Messages in this thread | | | Date | Tue, 18 Feb 2003 14:07:48 +0100 (CET) | From | kernel@ddx ... | Subject | no promise PDC2070/PDC20267 with 2.5.62 (works ok with 2.4.20) |
| |
intel se7500cw2 dual xeon mainbord (with dual 2GHz) with onboard ide and onboard fasttrak100 (PDC20267) and pci tx4 (PDC2070) (and 3ware 7850/adaptec 2940uw)
kernel 2.5.62 boot dmesg output :
ICH3: IDE controller at PCI slot 00:1f.1 ICH3: chipset revision 2 ICH3: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x7048-0x704f, BIOS settings: hdc:pio, hdd:pio hda: WDC WD1800BB-00DAA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: WDC WD1800BB-00DAA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20270: IDE controller at PCI slot 03:01.0 PDC20270: chipset revision 2 PDC20270: not 100%% native mode: will probe irqs later PDC20270: neither IDE port enabled (BIOS) PDC20270: ROM enabled at 0x000dc000 PDC20270: neither IDE port enabled (BIOS) PDC20267: IDE controller at PCI slot 05:06.0 PDC20267: chipset revision 2 PDC20267: not 100%% native mode: will probe irqs later PDC20267: neither IDE port enabled (BIOS)
kernel 2.4.20 boot dmesg output :
ICH3: BIOS setup was incomplete. ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x7048-0x704f, BIOS settings: hdc:pio, hdd:pio PDC20270: IDE controller on PCI bus 03 dev 08 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later PDC20270: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide2: BM-DMA at 0x9040-0x9047, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9048-0x904f, BIOS settings: hdg:pio, hdh:pio PDC20270: IDE controller on PCI bus 03 dev 10 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later PDC20270: ROM enabled at 0x000dc000 PDC20270: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide4: BM-DMA at 0x90c0-0x90c7, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x90c8-0x90cf, BIOS settings: hdk:pio, hdl:pio PDC20267: IDE controller on PCI bus 05 dev 30 PCI: Found IRQ 11 for device 05:06.0 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide6: BM-DMA at 0xb800-0xb807, BIOS settings: hdm:pio, hdn:pio ide7: BM-DMA at 0xb808-0xb80f, BIOS settings: hdo:pio, hdp:pio hda: WDC WD1800BB-00DAA0, ATA DISK drive hdc: WDC WD1800BB-00DAA0, ATA DISK drive hde: WDC WD1800BB-00DAA0, ATA DISK drive hdi: WDC WD1800BB-00DAA0, ATA DISK drive hdk: WDC WD1800BB-00DAA0, ATA DISK drive hdm: WDC WD1800BB-00DAA0, ATA DISK drive hdo: WDC WD1800BB-00DAA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x9000-0x9007,0x9012 on irq 10 ide4 at 0x9080-0x9087,0x9092 on irq 10 ide5 at 0x90a0-0x90a7,0x90b2 on irq 10 ide6 at 0xb850-0xb857,0xb846 on irq 11 ide7 at 0xb848-0xb84f,0xb842 on irq 11 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |