, r3 @ == mm ?
- movne pc, lr @ no, we dont do anything
+ movne pc, lr @ no, we don't do anything
vma_vm_flags r2, r2
mcr p15, 0, r3, c7, c10, 4 @ drain WB
tst r2, #VM_EXEC
diff -ur a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S
--- a/arch/arm/mm/tlb-v4wbi.S Mon Feb 24 11:05:12 2003
+++ b/arch/arm/mm/tlb-v4wbi.S Tue Feb 25 10:39:52 2003
@@ -32,7 +32,7 @@
vma_vm_mm ip, r2
act_mm r3 @ get current->active_mm
eors r3, ip, r3 @ == mm ?
- movne pc, lr @ no, we dont do anything
+ movne pc, lr @ no, we don't do anything
mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB
vma_vm_flags r2, r2
diff -ur a/arch/cris/boot/rescue/head.S b/arch/cris/boot/rescue/head.S
--- a/arch/cris/boot/rescue/head.S Mon Feb 24 11:05:39 2003
+++ b/arch/cris/boot/rescue/head.S Tue Feb 25 10:39:58 2003
@@ -10,7 +10,7 @@
* If any of the checksums fail, we assume the flash is so
* corrupt that we cant use it to boot into the ftp flash
* loader, and instead we initialize the serial port to
- * receive a flash-loader and new flash image. we dont include
+ * receive a flash-loader and new flash image. we don't include
* any flash code here, but just accept a certain amount of
* bytes from the serial port and jump into it. the downloaded
* code is put in the cache.
@@ -120,7 +120,7 @@
;; This is the entry point of the rescue code
;; 0x80000000 if loaded in flash (as it should be)
;; since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+ ;; put a nop (2 bytes) here first so we don't accidentally skip the di

nop
di
diff -ur a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
--- a/arch/cris/boot/rescue/kimagerescue.S Mon Feb 24 11:05:44 2003
+++ b/arch/cris/boot/rescue/kimagerescue.S Tue Feb 25 10:40:01 2003
@@ -48,7 +48,7 @@
;; This is the entry point of the rescue code
;; 0x80000000 if loaded in flash (as it should be)
;; since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+ ;; put a nop (2 bytes) here first so we don't accidentally skip the di

nop
di
diff -ur a/arch/cris/drivers/lpslave/e100lpslave.S b/arch/cris/drivers/lpslave/e100lpslave.S
--- a/arch/cris/drivers/lpslave/e100lpslave.S Mon Feb 24 11:05:15 2003
+++ b/arch/cris/drivers/lpslave/e100lpslave.S Tue Feb 25 10:40:04 2003
@@ -384,7 +384,7 @@
.word 0x0001 ; sw_len, 1 byte (ecp command)
.word 0x0019 ; ctrl, d_ecp | d_eol | d_int
.dword 0 ; next
- .dword TP2desc2 ; buffer, dont care
+ .dword TP2desc2 ; buffer, don't care
.word 0 ; hw_len
.word 0 ; status

diff -ur a/arch/cris/kernel/entry.S b/arch/cris/kernel/entry.S
--- a/arch/cris/kernel/entry.S Mon Feb 24 11:05:29 2003
+++ b/arch/cris/kernel/entry.S Tue Feb 25 10:40:11 2003
@@ -259,7 +259,7 @@

;; The system_call is called by a BREAK instruction, which works like
;; an interrupt call but it stores the return PC in BRP instead of IRP.
- ;; Since we dont really want to have two epilogues (one for system calls
+ ;; Since we don't really want to have two epilogues (one for system calls
;; and one for interrupts) we push the contents of BRP instead of IRP in the
;; system call prologue, to make it look like an ordinary interrupt on the
;; stackframe.
@@ -575,7 +575,7 @@
Watchdog_bite:

#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
- ;; We just restart the watchdog here to be sure we dont get
+ ;; We just restart the watchdog here to be sure we don't get
;; hit while printing the watchdogmsg below
;; This restart is compatible with the rest of the C-code, so
;; the C-code can keep restarting the watchdog after this point.
diff -ur a/arch/cris/kernel/head.S b/arch/cris/kernel/head.S
--- a/arch/cris/kernel/head.S Mon Feb 24 11:05:44 2003
+++ b/arch/cris/kernel/head.S Tue Feb 25 10:40:14 2003
@@ -182,7 +182,7 @@
;; This is the entry point of the kernel. We are in supervisor mode.
;; 0x00000000 if Flash, 0x40004000 if DRAM
;; since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+ ;; put a nop (2 bytes) here first so we don't accidentally skip the di
;;
;; NOTICE! The registers r8 and r9 are used as parameters carrying
;; information from the decompressor (if the kernel was compressed).
@@ -196,7 +196,7 @@
;; we cannot do very much! See arch/cris/README.mm
;;
;; Notice that since we're potentially running at 0x00 or 0x40 right now,
- ;; we will get a fault as soon as we enable the MMU if we dont
+ ;; we will get a fault as soon as we enable the MMU if we don't
;; temporarily map those segments linearily.
;;
;; Due to a bug in Etrax-100 LX version 1 we need to map the memory
diff -ur a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
--- a/arch/cris/kernel/process.c Mon Feb 24 11:05:35 2003
+++ b/arch/cris/kernel/process.c Tue Feb 25 10:40:18 2003
@@ -154,7 +154,7 @@
#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
cause_of_death = 0xbedead;
#else
- /* Since we dont plan to keep on reseting the watchdog,
+ /* Since we don't plan to keep on reseting the watchdog,
the key can be arbitrary hence three */
*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
IO_STATE(R_WATCHDOG, enable, start);
@@ -226,7 +226,7 @@

swstack = ((struct switch_stack *)childregs) - 1;

- swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */
+ swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == don't restart the syscall */

/* we want to return into ret_from_sys_call after the _resume */

diff -ur a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
--- a/arch/cris/kernel/setup.c Mon Feb 24 11:05:43 2003
+++ b/arch/cris/kernel/setup.c Tue Feb 25 10:40:20 2003
@@ -164,7 +164,7 @@

paging_init();

- /* We dont use a command line yet, so just re-initialize it without
+ /* We don't use a command line yet, so just re-initialize it without
saving anything that might be there. */

*cmdline_p = command_line;
diff -ur a/arch/cris/kernel/signal.c b/arch/cris/kernel/signal.c
--- a/arch/cris/kernel/signal.c Mon Feb 24 11:05:06 2003
+++ b/arch/cris/kernel/signal.c Tue Feb 25 10:40:23 2003
@@ -494,7 +494,7 @@
case -ERESTARTNOHAND:
/* ERESTARTNOHAND means that the syscall should only be
restarted if there was no handler for the signal, and since
- we only get here if there is a handler, we dont restart */
+ we only get here if there is a handler, we don't restart */
regs->r10 = -EINTR;
break;

diff -ur a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
--- a/arch/cris/mm/fault.c Mon Feb 24 11:05:43 2003
+++ b/arch/cris/mm/fault.c Tue Feb 25 10:40:25 2003
@@ -170,7 +170,7 @@

if (miss) {
/* see if the pte exists at all
- * refer through current_pgd, dont use mm->pgd
+ * refer through current_pgd, don't use mm->pgd
*/

pmd = (pmd_t *)(current_pgd + pgd_index(address));
diff -ur a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c
--- a/arch/cris/mm/tlb.c Mon Feb 24 11:05:09 2003
+++ b/arch/cris/mm/tlb.c Tue Feb 25 10:40:27 2003
@@ -58,7 +58,7 @@
int i;
unsigned long flags;

- /* the vpn of i & 0xf is so we dont write similar TLB entries
+ /* the vpn of i & 0xf is so we don't write similar TLB entries
* in the same 4-way entry group. details..
*/

diff -ur a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
--- a/arch/i386/boot/setup.S Mon Feb 24 11:05:33 2003
+++ b/arch/i386/boot/setup.S Tue Feb 25 10:40:31 2003
@@ -33,7 +33,7 @@
* Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
* <stiker@northlink.com>
*
- * Fix to work around buggy BIOSes which dont use carry bit correctly
+ * Fix to work around buggy BIOSes which don't use carry bit correctly
* and/or report extended memory in CX/DX for e801h memory size detection
* call. As a result the kernel got wrong figures. The int15/e801h docs
* from Ralf Brown interrupt list seem to indicate AX/BX should be used
@@ -360,7 +360,7 @@

meme801:
stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which dont clear/set
+ xorw %cx,%cx # BIOSes which don't clear/set
xorw %dx,%dx # carry on pass/error of
# e801h memory size call
# or merely pass cx,dx though
diff -ur a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
--- a/arch/i386/kernel/apm.c Mon Feb 24 11:05:06 2003
+++ b/arch/i386/kernel/apm.c Tue Feb 25 10:40:41 2003
@@ -1096,7 +1096,7 @@
* @blank: on/off
*
* Attempt to blank the console, firstly by blanking just video device
- * zero, and if that fails (some BIOSes dont support it) then it blanks
+ * zero, and if that fails (some BIOSes don't support it) then it blanks
* all video devices. Typically the BIOS will do laptop backlight and
* monitor powerdown for us.
*/
diff -ur a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
--- a/arch/i386/kernel/cpu/cyrix.c Mon Feb 24 11:05:11 2003
+++ b/arch/i386/kernel/cpu/cyrix.c Tue Feb 25 10:40:54 2003
@@ -77,7 +77,7 @@
* BIOSes for compatibility with DOS games. This makes the udelay loop
* work correctly, and improves performance.
*
- * FIXME: our newer udelay uses the tsc. We dont need to frob with SLOP
+ * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
*/

extern void calibrate_delay(void) __init;
diff -ur a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
--- a/arch/i386/kernel/io_apic.c Mon Feb 24 11:05:15 2003
+++ b/arch/i386/kernel/io_apic.c Tue Feb 25 10:41:05 2003
@@ -46,7 +46,7 @@

/*
* Is the SiS APIC rmw bug present ?
- * -1 = dont know, 0 = no, 1 = yes
+ * -1 = don't know, 0 = no, 1 = yes
*/
int sis_apic_bug = -1;

diff -ur a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
--- a/arch/i386/kernel/nmi.c Mon Feb 24 11:05:33 2003
+++ b/arch/i386/kernel/nmi.c Tue Feb 25 10:41:08 2003
@@ -325,7 +325,7 @@
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
*
- * since NMIs dont listen to _any_ locks, we have to be extremely
+ * since NMIs don't listen to _any_ locks, we have to be extremely
* careful not to rely on unsafe variables. The printk might lock
* up though, so we have to break up any console locks first ...
* [when there will be more tty-related locks, break them up
diff -ur a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
--- a/arch/i386/kernel/setup.c Mon Feb 24 11:05:31 2003
+++ b/arch/i386/kernel/setup.c Tue Feb 25 10:41:15 2003
@@ -818,7 +818,7 @@
request_resource(&iomem_resource, res);
if (e820.map[i].type == E820_RAM) {
/*
- * We dont't know which RAM region contains kernel data,
+ * We don't know which RAM region contains kernel data,
* so we try it repeatedly and let the resource manager
* test it.
*/
diff -ur a/arch/i386/lib/mmx.c b/arch/i386/lib/mmx.c
--- a/arch/i386/lib/mmx.c Mon Feb 24 11:05:32 2003
+++ b/arch/i386/lib/mmx.c Tue Feb 25 10:41:19 2003
@@ -15,7 +15,7 @@
* (reported so on K6-III)
* We should use a better code neutral filler for the short jump
* leal ebx. [ebx] is apparently best for K6-2, but Cyrix ??
- * We also want to clobber the filler register so we dont get any
+ * We also want to clobber the filler register so we don't get any
* register forwarding stalls on the filler.
*
* Add *user handling. Checksums are not a win with MMX on any CPU
diff -ur a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
--- a/arch/ia64/ia32/ia32_signal.c Mon Feb 24 11:05:05 2003
+++ b/arch/ia64/ia32/ia32_signal.c Tue Feb 25 10:41:21 2003
@@ -338,7 +338,7 @@
/*
* Updating fsr, fcr, fir, fdr.
* Just a bit more complicated than save.
- * - Need to make sure that we dont write any value other than the
+ * - Need to make sure that we don't write any value other than the
* specific fpstate info
* - Need to make sure that the untouched part of frs, fdr, fir, fcr
* should remain same while writing.
diff -ur a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
--- a/arch/ia64/kernel/minstate.h Mon Feb 24 11:05:41 2003
+++ b/arch/ia64/kernel/minstate.h Tue Feb 25 10:41:31 2003
@@ -26,7 +26,7 @@
*/

/*
- * For ivt.s we want to access the stack virtually so we dont have to disable translation
+ * For ivt.s we want to access the stack virtually so we don't have to disable translation
* on interrupts.
*/
#define MINSTATE_START_SAVE_MIN_VIRT \
@@ -52,7 +52,7 @@

/*
* For mca_asm.S we want to access the stack physically since the state is saved before we
- * go virtual and dont want to destroy the iip or ipsr.
+ * go virtual and don't want to destroy the iip or ipsr.
*/
#define MINSTATE_START_SAVE_MIN_PHYS \
(pKStk) movl sp=ia64_init_stack+IA64_STK_OFFSET-IA64_PT_REGS_SIZE; \
diff -ur a/arch/ia64/sn/fakeprom/fpmem.c b/arch/ia64/sn/fakeprom/fpmem.c
--- a/arch/ia64/sn/fakeprom/fpmem.c Mon Feb 24 11:05:16 2003
+++ b/arch/ia64/sn/fakeprom/fpmem.c Tue Feb 25 10:41:34 2003
@@ -226,7 +226,7 @@
numbytes -= NODE0_HOLE_SIZE;
/*
* UGLY hack - we must skip overr the kernel and
- * PROM runtime services but we dont exactly where it is.
+ * PROM runtime services but we don't exactly where it is.
* So lets just reserve:
* node 0
* 0-1MB for PAL
diff -ur a/arch/ia64/sn/fakeprom/fw-emu.c b/arch/ia64/sn/fakeprom/fw-emu.c
--- a/arch/ia64/sn/fakeprom/fw-emu.c Mon Feb 24 11:05:39 2003
+++ b/arch/ia64/sn/fakeprom/fw-emu.c Tue Feb 25 10:41:38 2003
@@ -757,7 +757,7 @@
sal_systab->checksum = -checksum;

/* If the checksum is correct, the kernel tries to use the
- * table. We dont build enough table & the kernel aborts.
+ * table. We don't build enough table & the kernel aborts.
* Note that the PROM hasd thhhe same problem!!
*/

diff -ur a/arch/ia64/sn/io/sn2/pcibr/pcibr_dvr.c b/arch/ia64/sn/io/sn2/pcibr/pcibr_dvr.c
--- a/arch/ia64/sn/io/sn2/pcibr/pcibr_dvr.c Mon Feb 24 11:06:03 2003
+++ b/arch/ia64/sn/io/sn2/pcibr/pcibr_dvr.c Tue Feb 25 10:41:41 2003
@@ -1527,7 +1527,7 @@
/* enable parity checking on PICs internal RAM */
pic_ctrl_reg |= PIC_CTRL_PAR_EN_RESP;
pic_ctrl_reg |= PIC_CTRL_PAR_EN_ATE;
- /* PIC BRINGUP WAR (PV# 862253): dont enable write request
+ /* PIC BRINGUP WAR (PV# 862253): don't enable write request
* parity checking.
*/
if (!PCIBR_WAR_ENABLED(PV862253, pcibr_soft)) {
diff -ur a/arch/ia64/sn/io/sn2/pcibr/pcibr_slot.c b/arch/ia64/sn/io/sn2/pcibr/pcibr_slot.c
--- a/arch/ia64/sn/io/sn2/pcibr/pcibr_slot.c Mon Feb 24 11:05:31 2003
+++ b/arch/ia64/sn/io/sn2/pcibr/pcibr_slot.c Tue Feb 25 10:41:44 2003
@@ -803,7 +803,7 @@
* 'min_gnt' and attempt to calculate a latency time.
*
* NOTE: For now if the device is on the 'real time' arbitration
- * ring we dont set the latency timer.
+ * ring we don't set the latency timer.
*
* WAR: SGI's IOC3 and RAD devices target abort if you write a
* single byte into their config space. So don't set the Latency
diff -ur a/arch/ia64/sn/kernel/llsc4.c b/arch/ia64/sn/kernel/llsc4.c
--- a/arch/ia64/sn/kernel/llsc4.c Mon Feb 24 11:05:39 2003
+++ b/arch/ia64/sn/kernel/llsc4.c Tue Feb 25 10:41:47 2003
@@ -301,7 +301,7 @@
*/
linei = randn(linecount, &seed);
sharei = randn(2, &seed);
- slinei = (linei + (linecount/2))%linecount; /* I dont like this - fix later */
+ slinei = (linei + (linecount/2))%linecount; /* I don't like this - fix later */

linep = (dataline_t *)blocks[linei];
slinep = (dataline_t *)blocks[slinei];
diff -ur a/arch/ia64/sn/kernel/sn1/sn1_smp.c b/arch/ia64/sn/kernel/sn1/sn1_smp.c
--- a/arch/ia64/sn/kernel/sn1/sn1_smp.c Mon Feb 24 11:05:16 2003
+++ b/arch/ia64/sn/kernel/sn1/sn1_smp.c Tue Feb 25 10:41:50 2003
@@ -100,7 +100,7 @@

/*
* The following table/struct is for remembering PTC coherency domains. It
- * is also used to translate sapicid into cpuids. We dont want to start
+ * is also used to translate sapicid into cpuids. We don't want to start
* cpus unless we know their cache domain.
*/
#ifdef PTC_NOTYET
diff -ur a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c Mon Feb 24 11:05:44 2003
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c Tue Feb 25 10:41:52 2003
@@ -395,7 +395,7 @@
mycnode = local_nodeid;

/*
- * For now, we dont want to spin uninterruptibly waiting
+ * For now, we don't want to spin uninterruptibly waiting
* for the lock. Makes hangs hard to debug.
*/
local_irq_save(flags);
diff -ur a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
--- a/arch/mips/kernel/setup.c Mon Feb 24 11:05:11 2003
+++ b/arch/mips/kernel/setup.c Tue Feb 25 10:42:13 2003
@@ -775,7 +775,7 @@
request_resource(&iomem_resource, res);

/*
- * We dont't know which RAM region contains kernel data,
+ * We don't know which RAM region contains kernel data,
* so we try it repeatedly and let the resource manager
* test it.
*/
diff -ur a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
--- a/arch/mips/math-emu/ieee754dp.c Mon Feb 24 11:05:37 2003
+++ b/arch/mips/math-emu/ieee754dp.c Tue Feb 25 10:42:18 2003
@@ -106,7 +106,7 @@
*/
ieee754dp ieee754dp_format(int sn, int xe, unsigned long long xm)
{
- assert(xm); /* we dont gen exact zeros (probably should) */
+ assert(xm); /* we don't gen exact zeros (probably should) */

assert((xm >> (DP_MBITS + 1 + 3)) == 0); /* no execess */
assert(xm & (DP_HIDDEN_BIT << 3));
diff -ur a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
--- a/arch/mips/math-emu/ieee754sp.c Mon Feb 24 11:05:15 2003
+++ b/arch/mips/math-emu/ieee754sp.c Tue Feb 25 10:42:20 2003
@@ -107,7 +107,7 @@
*/
ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
{
- assert(xm); /* we dont gen exact zeros (probably should) */
+ assert(xm); /* we don't gen exact zeros (probably should) */

assert((xm >> (SP_MBITS + 1 + 3)) == 0); /* no execess */
assert(xm & (SP_HIDDEN_BIT << 3));
diff -ur a/arch/mips64/math-emu/ieee754dp.c b/arch/mips64/math-emu/ieee754dp.c
--- a/arch/mips64/math-emu/ieee754dp.c Mon Feb 24 11:05:41 2003
+++ b/arch/mips64/math-emu/ieee754dp.c Tue Feb 25 10:42:00 2003
@@ -106,7 +106,7 @@
*/
ieee754dp ieee754dp_format(int sn, int xe, unsigned long long xm)
{
- assert(xm); /* we dont gen exact zeros (probably should) */
+ assert(xm); /* we don't gen exact zeros (probably should) */

assert((xm >> (DP_MBITS + 1 + 3)) == 0); /* no execess */
assert(xm & (DP_HIDDEN_BIT << 3));
diff -ur a/arch/mips64/math-emu/ieee754sp.c b/arch/mips64/math-emu/ieee754sp.c
--- a/arch/mips64/math-emu/ieee754sp.c Mon Feb 24 11:05:34 2003
+++ b/arch/mips64/math-emu/ieee754sp.c Tue Feb 25 10:42:03 2003
@@ -107,7 +107,7 @@
*/
ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
{
- assert(xm); /* we dont gen exact zeros (probably should) */
+ assert(xm); /* we don't gen exact zeros (probably should) */

assert((xm >> (SP_MBITS + 1 + 3)) == 0); /* no execess */
assert(xm & (SP_HIDDEN_BIT << 3));
diff -ur a/arch/mips64/sgi-ip27/ip27-nmi.c b/arch/mips64/sgi-ip27/ip27-nmi.c
--- a/arch/mips64/sgi-ip27/ip27-nmi.c Mon Feb 24 11:05:05 2003
+++ b/arch/mips64/sgi-ip27/ip27-nmi.c Tue Feb 25 10:42:09 2003
@@ -127,7 +127,7 @@
* This is for 2 reasons:
* - sometimes a MMSC fail to NMI all cpus.
* - on 512p SN0 system, the MMSC will only send NMIs to
- * half the cpus. Unfortunately, we dont know which cpus may be
+ * half the cpus. Unfortunately, we don't know which cpus may be
* NMIed - it depends on how the site chooses to configure.
*
* Note: it has been measure that it takes the MMSC up to 2.3 secs to
diff -ur a/arch/ppc64/kernel/pSeries_lpar.c b/arch/ppc64/kernel/pSeries_lpar.c
--- a/arch/ppc64/kernel/pSeries_lpar.c Mon Feb 24 11:06:02 2003
+++ b/arch/ppc64/kernel/pSeries_lpar.c Tue Feb 25 10:42:30 2003
@@ -461,7 +461,7 @@
return -1;

/*
- * Since we try and ioremap PHBs we dont own, the pte insert
+ * Since we try and ioremap PHBs we don't own, the pte insert
* will fail. However we must catch the failure in hash_page
* or we will loop forever, so return -2 in this case.
*/
@@ -485,7 +485,7 @@

for (i = 0; i < HPTES_PER_GROUP; i++) {

- /* dont remove a bolted entry */
+ /* don't remove a bolted entry */
lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
(0x1UL << 4), &dummy1, &dummy2);

diff -ur a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c
--- a/arch/ppc64/xmon/xmon.c Mon Feb 24 11:05:41 2003
+++ b/arch/ppc64/xmon/xmon.c Tue Feb 25 10:42:32 2003
@@ -2072,7 +2072,7 @@
int instr;
int num_parms;

- /* dont look for traceback table in userspace */
+ /* don't look for traceback table in userspace */
if (codeaddr < PAGE_OFFSET)
return 0;

diff -ur a/arch/s390/boot/ipleckd.S b/arch/s390/boot/ipleckd.S
--- a/arch/s390/boot/ipleckd.S Mon Feb 24 11:05:15 2003
+++ b/arch/s390/boot/ipleckd.S Tue Feb 25 10:42:43 2003
@@ -14,7 +14,7 @@
# change 09/20/00 removed obsolete store of ipldevice to textesegment

# Usage of registers
-# r1: ipl subchannel ( general use, dont overload without save/restore !)
+# r1: ipl subchannel ( general use, don't overload without save/restore !)
# r10:
# r13: base register index to 0x0000
# r14: callers address
diff -ur a/arch/s390x/boot/ipleckd.S b/arch/s390x/boot/ipleckd.S
--- a/arch/s390x/boot/ipleckd.S Mon Feb 24 11:05:14 2003
+++ b/arch/s390x/boot/ipleckd.S Tue Feb 25 10:42:48 2003
@@ -14,7 +14,7 @@
# change 09/20/00 removed obsolete store of ipldevice to textesegment

# Usage of registers
-# r1: ipl subchannel ( general use, dont overload without save/restore !)
+# r1: ipl subchannel ( general use, don't overload without save/restore !)
# r10:
# r13: base register index to 0x0000
# r14: callers address
diff -ur a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
--- a/arch/sparc/mm/srmmu.c Mon Feb 24 11:05:34 2003
+++ b/arch/sparc/mm/srmmu.c Tue Feb 25 10:42:51 2003
@@ -2120,7 +2120,7 @@
srmmu_is_bad();
}

-/* dont laugh, static pagetables */
+/* don't laugh, static pagetables */
static void srmmu_check_pgt_cache(int low, int high)
{
}
diff -ur a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
--- a/arch/x86_64/boot/setup.S Mon Feb 24 11:05:47 2003
+++ b/arch/x86_64/boot/setup.S Tue Feb 25 10:43:00 2003
@@ -33,7 +33,7 @@
* Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
* <stiker@northlink.com>
*
- * Fix to work around buggy BIOSes which dont use carry bit correctly
+ * Fix to work around buggy BIOSes which don't use carry bit correctly
* and/or report extended memory in CX/DX for e801h memory size detection
* call. As a result the kernel got wrong figures. The int15/e801h docs
* from Ralf Brown interrupt list seem to indicate AX/BX should be used
@@ -349,7 +349,7 @@

meme801:
stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which dont clear/set
+ xorw %cx,%cx # BIOSes which don't clear/set
xorw %dx,%dx # carry on pass/error of
# e801h memory size call
# or merely pass cx,dx though
diff -ur a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
--- a/arch/x86_64/kernel/e820.c Mon Feb 24 11:05:14 2003
+++ b/arch/x86_64/kernel/e820.c Tue Feb 25 10:43:06 2003
@@ -204,7 +204,7 @@
request_resource(&iomem_resource, res);
if (e820.map[i].type == E820_RAM) {
/*
- * We dont't know which RAM region contains kernel data,
+ * We don't know which RAM region contains kernel data,
* so we try it repeatedly and let the resource manager
* test it.
*/
diff -ur a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
--- a/arch/x86_64/kernel/nmi.c Mon Feb 24 11:05:31 2003
+++ b/arch/x86_64/kernel/nmi.c Tue Feb 25 10:43:11 2003
@@ -228,7 +228,7 @@
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
*
- * since NMIs dont listen to _any_ locks, we have to be extremely
+ * since NMIs don't listen to _any_ locks, we have to be extremely
* careful not to rely on unsafe variables. The printk might lock
* up though, so we have to break up any console locks first ...
* [when there will be more tty-related locks, break them up
diff -ur a/drivers/char/mwave/tp3780i.h b/drivers/char/mwave/tp3780i.h
--- a/drivers/char/mwave/tp3780i.h Mon Feb 24 11:05:10 2003
+++ b/drivers/char/mwave/tp3780i.h Tue Feb 25 10:43:24 2003
@@ -72,7 +72,7 @@
#define TP_CFG_DisableLBusTimeout 0 /* Enable LBus timeout */
#define TP_CFG_N_Divisor 32 /* Clock = 39.1608 Mhz */
#define TP_CFG_M_Multiplier 37 /* " */
-#define TP_CFG_PllBypass 0 /* dont bypass */
+#define TP_CFG_PllBypass 0 /* don't bypass */
#define TP_CFG_ChipletEnable 0xFFFF /* Enable all chiplets */

typedef struct {
diff -ur a/drivers/char/watchdog/i810-tco.c b/drivers/char/watchdog/i810-tco.c
--- a/drivers/char/watchdog/i810-tco.c Mon Feb 24 11:05:05 2003
+++ b/drivers/char/watchdog/i810-tco.c Tue Feb 25 10:43:45 2003
@@ -161,7 +161,7 @@
}

/*
- * Reload (trigger) the timer. Lock is needed so we dont reload it during
+ * Reload (trigger) the timer. Lock is needed so we don't reload it during
* a reprogramming event
*/

diff -ur a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
--- a/drivers/ide/ide-dma.c Mon Feb 24 11:05:32 2003
+++ b/drivers/ide/ide-dma.c Tue Feb 25 10:43:50 2003
@@ -454,7 +454,7 @@
* An IDE DMA transfer timed out. In the event of an error we ask
* the driver to resolve the problem, if a DMA transfer is still
* in progress we continue to wait (arguably we need to add a
- * secondary 'I dont care what the drive thinks' timeout here)
+ * secondary 'I don't care what the drive thinks' timeout here)
* Finally if we have an interrupt but for some reason got the
* timeout first we complete the I/O. This can occur if an
* interrupt is lost or due to bugs.
diff -ur a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
--- a/drivers/ide/ppc/mpc8xx.c Mon Feb 24 11:05:47 2003
+++ b/drivers/ide/ppc/mpc8xx.c Tue Feb 25 10:43:53 2003
@@ -331,7 +331,7 @@
(0x80000000 >> ioport_dsc[data_port].irq);

#ifdef CONFIG_IDE_8xx_PCCARD
- /* Make sure we dont get garbage irq */
+ /* Make sure we don't get garbage irq */
((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF;

/* Enable falling edge irq */
diff -ur a/drivers/ieee1394/amdtp.c b/drivers/ieee1394/amdtp.c
--- a/drivers/ieee1394/amdtp.c Mon Feb 24 11:05:34 2003
+++ b/drivers/ieee1394/amdtp.c Tue Feb 25 10:43:56 2003
@@ -228,7 +228,7 @@
/* The cycle_count and cycle_offset fields are used for the
* synchronization timestamps (syt) in the cip header. They
* are incremented by at least a cycle every time we put a
- * time stamp in a packet. As we dont time stamp all
+ * time stamp in a packet. As we don't time stamp all
* packages, cycle_count isn't updated in every cycle, and
* sometimes it's incremented by 2. Thus, we have
* cycle_count2, which is simply incremented by one with each
@@ -748,7 +748,7 @@

/* This next addition should be modulo 8000 (0x1f40),
* but we only use the lower 4 bits of cycle_count, so
- * we dont need the modulo. */
+ * we don't need the modulo. */
atomic_add(s->cycle_offset.integer / 3072, &s->cycle_count);
s->cycle_offset.integer %= 3072;
}
diff -ur a/drivers/isdn/eicon/eicon_idi.c b/drivers/isdn/eicon/eicon_idi.c
--- a/drivers/isdn/eicon/eicon_idi.c Mon Feb 24 11:05:04 2003
+++ b/drivers/isdn/eicon/eicon_idi.c Tue Feb 25 10:43:59 2003
@@ -2717,7 +2717,7 @@
int twaitpq = 0;

if (ack->RcId != ((chan->e.ReqCh) ? chan->e.B2Id : chan->e.D3Id)) {
- /* I dont know why this happens, should not ! */
+ /* I don't know why this happens, should not ! */
/* just ignoring this RC */
eicon_log(ccard, 16, "idi_ack: Ch%d: RcId %d not equal to last %d\n", chan->No,
ack->RcId, (chan->e.ReqCh) ? chan->e.B2Id : chan->e.D3Id);
diff -ur a/drivers/isdn/hardware/eicon/i4l_idi.c b/drivers/isdn/hardware/eicon/i4l_idi.c
--- a/drivers/isdn/hardware/eicon/i4l_idi.c Mon Feb 24 11:05:32 2003
+++ b/drivers/isdn/hardware/eicon/i4l_idi.c Tue Feb 25 10:44:01 2003
@@ -2717,7 +2717,7 @@
int twaitpq = 0;

if (ack->RcId != ((chan->e.ReqCh) ? chan->e.B2Id : chan->e.D3Id)) {
- /* I dont know why this happens, should not ! */
+ /* I don't know why this happens, should not ! */
/* just ignoring this RC */
eicon_log(ccard, 16, "idi_ack: Ch%d: RcId %d not equal to last %d\n", chan->No,
ack->RcId, (chan->e.ReqCh) ? chan->e.B2Id : chan->e.D3Id);
diff -ur a/drivers/isdn/hysdn/hysdn_boot.c b/drivers/isdn/hysdn/hysdn_boot.c
--- a/drivers/isdn/hysdn/hysdn_boot.c Mon Feb 24 11:05:29 2003
+++ b/drivers/isdn/hysdn/hysdn_boot.c Tue Feb 25 10:44:03 2003
@@ -357,7 +357,7 @@
hysdn_addlog(card, "SysReady Token Data invalid CRC");
return (1);
}
- len--; /* dont check CRC byte */
+ len--; /* don't check CRC byte */
while (len > 0) {

if (*cp == SYSR_TOK_END)
diff -ur a/drivers/md/md.c b/drivers/md/md.c
--- a/drivers/md/md.c Mon Feb 24 11:05:14 2003
+++ b/drivers/md/md.c Tue Feb 25 10:44:05 2003
@@ -1427,7 +1427,7 @@
/*
* 'default chunksize' in the old md code used to
* be PAGE_SIZE, baaad.
- * we abort here to be on the safe side. We dont
+ * we abort here to be on the safe side. We don't
* want to continue the bad practice.
*/
printk(BAD_CHUNKSIZE);
diff -ur a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c
--- a/drivers/media/radio/miropcm20-rds-core.c Mon Feb 24 11:05:43 2003
+++ b/drivers/media/radio/miropcm20-rds-core.c Tue Feb 25 10:44:08 2003
@@ -91,7 +91,7 @@
}
}

-/* dont use any ..._nowait() function if you are not sure what you do... */
+/* don't use any ..._nowait() function if you are not sure what you do... */

static inline void rds_rawwrite_nowait(unsigned char byte)
{
diff -ur a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
--- a/drivers/message/fusion/mptscsih.c Mon Feb 24 11:05:16 2003
+++ b/drivers/message/fusion/mptscsih.c Tue Feb 25 10:44:12 2003
@@ -4207,7 +4207,7 @@
/*
* Need to check ASC here; if it is "special," then
* the ASCQ is variable, and indicates failed component number.
- * We must treat the ASCQ as a "dont care" while searching the
+ * We must treat the ASCQ as a "don't care" while searching the
* mptscsih_ASCQ_Table[] by masking it off, and then restoring it later
* on when we actually need to identify the failed component.
*/
diff -ur a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
--- a/drivers/message/i2o/i2o_block.c Mon Feb 24 11:05:38 2003
+++ b/drivers/message/i2o/i2o_block.c Tue Feb 25 10:44:14 2003
@@ -1729,7 +1729,7 @@
* We may get further callbacks for ourself. The i2o_core
* code handles this case reasonably sanely. The problem here
* is we shouldn't get them .. but a couple of cards feel
- * obliged to tell us stuff we dont care about.
+ * obliged to tell us stuff we don't care about.
*
* This isnt ideal at all but will do for now.
*/
diff -ur a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c
--- a/drivers/mtd/devices/blkmtd.c Mon Feb 24 11:05:05 2003
+++ b/drivers/mtd/devices/blkmtd.c Tue Feb 25 10:44:19 2003
@@ -16,7 +16,7 @@
* thread writes pages out to the device in the background. This
* ensures that writes are order even if a page is updated twice.
* Also, since pages in the page cache are never marked as dirty,
- * we dont have to worry about writepage() being called on some
+ * we don't have to worry about writepage() being called on some
* random page which may not be in the write order.
*
* Erases are handled like writes, so the callback is called after
@@ -33,7 +33,7 @@
* Page cache usage may still be a bit wrong. Check we are doing
* everything properly.
*
- * Somehow allow writes to dirty the page cache so we dont use too
+ * Somehow allow writes to dirty the page cache so we don't use too
* much memory making copies of outgoing pages. Need to handle case
* where page x is written to, then page y, then page x again before
* any of them have been committed to disk.
@@ -350,7 +350,7 @@
int max_sectors = KIO_MAX_SECTORS >> (item->rawdevice->sector_bits - 9);

/* If we are writing to the last page on the device and it doesn't end
- * on a page boundary, subtract the number of sectors that dont exist.
+ * on a page boundary, subtract the number of sectors that don't exist.
*/
if(item->rawdevice->partial_last_page &&
(item->pagenr + item->pagecnt -1) == item->rawdevice->partial_last_page) {
diff -ur a/drivers/net/8390.c b/drivers/net/8390.c
--- a/drivers/net/8390.c Mon Feb 24 11:05:08 2003
+++ b/drivers/net/8390.c Tue Feb 25 10:44:22 2003
@@ -277,7 +277,7 @@
/* Mask interrupts from the ethercard.
SMP: We have to grab the lock here otherwise the IRQ handler
on another CPU can flip window and race the IRQ mask set. We end
- up trashing the mcast filter not disabling irqs if we dont lock */
+ up trashing the mcast filter not disabling irqs if we don't lock */

spin_lock_irqsave(&ei_local->page_lock, flags);
outb_p(0x00, e8390_base + EN0_IMR);
diff -ur a/drivers/net/e100/e100_main.c b/drivers/net/e100/e100_main.c
--- a/drivers/net/e100/e100_main.c Mon Feb 24 11:05:31 2003
+++ b/drivers/net/e100/e100_main.c Tue Feb 25 10:44:25 2003
@@ -2236,7 +2236,7 @@
spin_lock_irqsave(&(bdp->bd_lock), lock_flag);
switch (bdp->next_cu_cmd) {
case RESUME_NO_WAIT:
- /*last cu command was a CU_RESMUE if this is a 558 or newer we dont need to
+ /*last cu command was a CU_RESMUE if this is a 558 or newer we don't need to
* wait for command word to clear, we reach here only if we are bachlor
*/
e100_exec_cmd(bdp, SCB_CUC_RESUME);
diff -ur a/drivers/net/fc/iph5526.c b/drivers/net/fc/iph5526.c
--- a/drivers/net/fc/iph5526.c Mon Feb 24 11:05:12 2003
+++ b/drivers/net/fc/iph5526.c Tue Feb 25 10:44:47 2003
@@ -748,7 +748,7 @@
else
if (current_IMQ_index < fi->q.imq_cons_indx)
no_of_entries = IMQ_LENGTH - (fi->q.imq_cons_indx - current_IMQ_index);
- /* We dont want to look at the same IMQ entry again.
+ /* We don't want to look at the same IMQ entry again.
*/
temp_imq_cons_indx = fi->q.imq_cons_indx + 1;
if (no_of_entries != 0)
@@ -2263,7 +2263,7 @@
u_int type = TYPE_ELS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
u_int my_mtu = fi->g.my_mtu;
ENTER("tx_logi");
- /* We dont want interrupted for our own logi.
+ /* We don't want interrupted for our own logi.
* It screws up the port discovery process.
*/
if (d_id == fi->g.my_id)
@@ -2567,7 +2567,7 @@
}
/* Perform Port Discovery after timer expires.
* We are giving time for the ADISCed nodes to respond
- * so that we dont have to perform PLOGI to those whose
+ * so that we don't have to perform PLOGI to those whose
* login are _still_ valid.
*/
fi->explore_timer.function = port_discovery_timer;
@@ -3527,7 +3527,7 @@
/* There might be some new nodes to be
* discovered. But, some of the earlier
* requests as a result of the RSCN might be
- * in progress. We dont want to duplicate that
+ * in progress. We don't want to duplicate that
* effort. So letz call SCR after a lag.
*/
fi->explore_timer.function = scr_timer;
diff -ur a/drivers/net/fc/tach_structs.h b/drivers/net/fc/tach_structs.h
--- a/drivers/net/fc/tach_structs.h Mon Feb 24 11:05:38 2003
+++ b/drivers/net/fc/tach_structs.h Tue Feb 25 10:44:51 2003
@@ -248,7 +248,7 @@
volatile u_char n_port_try;
volatile u_char nport_timer_set;
volatile u_char lport_timer_set;
- /* Hmmm... We dont want to Initialize while closing */
+ /* Hmmm... We don't want to Initialize while closing */
u_char dont_init;
u_int my_node_name_high;
u_int my_node_name_low;
diff -ur a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
--- a/drivers/net/irda/irtty-sir.c Mon Feb 24 11:05:04 2003
+++ b/drivers/net/irda/irtty-sir.c Tue Feb 25 10:44:57 2003
@@ -532,7 +532,7 @@
tty->driver.flush_buffer(tty);

/* from old irtty - but what is it good for?
- * we _are_ the ldisc and we _dont_ implement flush_buffer!
+ * we _are_ the ldisc and we _don't_ implement flush_buffer!
*
* if (tty->ldisc.flush_buffer)
* tty->ldisc.flush_buffer(tty);
diff -ur a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
--- a/drivers/net/irda/sir_dev.c Mon Feb 24 11:05:35 2003
+++ b/drivers/net/irda/sir_dev.c Tue Feb 25 10:45:00 2003
@@ -569,7 +569,7 @@

/* instead of adding tests to protect against drv->do_write==NULL
* at several places we refuse to create a sir_dev instance for
- * drivers which dont implement do_write.
+ * drivers which don't implement do_write.
*/
if (!drv || !drv->do_write)
return NULL;
diff -ur a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
--- a/drivers/net/pcmcia/axnet_cs.c Mon Feb 24 11:05:33 2003
+++ b/drivers/net/pcmcia/axnet_cs.c Tue Feb 25 10:45:03 2003
@@ -1226,7 +1226,7 @@
/* Mask interrupts from the ethercard.
SMP: We have to grab the lock here otherwise the IRQ handler
on another CPU can flip window and race the IRQ mask set. We end
- up trashing the mcast filter not disabling irqs if we dont lock */
+ up trashing the mcast filter not disabling irqs if we don't lock */

spin_lock_irqsave(&ei_local->page_lock, flags);
outb_p(0x00, e8390_base + EN0_IMR);
diff -ur a/drivers/net/sis900.c b/drivers/net/sis900.c
--- a/drivers/net/sis900.c Mon Feb 24 11:05:29 2003
+++ b/drivers/net/sis900.c Tue Feb 25 10:45:05 2003
@@ -1971,7 +1971,7 @@
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);

/* enable auto negotiation and reset the negotioation
- (I dont really know what the auto negatiotiation reset
+ (I don't really know what the auto negatiotiation reset
really means, but it sounds for me right to do one here)*/
mdio_write(dev, mii_phy->phy_addr,
MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
diff -ur a/drivers/net/tg3.c b/drivers/net/tg3.c
--- a/drivers/net/tg3.c Mon Feb 24 11:05:33 2003
+++ b/drivers/net/tg3.c Tue Feb 25 10:45:10 2003
@@ -3303,7 +3303,7 @@
0x00000000
};

-#if 0 /* All zeros, dont eat up space with it. */
+#if 0 /* All zeros, don't eat up space with it. */
u32 tg3FwData[(TG3_FW_DATA_LEN / sizeof(u32)) + 1] = {
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000
@@ -3736,7 +3736,7 @@
0x00000000
};

-#if 0 /* All zeros, dont eat up space with it. */
+#if 0 /* All zeros, don't eat up space with it. */
u32 tg3TsoFwData[] = {
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000
diff -ur a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
--- a/drivers/net/tokenring/madgemc.c Mon Feb 24 11:05:45 2003
+++ b/drivers/net/tokenring/madgemc.c Tue Feb 25 10:45:12 2003
@@ -80,7 +80,7 @@
static void madgemc_interrupt(int irq, void *dev_id, struct pt_regs *regs);

/*
- * These work around paging, however they dont guarentee you're on the
+ * These work around paging, however they don't guarentee you're on the
* right page.
*/
#define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
diff -ur a/drivers/net/wan/comx-hw-munich.c b/drivers/net/wan/comx-hw-munich.c
--- a/drivers/net/wan/comx-hw-munich.c Mon Feb 24 11:05:12 2003
+++ b/drivers/net/wan/comx-hw-munich.c Tue Feb 25 10:45:14 2003
@@ -1304,7 +1304,7 @@
ch = (struct comx_channel *)dev->priv;
hw = (struct slicecom_privdata *)ch->HW_privdata;

- /* We dont trust the "Tx available" info from the TIQ, but check */
+ /* We don't trust the "Tx available" info from the TIQ, but check */
/* every ring if there is some free room */

if (ch->init_status && netif_running(dev))
diff -ur a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
--- a/drivers/net/wan/hostess_sv11.c Mon Feb 24 11:05:38 2003
+++ b/drivers/net/wan/hostess_sv11.c Tue Feb 25 10:45:21 2003
@@ -61,7 +61,7 @@
skb->mac.raw=skb->data;
skb->dev=c->netdevice;
/*
- * Send it to the PPP layer. We dont have time to process
+ * Send it to the PPP layer. We don't have time to process
* it right now.
*/
netif_rx(skb);
diff -ur a/drivers/net/wan/sdla_chdlc.c b/drivers/net/wan/sdla_chdlc.c
--- a/drivers/net/wan/sdla_chdlc.c Mon Feb 24 11:05:32 2003
+++ b/drivers/net/wan/sdla_chdlc.c Tue Feb 25 10:45:24 2003
@@ -3529,7 +3529,7 @@
card->devname);
}else{
/* IP addresses are the same and the link is up,
- * we dont have to do anything here. Therefore, exit */
+ * we don't have to do anything here. Therefore, exit */
return 0;
}
}
diff -ur a/drivers/net/wan/sdla_ppp.c b/drivers/net/wan/sdla_ppp.c
--- a/drivers/net/wan/sdla_ppp.c Mon Feb 24 11:05:11 2003
+++ b/drivers/net/wan/sdla_ppp.c Tue Feb 25 10:45:26 2003
@@ -3418,7 +3418,7 @@
card->devname);
}else{
/* IP addresses are the same and the link is up,
- * we dont have to do anything here. Therefore, exit */
+ * we don't have to do anything here. Therefore, exit */
return 0;
}
}
diff -ur a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
--- a/drivers/net/wan/sealevel.c Mon Feb 24 11:05:35 2003
+++ b/drivers/net/wan/sealevel.c Tue Feb 25 10:45:29 2003
@@ -62,7 +62,7 @@
skb->mac.raw=skb->data;
skb->dev=c->netdevice;
/*
- * Send it to the PPP layer. We dont have time to process
+ * Send it to the PPP layer. We don't have time to process
* it right now.
*/
netif_rx(skb);
diff -ur a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
--- a/drivers/net/wan/z85230.c Mon Feb 24 11:05:05 2003
+++ b/drivers/net/wan/z85230.c Tue Feb 25 10:45:32 2003
@@ -1634,7 +1634,7 @@
write_zsreg(c, R0, RES_Rx_CRC);
}
else
- /* Can't occur as we dont reenable the DMA irq until
+ /* Can't occur as we don't reenable the DMA irq until
after the flip is done */
printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name);

diff -ur a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
--- a/drivers/net/wireless/airo.c Mon Feb 24 11:05:08 2003
+++ b/drivers/net/wireless/airo.c Tue Feb 25 10:45:37 2003
@@ -2213,7 +2213,7 @@
/* Enable the interrupts */
OUT4500( ai, EVINTEN, STATUS_INTS );
/* Note there is a race condition between the last two lines that
- I dont know how to get rid of right now... */
+ I don't know how to get rid of right now... */
}

static void disable_interrupts( struct airo_info *ai ) {
diff -ur a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
--- a/drivers/s390/cio/qdio.h Mon Feb 24 11:05:11 2003
+++ b/drivers/s390/cio/qdio.h Tue Feb 25 10:45:56 2003
@@ -27,7 +27,7 @@
#define IQDIO_DELAY_TARGET 0
#define QDIO_BUSY_BIT_PATIENCE 2000 /* in microsecs */
#define IQDIO_GLOBAL_LAPS 2 /* GLOBAL_LAPS are not used as we */
-#define IQDIO_GLOBAL_LAPS_INT 1 /* dont global summary */
+#define IQDIO_GLOBAL_LAPS_INT 1 /* don't global summary */
#define IQDIO_LOCAL_LAPS 4
#define IQDIO_LOCAL_LAPS_INT 1
#define IQDIO_GLOBAL_SUMMARY_CC_MASK 2
diff -ur a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
--- a/drivers/sbus/char/envctrl.c Mon Feb 24 11:05:10 2003
+++ b/drivers/sbus/char/envctrl.c Tue Feb 25 10:46:00 2003
@@ -810,7 +810,7 @@
pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];

/* We only need to know if this child has fan status monitored.
- * We dont care which channels since we have the mask already.
+ * We don't care which channels since we have the mask already.
*/
pchild->mon_type[0] = ENVCTRL_FANSTAT_MON;
}
@@ -842,7 +842,7 @@
}

/* We only need to know if this child has global addressing
- * line monitored. We dont care which channels since we know
+ * line monitored. We don't care which channels since we know
* the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK).
*/
pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON;
@@ -858,7 +858,7 @@
pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];

/* We only need to know if this child has voltage status monitored.
- * We dont care which channels since we have the mask already.
+ * We don't care which channels since we have the mask already.
*/
pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON;
}
diff -ur a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
--- a/drivers/scsi/megaraid.c Mon Feb 24 11:05:04 2003
+++ b/drivers/scsi/megaraid.c Tue Feb 25 10:46:16 2003
@@ -1714,7 +1714,7 @@
unsigned char *data = (unsigned char *) SCpnt->request_buffer;
mega_driver_info driver_info;

- /* If this is not our command dont do anything */
+ /* If this is not our command don't do anything */
if (SCpnt->cmnd[0] != M_RD_DRIVER_IOCTL_INTERFACE)
return 0;

@@ -2879,7 +2879,7 @@
#endif
}

- /* Hmmm...Should we not make this more modularized so that in future we dont add
+ /* Hmmm...Should we not make this more modularized so that in future we don't add
for each firmware */

if (flag & BOARD_QUARTZ) {
@@ -2906,7 +2906,7 @@
* pci_vendor_id not subsysvid - AM
*/

- /* If we dont detect this valid subsystem vendor id's
+ /* If we don't detect this valid subsystem vendor id's
we refuse to load the driver
PART of PC200X compliance
*/
diff -ur a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
--- a/drivers/scsi/ncr53c8xx.c Mon Feb 24 11:05:14 2003
+++ b/drivers/scsi/ncr53c8xx.c Tue Feb 25 10:46:22 2003
@@ -3090,7 +3090,7 @@
case 0x8:
/*
** JUMP / CALL
- ** dont't relocate if relative :-)
+ ** don't relocate if relative :-)
*/
if (opcode & 0x00800000)
relocs = 0;
@@ -5852,7 +5852,7 @@
/*
** Why not to try the immediate lower divisor and to choose
** the one that allows the fastest output speed ?
- ** We dont want input speed too much greater than output speed.
+ ** We don't want input speed too much greater than output speed.
*/
if (div >= 1 && fak < 8) {
u_long fak2, per2;
diff -ur a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
--- a/drivers/scsi/qlogicfc.c Mon Feb 24 11:05:38 2003
+++ b/drivers/scsi/qlogicfc.c Tue Feb 25 10:46:27 2003
@@ -1563,7 +1563,7 @@
/*
* if any of the following are true we do not
* call scsi_done. if the status is CS_ABORTED
- * we dont have to call done because the upper
+ * we don't have to call done because the upper
* level should already know its aborted.
*/
if (hostdata->handle_serials[le_hand] != Cmnd->serial_number
diff -ur a/drivers/scsi/sym53c8xx.c b/drivers/scsi/sym53c8xx.c
--- a/drivers/scsi/sym53c8xx.c Mon Feb 24 11:05:36 2003
+++ b/drivers/scsi/sym53c8xx.c Tue Feb 25 10:46:36 2003
@@ -4631,7 +4631,7 @@
case 0x8:
/*
** JUMP / CALL
- ** dont't relocate if relative :-)
+ ** don't relocate if relative :-)
*/
if (opcode & 0x00800000)
relocs = 0;
@@ -7953,7 +7953,7 @@
/*
** Why not to try the immediate lower divisor and to choose
** the one that allows the fastest output speed ?
- ** We dont want input speed too much greater than output speed.
+ ** We don't want input speed too much greater than output speed.
*/
if (div >= 1 && fak < 8) {
u_long fak2, per2;
diff -ur a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c
--- a/drivers/scsi/sym53c8xx_2/sym_fw.c Mon Feb 24 11:06:01 2003
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.c Tue Feb 25 10:46:30 2003
@@ -539,7 +539,7 @@
case 0x8:
/*
* JUMP / CALL
- * dont't relocate if relative :-)
+ * don't relocate if relative :-)
*/
if (opcode & 0x00800000)
relocs = 0;
diff -ur a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c
--- a/drivers/usb/class/bluetty.c Mon Feb 24 11:05:39 2003
+++ b/drivers/usb/class/bluetty.c Tue Feb 25 10:46:39 2003
@@ -267,7 +267,7 @@
{
if (!bluetooth ||
bluetooth_paranoia_check (bluetooth, function)) {
- /* then say that we dont have a valid usb_bluetooth thing, which will
+ /* then say that we don't have a valid usb_bluetooth thing, which will
* end up generating -ENODEV return values */
return NULL;
}
diff -ur a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c
--- a/drivers/usb/media/konicawc.c Mon Feb 24 11:05:04 2003
+++ b/drivers/usb/media/konicawc.c Tue Feb 25 10:46:42 2003
@@ -266,7 +266,7 @@
sts &= ~0x40;
}

- /* work out the button status, but dont do
+ /* work out the button status, but don't do
anything with it for now */

if(button != cam->buttonsts) {
diff -ur a/drivers/usb/serial/keyspan_pda.S b/drivers/usb/serial/keyspan_pda.S
--- a/drivers/usb/serial/keyspan_pda.S Mon Feb 24 11:05:31 2003
+++ b/drivers/usb/serial/keyspan_pda.S Tue Feb 25 10:46:44 2003
@@ -1104,7 +1104,7 @@
;; [tx_ring_out] has been sent
;; if tx_ring_in == tx_ring_out, theres no work to do
;; there are (tx_ring_in - tx_ring_out) chars to be written
- ;; dont let _in lap _out
+ ;; don't let _in lap _out
;; cannot inc if tx_ring_in+1 == tx_ring_out
;; write [tx_ring_in+1] then tx_ring_in++
;; if (tx_ring_in+1 == tx_ring_out), overflow
diff -ur a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
--- a/drivers/usb/serial/usb-serial.h Mon Feb 24 11:06:03 2003
+++ b/drivers/usb/serial/usb-serial.h Tue Feb 25 10:46:47 2003
@@ -342,7 +342,7 @@
if (!port ||
port_paranoia_check (port, function) ||
serial_paranoia_check (port->serial, function)) {
- /* then say that we dont have a valid usb_serial thing, which will
+ /* then say that we don't have a valid usb_serial thing, which will
* end up genrating -ENODEV return values */
return NULL;
}
diff -ur a/drivers/usb/serial/xircom_pgs.S b/drivers/usb/serial/xircom_pgs.S
--- a/drivers/usb/serial/xircom_pgs.S Mon Feb 24 11:05:35 2003
+++ b/drivers/usb/serial/xircom_pgs.S Tue Feb 25 10:46:50 2003
@@ -1172,7 +1172,7 @@
;; [tx_ring_out] has been sent
;; if tx_ring_in == tx_ring_out, theres no work to do
;; there are (tx_ring_in - tx_ring_out) chars to be written
- ;; dont let _in lap _out
+ ;; don't let _in lap _out
;; cannot inc if tx_ring_in+1 == tx_ring_out
;; write [tx_ring_in+1] then tx_ring_in++
;; if (tx_ring_in+1 == tx_ring_out), overflow
diff -ur a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
--- a/drivers/video/sa1100fb.c Mon Feb 24 11:05:13 2003
+++ b/drivers/video/sa1100fb.c Tue Feb 25 10:46:52 2003
@@ -1370,7 +1370,7 @@
#ifdef CONFIG_SA1100_HUW_WEBPANEL
#error Move me into __sa1100fb_lcd_power and/or __sa1100fb_backlight_power
if (machine_is_huw_webpanel()) {
- // dont forget to set the control lines to zero (?)
+ // don't forget to set the control lines to zero (?)
DPRINTK("ShutDown HuW LCD controller\n");
BCR_clear(BCR_TFT_ENA + BCR_CCFL_POW + BCR_PWM_BACKLIGHT);
}
diff -ur a/drivers/video/sstfb.c b/drivers/video/sstfb.c
--- a/drivers/video/sstfb.c Mon Feb 24 11:05:35 2003
+++ b/drivers/video/sstfb.c Tue Feb 25 10:46:56 2003
@@ -35,7 +35,7 @@
wich one should i use ? is there any preferred one ? It seems ARGB is
the one ...
-TODO: in set_var check the validity of timings (hsync vsync)...
--TODO: check and recheck the use of sst_wait_idle : we dont flush the fifo via
+-TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
a nop command. so it's ok as long as the commands we pass don't go
through the fifo. warning: issuing a nop command seems to need pci_fifo
-FIXME: in case of failure in the init sequence, be sure we return to a safe
diff -ur a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
--- a/fs/xfs/xfs_attr_leaf.c Mon Feb 24 11:05:31 2003
+++ b/fs/xfs/xfs_attr_leaf.c Tue Feb 25 10:47:45 2003
@@ -1374,7 +1374,7 @@
count * sizeof(xfs_attr_leaf_entry_t) +
INT_GET(leaf->hdr.usedbytes, ARCH_CONVERT);
if (bytes > (state->blocksize >> 1)) {
- *action = 0; /* blk over 50%, dont try to join */
+ *action = 0; /* blk over 50%, don't try to join */
return(0);
}

diff -ur a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
--- a/fs/xfs/xfs_da_btree.c Mon Feb 24 11:05:39 2003
+++ b/fs/xfs/xfs_da_btree.c Tue Feb 25 10:47:48 2003
@@ -830,8 +830,8 @@
node = (xfs_da_intnode_t *)info;
count = INT_GET(node->hdr.count, ARCH_CONVERT);
if (count > (state->node_ents >> 1)) {
- *action = 0; /* blk over 50%, dont try to join */
- return(0); /* blk over 50%, dont try to join */
+ *action = 0; /* blk over 50%, don't try to join */
+ return(0); /* blk over 50%, don't try to join */
}

/*
diff -ur a/fs/xfs/xfs_dir_leaf.c b/fs/xfs/xfs_dir_leaf.c
--- a/fs/xfs/xfs_dir_leaf.c Mon Feb 24 11:05:43 2003
+++ b/fs/xfs/xfs_dir_leaf.c Tue Feb 25 10:47:50 2003
@@ -1341,7 +1341,7 @@
count * ((uint)sizeof(xfs_dir_leaf_name_t)-1) +
INT_GET(leaf->hdr.namebytes, ARCH_CONVERT);
if (bytes > (state->blocksize >> 1)) {
- *action = 0; /* blk over 50%, dont try to join */
+ *action = 0; /* blk over 50%, don't try to join */
return(0);
}

diff -ur a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
--- a/fs/xfs/xfs_dquot.c Mon Feb 24 11:05:31 2003
+++ b/fs/xfs/xfs_dquot.c Tue Feb 25 10:47:52 2003
@@ -840,7 +840,7 @@
* Given the file system, inode OR id, and type (UDQUOT/GDQUOT), return a
* a locked dquot, doing an allocation (if requested) as needed.
* When both an inode and an id are given, the inode's id takes precedence.
- * That is, if the id changes while we dont hold the ilock inside this
+ * That is, if the id changes while we don't hold the ilock inside this
* function, the new dquot is returned, not necessarily the one requested
* in the id argument.
*/
diff -ur a/include/asm-alpha/mman.h b/include/asm-alpha/mman.h
--- a/include/asm-alpha/mman.h Mon Feb 24 11:05:05 2003
+++ b/include/asm-alpha/mman.h Tue Feb 25 10:47:55 2003
@@ -39,7 +39,7 @@
#define MADV_SEQUENTIAL 2 /* expect sequential page references */
#define MADV_WILLNEED 3 /* will need these pages */
#define MADV_SPACEAVAIL 5 /* ensure resources are available */
-#define MADV_DONTNEED 6 /* dont need these pages */
+#define MADV_DONTNEED 6 /* don't need these pages */

/* compatibility flags */
#define MAP_ANON MAP_ANONYMOUS
diff -ur a/include/asm-alpha/rwsem.h b/include/asm-alpha/rwsem.h
--- a/include/asm-alpha/rwsem.h Mon Feb 24 11:05:42 2003
+++ b/include/asm-alpha/rwsem.h Tue Feb 25 10:47:57 2003
@@ -7,7 +7,7 @@
*/

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/asm-cris/namei.h b/include/asm-cris/namei.h
--- a/include/asm-cris/namei.h Mon Feb 24 11:05:33 2003
+++ b/include/asm-cris/namei.h Tue Feb 25 10:47:59 2003
@@ -9,7 +9,7 @@

/* used to find file-system prefixes for doing emulations
* see for example asm-sparc/namei.h
- * we dont use it...
+ * we don't use it...
*/

#define __emul_prefix() NULL
diff -ur a/include/asm-i386/rwsem.h b/include/asm-i386/rwsem.h
--- a/include/asm-i386/rwsem.h Mon Feb 24 11:05:29 2003
+++ b/include/asm-i386/rwsem.h Tue Feb 25 10:48:01 2003
@@ -33,7 +33,7 @@
#define _I386_RWSEM_H

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/asm-ia64/sn/pci/bridge.h b/include/asm-ia64/sn/pci/bridge.h
--- a/include/asm-ia64/sn/pci/bridge.h Mon Feb 24 11:05:11 2003
+++ b/include/asm-ia64/sn/pci/bridge.h Tue Feb 25 10:48:03 2003
@@ -1684,7 +1684,7 @@
/* RRB clear register */
#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r))

-/* Defines for the virtual channels so we dont hardcode 0-3 within code */
+/* Defines for the virtual channels so we don't hardcode 0-3 within code */
#define VCHAN0 0 /* virtual channel 0 (ie. the "normal" channel) */
#define VCHAN1 1 /* virtual channel 1 */
#define VCHAN2 2 /* virtual channel 2 - PIC only */
diff -ur a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h
--- a/include/asm-ia64/sn/pda.h Mon Feb 24 11:05:44 2003
+++ b/include/asm-ia64/sn/pda.h Tue Feb 25 10:48:06 2003
@@ -84,10 +84,10 @@
* the IA64 cpu_data area. A full page is allocated for the cp_data area for each
* cpu but only a small amout of the page is actually used. We put the SNIA PDA
* in the same page as the cpu_data area. Note that there is a check in the setup
- * code to verify that we dont overflow the page.
+ * code to verify that we don't overflow the page.
*
* Seems like we should should cache-line align the pda so that any changes in the
- * size of the cpu_data area dont change cache layout. Should we align to 32, 64, 128
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
* or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
*/
DECLARE_PER_CPU(struct pda_s, pda_percpu);
diff -ur a/include/asm-ia64/sn/sn1/mmzone_sn1.h b/include/asm-ia64/sn/sn1/mmzone_sn1.h
--- a/include/asm-ia64/sn/sn1/mmzone_sn1.h Mon Feb 24 11:05:47 2003
+++ b/include/asm-ia64/sn/sn1/mmzone_sn1.h Tue Feb 25 10:48:08 2003
@@ -130,7 +130,7 @@

/*
* Calculate a "goal" value to be passed to __alloc_bootmem_node for allocating structures on
- * nodes so that they dont alias to the same line in the cache as the previous allocated structure.
+ * nodes so that they don't alias to the same line in the cache as the previous allocated structure.
* This macro takes an address of the end of previous allocation, rounds it to a page boundary &
* changes the node number.
*/
diff -ur a/include/asm-ia64/sn/sn2/mmzone_sn2.h b/include/asm-ia64/sn/sn2/mmzone_sn2.h
--- a/include/asm-ia64/sn/sn2/mmzone_sn2.h Mon Feb 24 11:05:45 2003
+++ b/include/asm-ia64/sn/sn2/mmzone_sn2.h Tue Feb 25 10:48:10 2003
@@ -137,7 +137,7 @@

/*
* Calculate a "goal" value to be passed to __alloc_bootmem_node for allocating structures on
- * nodes so that they dont alias to the same line in the cache as the previous allocated structure.
+ * nodes so that they don't alias to the same line in the cache as the previous allocated structure.
* This macro takes an address of the end of previous allocation, rounds it to a page boundary &
* changes the node number.
*/
diff -ur a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
--- a/include/asm-ia64/sn/sn_cpuid.h Mon Feb 24 11:05:10 2003
+++ b/include/asm-ia64/sn/sn_cpuid.h Tue Feb 25 10:48:12 2003
@@ -47,7 +47,7 @@
* hard_smp_processor_id()- cpu_physical_id of current processor
* cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
* cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid>
- * * not real efficient - dont use in perf critical code
+ * * not real efficient - don't use in perf critical code
*
* LID - processor defined register (see PRM V2).
*
diff -ur a/include/asm-parisc/eisa_eeprom.h b/include/asm-parisc/eisa_eeprom.h
--- a/include/asm-parisc/eisa_eeprom.h Mon Feb 24 11:05:34 2003
+++ b/include/asm-parisc/eisa_eeprom.h Tue Feb 25 10:48:22 2003
@@ -25,7 +25,7 @@
u_int8_t ver_maj;
u_int8_t ver_min;
u_int8_t num_slots; /* number of EISA slots in system */
- u_int16_t csum; /* checksum, I dont know how to calulate this */
+ u_int16_t csum; /* checksum, I don't know how to calulate this */
u_int8_t pad[10];
} __attribute__ ((packed));

diff -ur a/include/asm-parisc/mman.h b/include/asm-parisc/mman.h
--- a/include/asm-parisc/mman.h Mon Feb 24 11:05:34 2003
+++ b/include/asm-parisc/mman.h Tue Feb 25 10:48:25 2003
@@ -32,7 +32,7 @@
#define MADV_RANDOM 1 /* expect random page references */
#define MADV_SEQUENTIAL 2 /* expect sequential page references */
#define MADV_WILLNEED 3 /* will need these pages */
-#define MADV_DONTNEED 4 /* dont need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */
#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */
#define MADV_VPS_INHERIT 7 /* Inherit parents page size */
diff -ur a/include/asm-ppc64/pgtable.h b/include/asm-ppc64/pgtable.h
--- a/include/asm-ppc64/pgtable.h Mon Feb 24 11:05:46 2003
+++ b/include/asm-ppc64/pgtable.h Tue Feb 25 10:48:28 2003
@@ -198,7 +198,7 @@
* Find an entry in a page-table-directory. We combine the address region
* (the high order N bits) and the pgd portion of the address.
*/
-/* to avoid overflow in free_pgtables we dont use PTRS_PER_PGD here */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x7ff)

#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
diff -ur a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h
--- a/include/asm-s390/ccwdev.h Mon Feb 24 11:05:42 2003
+++ b/include/asm-s390/ccwdev.h Tue Feb 25 10:48:30 2003
@@ -120,7 +120,7 @@
/* device is no longer available */
int (*set_online) (struct ccw_device *);
int (*set_offline) (struct ccw_device *);
- struct device_driver driver; /* higher level structure, dont init
+ struct device_driver driver; /* higher level structure, don't init
this from your driver */
char *name;
};
diff -ur a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h
--- a/include/asm-s390/rwsem.h Mon Feb 24 11:05:31 2003
+++ b/include/asm-s390/rwsem.h Tue Feb 25 10:49:11 2003
@@ -38,7 +38,7 @@
*/

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/asm-s390x/ccwdev.h b/include/asm-s390x/ccwdev.h
--- a/include/asm-s390x/ccwdev.h Mon Feb 24 11:05:41 2003
+++ b/include/asm-s390x/ccwdev.h Tue Feb 25 10:49:15 2003
@@ -120,7 +120,7 @@
/* device is no longer available */
int (*set_online) (struct ccw_device *);
int (*set_offline) (struct ccw_device *);
- struct device_driver driver; /* higher level structure, dont init
+ struct device_driver driver; /* higher level structure, don't init
this from your driver */
char *name;
};
diff -ur a/include/asm-s390x/rwsem.h b/include/asm-s390x/rwsem.h
--- a/include/asm-s390x/rwsem.h Mon Feb 24 11:05:14 2003
+++ b/include/asm-s390x/rwsem.h Tue Feb 25 10:49:16 2003
@@ -38,7 +38,7 @@
*/

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
--- a/include/asm-sparc64/rwsem.h Mon Feb 24 11:05:38 2003
+++ b/include/asm-sparc64/rwsem.h Tue Feb 25 10:49:18 2003
@@ -8,7 +8,7 @@
#define _SPARC64_RWSEM_H

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/asm-x86_64/rwsem.h b/include/asm-x86_64/rwsem.h
--- a/include/asm-x86_64/rwsem.h Mon Feb 24 11:05:39 2003
+++ b/include/asm-x86_64/rwsem.h Tue Feb 25 10:49:20 2003
@@ -34,7 +34,7 @@
#define _X8664_RWSEM_H

#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
#endif

#ifdef __KERNEL__
diff -ur a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
--- a/include/linux/rwsem-spinlock.h Mon Feb 24 11:05:33 2003
+++ b/include/linux/rwsem-spinlock.h Tue Feb 25 10:49:31 2003
@@ -9,7 +9,7 @@
#define _LINUX_RWSEM_SPINLOCK_H

#ifndef _LINUX_RWSEM_H
-#error please dont include linux/rwsem-spinlock.h directly, use linux/rwsem.h instead
+#error "please don't include linux/rwsem-spinlock.h directly, use linux/rwsem.h instead"
#endif

#include <linux/spinlock.h>
diff -ur a/include/net/irda/vlsi_ir.h b/include/net/irda/vlsi_ir.h
--- a/include/net/irda/vlsi_ir.h Mon Feb 24 11:05:34 2003
+++ b/include/net/irda/vlsi_ir.h Tue Feb 25 10:49:44 2003
@@ -382,7 +382,7 @@
* PLSWID = (pulsetime * freq / (BAUD+1)) - 1
* where pulsetime is the requested IrPHY pulse width
* and freq is 8(16)MHz for 40(48)MHz primary input clock
- * PREAMB: dont care for SIR
+ * PREAMB: don't care for SIR
*
* The nominal SIR pulse width is 3/16 bit time so we have PLSWID=12
* fixed for all SIR speeds at 40MHz input clock (PLSWID=24 at 48MHz).
@@ -401,7 +401,7 @@
* PREAMB = 1
*
* FIR-mode: BAUD = 0
- * PLSWID: dont care
+ * PLSWID: don't care
* PREAMB = 15
*/

diff -ur a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h
--- a/include/sound/cs46xx_dsp_spos.h Mon Feb 24 11:05:34 2003
+++ b/include/sound/cs46xx_dsp_spos.h Tue Feb 25 10:49:50 2003
@@ -36,12 +36,12 @@
#define SEGTYPE_SP_COEFFICIENT 0x00000004

#define DSP_SPOS_UU 0x0deadul /* unused */
-#define DSP_SPOS_DC 0x0badul /* dont care */
-#define DSP_SPOS_DC_DC 0x0bad0badul /* dont care */
+#define DSP_SPOS_DC 0x0badul /* don't care */
+#define DSP_SPOS_DC_DC 0x0bad0badul /* don't care */
#define DSP_SPOS_UUUU 0xdeadc0edul /* unused */
#define DSP_SPOS_UUHI 0xdeadul
#define DSP_SPOS_UULO 0xc0edul
-#define DSP_SPOS_DCDC 0x0badf1d0ul /* dont care */
+#define DSP_SPOS_DCDC 0x0badf1d0ul /* don't care */
#define DSP_SPOS_DCDCHI 0x0badul
#define DSP_SPOS_DCDCLO 0xf1d0ul

diff -ur a/kernel/exit.c b/kernel/exit.c
--- a/kernel/exit.c Mon Feb 24 11:05:42 2003
+++ b/kernel/exit.c Tue Feb 25 10:49:57 2003
@@ -482,7 +482,7 @@

static inline void reparent_thread(task_t *p, task_t *father, int traced)
{
- /* We dont want people slaying init. */
+ /* We don't want people slaying init. */
if (p->exit_signal != -1)
p->exit_signal = SIGCHLD;
p->self_exec_id++;
diff -ur a/kernel/fork.c b/kernel/fork.c
--- a/kernel/fork.c Mon Feb 24 11:05:07 2003
+++ b/kernel/fork.c Tue Feb 25 10:50:01 2003
@@ -446,7 +446,7 @@
tsk->clear_child_tid = NULL;

/*
- * We dont check the error code - if userspace has
+ * We don't check the error code - if userspace has
* not set up a proper pointer then tough luck.
*/
put_user(0, tidptr);
diff -ur a/kernel/futex.c b/kernel/futex.c
--- a/kernel/futex.c Mon Feb 24 11:05:13 2003
+++ b/kernel/futex.c Tue Feb 25 10:50:03 2003
@@ -297,7 +297,7 @@
time = schedule_timeout(time);
set_current_state(TASK_RUNNING);
/*
- * NOTE: we dont remove ourselves from the waitqueue because
+ * NOTE: we don't remove ourselves from the waitqueue because
* we are the only user of it.
*/
if (time == 0) {
diff -ur a/net/core/dev.c b/net/core/dev.c
--- a/net/core/dev.c Mon Feb 24 11:05:32 2003
+++ b/net/core/dev.c Tue Feb 25 10:50:27 2003
@@ -1215,7 +1215,7 @@
#ifdef OFFLINE_SAMPLE
static void sample_queue(unsigned long dummy)
{
-/* 10 ms 0r 1ms -- i dont care -- JHS */
+/* 10 ms 0r 1ms -- i don't care -- JHS */
int next_tick = 1;
int cpu = smp_processor_id();

diff -ur a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c
--- a/sound/drivers/mtpav.c Mon Feb 24 11:05:40 2003
+++ b/sound/drivers/mtpav.c Tue Feb 25 10:51:06 2003
@@ -102,7 +102,7 @@
/*
* defines
*/
-//#define USE_FAKE_MTP // dont actually read/write to MTP device (for debugging without an actual unit) (does not work yet)
+//#define USE_FAKE_MTP // don't actually read/write to MTP device (for debugging without an actual unit) (does not work yet)

// parallel port usage masks
#define SIGS_BYTE 0x08
@@ -763,7 +763,7 @@
if (err < 0)
goto __error;

- err = snd_card_register(mtp_card->card); // dont snd_card_register until AFTER all cards reources done!
+ err = snd_card_register(mtp_card->card); // don't snd_card_register until AFTER all cards reources done!

//printk("snd_card_register returned %d\n", err);
if (err < 0)
diff -ur a/sound/i2c/l3/uda1341.c b/sound/i2c/l3/uda1341.c
--- a/sound/i2c/l3/uda1341.c Mon Feb 24 11:05:32 2003
+++ b/sound/i2c/l3/uda1341.c Tue Feb 25 10:51:09 2003
@@ -494,7 +494,7 @@

DEBUG_NAME(KERN_DEBUG "info_enum where: %d\n", where);

- // this register we dont handle this way
+ // this register we don't handle this way
if (!uda1341_enum_items[where])
return -EINVAL;

diff -ur a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
--- a/sound/oss/dmasound/dmasound_awacs.c Mon Feb 24 11:05:15 2003
+++ b/sound/oss/dmasound/dmasound_awacs.c Tue Feb 25 10:51:20 2003
@@ -1354,7 +1354,7 @@
case AWACS_DACA:
wait_ms(10); /* Check this !!! */
daca_leave_sleep();
- break ; /* dont know how yet */
+ break ; /* don't know how yet */
case AWACS_BURGUNDY:
break ;
case AWACS_SCREAMER:
@@ -2960,7 +2960,7 @@
request_module("i2c-keywest");
#endif /* CONFIG_KMOD */
daca_init();
- break ; /* dont know how yet */
+ break ; /* don't know how yet */
case AWACS_BURGUNDY:
awacs_burgundy_init();
break ;
diff -ur a/sound/oss/maestro.c b/sound/oss/maestro.c
--- a/sound/oss/maestro.c Mon Feb 24 11:05:42 2003
+++ b/sound/oss/maestro.c Tue Feb 25 10:51:25 2003
@@ -3507,7 +3507,7 @@
* or
* - we're not a 2e, lesser chipps seem to have problems.
* - we're not on our _very_ small whitelist. some implemenetations
- * really dont' like the pm code, others require it.
+ * really don't like the pm code, others require it.
* feel free to expand this as required.
*/
#define SUBSYSTEM_VENDOR(x) (x&0xffff)
diff -ur a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
--- a/sound/pci/cs46xx/cs46xx_lib.c Mon Feb 24 11:05:06 2003
+++ b/sound/pci/cs46xx/cs46xx_lib.c Tue Feb 25 10:51:52 2003
@@ -24,7 +24,7 @@
*
* FINALLY: A credit to the developers Tom and Jordan
* at Cirrus for have helping me out with the DSP, however we
- * still dont have sufficient documentation and technical
+ * still don't have sufficient documentation and technical
* references to be able to implement all fancy feutures
* supported by the cs46xx DSP's.
* Benny <benny@hostmobility.com>
@@ -2401,7 +2401,7 @@
schedule_timeout(HZ/100);
} while (time_after_eq(end_time, jiffies));

- snd_printk("CS46xx secondary codec dont respond!\n");
+ snd_printk("CS46xx secondary codec don't respond!\n");
}
#endif

diff -ur a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c
--- a/sound/pci/cs46xx/dsp_spos_scb_lib.c Mon Feb 24 11:05:44 2003
+++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c Tue Feb 25 10:51:59 2003
@@ -1540,7 +1540,7 @@
cs46xx_dsp_enable_spdif_hw (chip);
}

- /* dont touch anything if SPDIF is open */
+ /* don't touch anything if SPDIF is open */
if ( ins->spdif_status_out & DSP_SPDIF_STATUS_PLAYBACK_OPEN) {
/* when cs46xx_iec958_post_close(...) is called it
will call this function if necessary depending on
@@ -1584,7 +1584,7 @@
{
dsp_spos_instance_t * ins = chip->dsp_spos_instance;

- /* dont touch anything if SPDIF is open */
+ /* don't touch anything if SPDIF is open */
if ( ins->spdif_status_out & DSP_SPDIF_STATUS_PLAYBACK_OPEN) {
ins->spdif_status_out &= ~DSP_SPDIF_STATUS_OUTPUT_ENABLED;
return -EBUSY;
diff -ur a/sound/sound_core.c b/sound/sound_core.c
--- a/sound/sound_core.c Mon Feb 24 11:05:47 2003
+++ b/sound/sound_core.c Tue Feb 25 10:52:02 2003
@@ -14,7 +14,7 @@
* --------------------
*
* Top level handler for the sound subsystem. Various devices can
- * plug into this. The fact they dont all go via OSS doesn't mean
+ * plug into this. The fact they don't all go via OSS doesn't mean
* they don't have to implement the OSS API. There is a lot of logic
* to keeping much of the OSS weight out of the code in a compatibility
* module, but it's up to the driver to rember to load it...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.056 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site