lkml.org 
[lkml]   [2003]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2.5.62]: 2/3: Make SCSI low-level drivers also a seperate, complete selectable submenu
Date
so you can disable all SCSI lowlevel drivers at once.diff -Naurp linux-2.5.62-vanilla/drivers/scsi/Kconfig linux-2.5.62-mcp1/drivers/scsi/Kconfig
--- linux-2.5.62-vanilla/drivers/scsi/Kconfig 2003-02-10 19:38:53.000000000 +0100
+++ linux-2.5.62-mcp1/drivers/scsi/Kconfig 2003-02-18 13:45:28.000000000 +0100
@@ -173,27 +173,34 @@ config SCSI_LOGGING
menu "SCSI low-level drivers"
depends on SCSI!=n

+config SCSI_LOWLEVEL
+ bool "SCSI low-level drivers"
+ ---help---
+ This enables a list of SCSI low-level drivers.
+
+ If unsure, say N.
+
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
- depends on SGI_IP22 && SCSI
+ depends on SGI_IP22 && SCSI && SCSI_LOWLEVEL
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.

config SCSI_DECNCR
tristate "DEC NCR53C94 Scsi Driver"
- depends on DECSTATION && TC && SCSI
+ depends on DECSTATION && TC && SCSI && SCSI_LOWLEVEL
help
Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.

config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on DECSTATION && SCSI
+ depends on DECSTATION && SCSI && SCSI_LOWLEVEL

config BLK_DEV_3W_XXXX_RAID
tristate "3ware Hardware ATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -206,7 +213,7 @@ config BLK_DEV_3W_XXXX_RAID

config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
@@ -219,7 +226,7 @@ config SCSI_7000FASST

config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This driver supports the ACARD 870U/W SCSI host adapter.

@@ -230,7 +237,7 @@ config SCSI_ACARD

config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -247,7 +254,7 @@ config SCSI_AHA152X

config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
@@ -263,7 +270,7 @@ config SCSI_AHA1542

config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
- depends on EISA && SCSI
+ depends on EISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for a SCSI host adapter. It is explained in section
3.5 of the SCSI-HOWTO, available from
@@ -278,12 +285,13 @@ config SCSI_AHA1740

config SCSI_AACRAID
tristate "Adaptec AACRAID support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SCSI && PCI
+ depends on EXPERIMENTAL && PCI && SCSI && SCSI_LOWLEVEL

source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"

config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
+ depends on SCSI && SCSI_LOWLEVEL
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
@@ -328,7 +336,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !X86_64 && SCSI
+ depends on !X86_64 && SCSI && SCSI_LOWLEVEL
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -342,7 +350,7 @@ config SCSI_DPT_I2O

config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
@@ -356,7 +364,7 @@ config SCSI_ADVANSYS

config SCSI_IN2000
tristate "Always IN2000 SCSI support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
@@ -371,7 +379,7 @@ config SCSI_IN2000
# does not use pci dma and seems to be isa/onboard only for old machines
config SCSI_AM53C974
tristate "AM53/79C974 PCI SCSI support"
- depends on !X86_64 && SCSI && PCI
+ depends on !X86_64 && PCI && SCSI && SCSI_LOWLEVEL
---help---
This is support for the AM53/79C974 SCSI host adapters. Please read
<file:Documentation/scsi/AM53C974.txt> for details. Also, the
@@ -389,7 +397,7 @@ config SCSI_AM53C974

config SCSI_MEGARAID
tristate "AMI MegaRAID support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters.
@@ -401,7 +409,7 @@ config SCSI_MEGARAID

config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
@@ -419,7 +427,7 @@ config SCSI_BUSLOGIC

config SCSI_OMIT_FLASHPOINT
bool "Omit FlashPoint support"
- depends on SCSI_BUSLOGIC
+ depends on SCSI_BUSLOGIC && SCSI_LOWLEVEL
help
This option allows you to omit the FlashPoint support from the
BusLogic SCSI driver. The FlashPoint SCCB Manager code is
@@ -428,14 +436,14 @@ config SCSI_OMIT_FLASHPOINT

config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.

config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on SCSI && PCI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
This is support for Domex DMX3191D SCSI Host Adapters.

@@ -446,7 +454,7 @@ config SCSI_DMX3191D

config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -460,7 +468,7 @@ config SCSI_DTC3280

config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -514,7 +522,7 @@ config SCSI_EATA_MAX_TAGS

config SCSI_EATA_DMA
tristate "EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is support for the EATA-DMA protocol compliant SCSI Host
Adapters like the SmartCache III/IV, SmartRAID controller families
@@ -532,7 +540,7 @@ config SCSI_EATA_DMA

config SCSI_EATA_PIO
tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This driver supports all EATA-PIO protocol compliant SCSI Host
Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
@@ -548,7 +556,7 @@ config SCSI_EATA_PIO

config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -569,7 +577,7 @@ config SCSI_FUTURE_DOMAIN

config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && SCSI_LOWLEVEL
---help---
This is support for Future Domain MCS 600/700 MCA SCSI adapters.
Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
@@ -584,7 +592,7 @@ config SCSI_FD_MCS

config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
Formerly called GDT SCSI Disk Array Controller Support.

@@ -600,7 +608,7 @@ config SCSI_GDTH

config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
@@ -621,7 +629,7 @@ config SCSI_GENERIC_NCR5380

config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
@@ -637,7 +645,7 @@ config SCSI_GENERIC_NCR5380_MMIO

config SCSI_GENERIC_NCR53C400
bool "Enable NCR53c400 extensions"
- depends on SCSI_GENERIC_NCR5380
+ depends on SCSI_GENERIC_NCR5380 && SCSI_LOWLEVEL
help
This enables certain optimizations for the NCR53c400 SCSI cards.
You might as well try it out. Note that this driver will only probe
@@ -648,7 +656,7 @@ config SCSI_GENERIC_NCR53C400

config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && SCSI_LOWLEVEL
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
@@ -720,7 +728,7 @@ config IBMMCA_SCSI_DEV_RESET

config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on X86 && SCSI && PCI
+ depends on X86 && PCI && SCSI && SCSI_LOWLEVEL
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -736,7 +744,7 @@ config SCSI_IPS

config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on SCSI && PCI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -749,7 +757,7 @@ config SCSI_INITIO

config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on SCSI && PCI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -762,7 +770,7 @@ config SCSI_INIA100

config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
- depends on SCSI && PARPORT
+ depends on SCSI && PARPORT && SCSI_LOWLEVEL
---help---
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -791,7 +799,7 @@ config SCSI_PPA

config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
- depends on SCSI && PARPORT
+ depends on SCSI && PARPORT && SCSI_LOWLEVEL
---help---
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -820,7 +828,7 @@ config SCSI_IMM

config SCSI_IZIP_EPP16
bool "ppa/imm option - Use slow (but safe) EPP-16"
- depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ depends on PARPORT && (SCSI_PPA || SCSI_IMM) && SCSI_LOWLEVEL
---help---
EPP (Enhanced Parallel Port) is a standard for parallel ports which
allows them to act as expansion buses that can handle up to 64
@@ -835,7 +843,7 @@ config SCSI_IZIP_EPP16

config SCSI_IZIP_SLOW_CTR
bool "ppa/imm option - Assume slow parport control register"
- depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ depends on PARPORT && (SCSI_PPA || SCSI_IMM) && SCSI_LOWLEVEL
help
Some parallel ports are known to have excessive delays between
changing the parallel port control register and good data being
@@ -849,7 +857,7 @@ config SCSI_IZIP_SLOW_CTR

config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
help
This is support for the NCR53c406a SCSI host adapter. For user
configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
@@ -863,7 +871,7 @@ config SCSI_NCR53C406A

config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && SCSI_LOWLEVEL
help
This is a driver for the MicroChannel Dual 700 card produced by
NCR and commonly used in 345x/35xx/4100 class machines. It always
@@ -879,7 +887,7 @@ config 53C700_IO_MAPPED

config SCSI_LASI700
tristate "HP LASI SCSI support for 53c700/710"
- depends on PARISC && SCSI
+ depends on PARISC && SCSI && SCSI_LOWLEVEL
help
This is a driver for the lasi baseboard in some parisc machines
which is based on the 53c700 chip. Will also support LASI subsystems
@@ -899,7 +907,7 @@ config 53C700_LE_ON_BE

config SCSI_NCR53C7xx
tristate "NCR53c7,8xx SCSI support"
- depends on SCSI && PCI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
---help---
This is a driver for the 53c7 and 8xx NCR family of SCSI
controllers, not to be confused with the NCR 5380 controllers. It
@@ -953,7 +961,7 @@ config SCSI_NCR53C7xx_DISCONNECT

config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
---help---
This driver supports the whole NCR53C8XX/SYM53C8XX family of
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
@@ -969,7 +977,7 @@ config SCSI_SYM53C8XX_2

config SCSI_ZALON
tristate "Zalon SCSI support"
- depends on GSC && SCSI
+ depends on GSC && SCSI && SCSI_LOWLEVEL
help
The Zalon is a GSC/HSC bus interface chip that sits between the
PA-RISC processor and the NCR 53c720 SCSI controller on C100,
@@ -979,7 +987,7 @@ config SCSI_ZALON

config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
int "DMA addressing mode"
- depends on SCSI_SYM53C8XX_2
+ depends on SCSI_SYM53C8XX_2 && SCSI_LOWLEVEL
default "1"
---help---
This option only applies to PCI-SCSI chip that are PCI DAC capable
@@ -1006,7 +1014,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MOD

config SCSI_SYM53C8XX_DEFAULT_TAGS
int "default tagged command queue depth"
- depends on SCSI_SYM53C8XX_2
+ depends on SCSI_SYM53C8XX_2 && SCSI_LOWLEVEL
default "16"
help
This is the default value of the command queue depth the driver will
@@ -1016,7 +1024,7 @@ config SCSI_SYM53C8XX_DEFAULT_TAGS

config SCSI_SYM53C8XX_MAX_TAGS
int "maximum number of queued commands"
- depends on SCSI_SYM53C8XX_2
+ depends on SCSI_SYM53C8XX_2 && SCSI_LOWLEVEL
default "64"
help
This option allows you to specify the maximum number of commands
@@ -1026,14 +1034,14 @@ config SCSI_SYM53C8XX_MAX_TAGS

config SCSI_SYM53C8XX_IOMAPPED
bool "use normal IO"
- depends on SCSI_SYM53C8XX_2
+ depends on SCSI_SYM53C8XX_2 && SCSI_LOWLEVEL
help
If you say Y here, the driver will preferently use normal IO rather than
memory mapped IO.

config SCSI_NCR53C8XX
tristate "NCR53C8XX SCSI support"
- depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI
+ depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI && SCSI_LOWLEVEL
---help---
This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
of PCI-SCSI controllers. This driver supports parity checking,
@@ -1054,7 +1062,7 @@ config SCSI_NCR53C8XX

config SCSI_SYM53C8XX
tristate "SYM53C8XX SCSI support"
- depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI
+ depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI && SCSI_LOWLEVEL
---help---
This driver supports all the features of recent 53C8XX chips (used
in PCI SCSI controllers), notably the hardware phase mismatch
@@ -1081,7 +1089,7 @@ config SCSI_SYM53C8XX

config SCSI_NCR53C8XX_DEFAULT_TAGS
int "default tagged command queue depth"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON)
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_LOWLEVEL
default "8"
---help---
"Tagged command queuing" is a feature of SCSI-2 which improves
@@ -1107,7 +1115,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS

config SCSI_NCR53C8XX_MAX_TAGS
int "maximum number of queued commands"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON)
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_LOWLEVEL
default "32"
---help---
This option allows you to specify the maximum number of commands
@@ -1124,7 +1132,7 @@ config SCSI_NCR53C8XX_MAX_TAGS

config SCSI_NCR53C8XX_SYNC
int "synchronous transfers frequency in MHz"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON)
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_LOWLEVEL
default "20"
---help---
The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
@@ -1158,7 +1166,7 @@ config SCSI_NCR53C8XX_SYNC

config SCSI_NCR53C8XX_PROFILE
bool "enable profiling"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON)
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_LOWLEVEL
help
This option allows you to enable profiling information gathering.
These statistics are not very accurate due to the low frequency
@@ -1169,7 +1177,7 @@ config SCSI_NCR53C8XX_PROFILE

config SCSI_NCR53C8XX_IOMAPPED
bool "use normal IO"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && !SCSI_ZALON
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && !SCSI_ZALON && SCSI_LOWLEVEL
help
If you say Y here, the driver will use normal IO, as opposed to
memory mapped IO. Memory mapped IO has less latency than normal IO
@@ -1182,7 +1190,7 @@ config SCSI_NCR53C8XX_IOMAPPED

config SCSI_NCR53C8XX_PQS_PDS
bool "include support for the NCR PQS/PDS SCSI card"
- depends on (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && SCSI_SYM53C8XX
+ depends on (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && SCSI_SYM53C8XX && SCSI_LOWLEVEL
help
Say Y here if you have a special SCSI adapter produced by NCR
corporation called a PCI Quad SCSI or PCI Dual SCSI. You do not need
@@ -1194,7 +1202,7 @@ config SCSI_NCR53C8XX_PQS_PDS

config SCSI_NCR53C8XX_NO_DISCONNECT
bool "not allow targets to disconnect"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 && SCSI_LOWLEVEL
help
This option is only provided for safety if you suspect some SCSI
device of yours to not support properly the target-disconnect
@@ -1204,7 +1212,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT

config SCSI_NCR53C8XX_SYMBIOS_COMPAT
bool "assume boards are SYMBIOS compatible (EXPERIMENTAL)"
- depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && EXPERIMENTAL
+ depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX || SCSI_ZALON) && EXPERIMENTAL && SCSI_LOWLEVEL && SCSI_LOWLEVEL
---help---
This option allows you to enable some features depending on GPIO
wiring. These General Purpose Input/Output pins can be used for
@@ -1224,7 +1232,7 @@ config SCSI_NCR53C8XX_SYMBIOS_COMPAT

config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && SCSI_LOWLEVEL
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
@@ -1237,7 +1245,7 @@ config SCSI_MCA_53C9X

config SCSI_PAS16
tristate "PAS16 SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
@@ -1252,7 +1260,7 @@ config SCSI_PAS16

config SCSI_PCI2000
tristate "PCI2000 support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1265,7 +1273,7 @@ config SCSI_PCI2000

config SCSI_PCI2220I
tristate "PCI2220i support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1278,7 +1286,7 @@ config SCSI_PCI2220I

config SCSI_PSI240I
tristate "PSI240i support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
help
This is support for the PSI240i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1291,7 +1299,7 @@ config SCSI_PSI240I

config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
@@ -1313,7 +1321,7 @@ config SCSI_QLOGIC_FAS

config SCSI_QLOGIC_ISP
tristate "Qlogic ISP SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
---help---
This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
@@ -1333,7 +1341,7 @@ config SCSI_QLOGIC_ISP

config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.

@@ -1352,7 +1360,7 @@ config SCSI_QLOGIC_FC_FIRMWARE

config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1280 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
help
Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.

@@ -1363,7 +1371,7 @@ config SCSI_QLOGIC_1280

config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA && SCSI && SCSI_LOWLEVEL
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1379,7 +1387,7 @@ config SCSI_SEAGATE
# definitely looks note 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
- depends on (EISA || MCA && !X86_64) && SCSI
+ depends on (EISA || MCA && !X86_64) && SCSI && SCSI_LOWLEVEL
---help---
This driver for NCR53c710 based SCSI host adapters.

@@ -1392,7 +1400,7 @@ config 53C700_IO_MAPPED

config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
adapter that comes with some HP scanners. This driver requires that
@@ -1413,7 +1421,7 @@ config SCSI_SYM53C416

config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && SCSI_LOWLEVEL
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
@@ -1450,7 +1458,7 @@ config SCSI_DC390T_NOGENSUPP

config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
- depends on SCSI && ISA
+ depends on ISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
@@ -1467,7 +1475,7 @@ config SCSI_T128

config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
@@ -1518,7 +1526,7 @@ config SCSI_U14_34F_MAX_TAGS

config SCSI_ULTRASTOR
tristate "UltraStor SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA && SCSI && SCSI_LOWLEVEL
---help---
This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
adapter family. This driver is explained in section 3.12 of the
@@ -1537,7 +1545,7 @@ config SCSI_ULTRASTOR

config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1550,7 +1558,7 @@ config SCSI_NSP32

config SCSI_DEBUG
tristate "SCSI debugging host simulator"
- depends on SCSI
+ depends on SCSI && SCSI_LOWLEVEL
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
@@ -1563,7 +1571,7 @@ config SCSI_DEBUG

config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
- depends on ALL_PPC && SCSI
+ depends on ALL_PPC && SCSI && SCSI_LOWLEVEL
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
@@ -1594,7 +1602,7 @@ config SCSI_MESH_RESET_DELAY_MS

config SCSI_MAC53C94
tristate "53C94 (Power Mac external SCSI) support"
- depends on ALL_PPC && SCSI
+ depends on ALL_PPC && SCSI && SCSI_LOWLEVEL
help
On Power Macintoshes (and clones) with two SCSI buses, the external
SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
@@ -1618,7 +1626,7 @@ config JAZZ_ESP

config A3000_SCSI
tristate "A3000 WD33C93A support"
- depends on AMIGA && SCSI
+ depends on AMIGA && SCSI && SCSI_LOWLEVEL
help
If you have an Amiga 3000 and have SCSI devices connected to the
built-in SCSI controller, say Y. Otherwise, say N. This driver is
@@ -1635,7 +1643,7 @@ config A4000T_SCSI

config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
say N. This driver is also available as a module ( = code which can
@@ -1645,7 +1653,7 @@ config A2091_SCSI

config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
---help---
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
@@ -1660,7 +1668,7 @@ config GVP11_SCSI

config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have an Amiga with an original (MkI) Phase5 Cyberstorm
accelerator board and the optional Cyberstorm SCSI controller,
@@ -1668,7 +1676,7 @@ config CYBERSTORM_SCSI

config CYBERSTORMII_SCSI
tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
and the optional Cyberstorm SCSI controller, say Y. Otherwise,
@@ -1676,7 +1684,7 @@ config CYBERSTORMII_SCSI

config BLZ2060_SCSI
tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
and want to use the onboard SCSI controller, say Y. Otherwise,
@@ -1684,7 +1692,7 @@ config BLZ2060_SCSI

config BLZ1230_SCSI
tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
1260 accelerator, and the optional SCSI module, say Y. Otherwise,
@@ -1692,7 +1700,7 @@ config BLZ1230_SCSI

config FASTLANE_SCSI
tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
+ depends on ZORRO && SCSI && SCSI_LOWLEVEL
help
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
@@ -1722,7 +1730,7 @@ config BLZ603EPLUS_SCSI

config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && EXPERIMENTAL && SCSI
+ depends on ZORRO && EXPERIMENTAL && SCSI && SCSI_LOWLEVEL
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one,
diff -Naurp linux-2.5.62-vanilla/drivers/scsi/aic7xxx/Kconfig.aic79xx linux-2.5.62-mcp1/drivers/scsi/aic7xxx/Kconfig.aic79xx
--- linux-2.5.62-vanilla/drivers/scsi/aic7xxx/Kconfig.aic79xx 2003-02-10 19:38:29.000000000 +0100
+++ linux-2.5.62-mcp1/drivers/scsi/aic7xxx/Kconfig.aic79xx 2003-02-18 13:45:28.000000000 +0100
@@ -4,7 +4,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI
+ depends on PCI && SCSI_LOWLEVEL
help
This driver supports all of Adaptec's Ultra 320 PCI-X
based SCSI controllers.
diff -Naurp linux-2.5.62-vanilla/drivers/scsi/aic7xxx/Kconfig.aic7xxx linux-2.5.62-mcp1/drivers/scsi/aic7xxx/Kconfig.aic7xxx
--- linux-2.5.62-vanilla/drivers/scsi/aic7xxx/Kconfig.aic7xxx 2003-02-10 19:38:18.000000000 +0100
+++ linux-2.5.62-mcp1/drivers/scsi/aic7xxx/Kconfig.aic7xxx 2003-02-18 13:45:28.000000000 +0100
@@ -4,6 +4,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)"
+ depends on SCSI_LOWLEVEL
---help---
This driver supports all of Adaptec's Fast through Ultra 160 PCI
based SCSI controllers as well as the aic7770 based EISA and VLB
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.053 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site