[lkml]   [2003]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: AGP backport from 2.5 to 2.4.21-pre4
Dana nedelja 23. februar 2003. 17:02 napisali ste:
> I tested on an Asus A7V8X motherboard (KT400) with a GeForce4 Ti 4200
> AGP8X. The module loads correctly, at last! It sets the apperture size
> correctly and all, but when I start XFree, I get do not get any
> graphical screen, but text mode garbage. Characters of all colors, with
> no sense at all. I had exactly the same problem in other kernels.
What kernels? Are you using old agpgart or new one with other kernels?

> I played a bit with the NvAGP option on XF86Config file. According to
> the documentation, 0 is PCI mode, 1 is NvAGP or fallback to PCI if
> failed, 2 is AGPGART mode or fallback to PCI if failed, 3 is autodetect.
> If I set it to 2, 3 or comment it, I got the same problem with the
> garbage and had to reset the PC. Setting it to 0 would make it run in
> PCI mode, and it always works. I tried setting it to 1, thinking that
> maybe the documentation is wrong. X started successfully, but the card
> was in PCI mode. I read the logs to confirm it, and indeed, the NvAGP
> module fails to identify the AGP chipset and falls back to PCI.
> I tried setting NvAGP to 2 again, to read the logs and see if there is
> something I could find out, but unfortunately the log had nothing but
> garbage. I tried several times with no success. The log is always garbage.
Try fetching latest nVidia drivers.

I'll try to isolate problem, and send patch if neccessery.

> - Sheng Long Gradilla

Tanasković Toplica

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:33    [W:0.276 / U:4.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site