lkml.org 
[lkml]   [2003]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[2.5.61][SCSI][AIC7xxx] Problems with Tape driver
Date
While attempting to cpio extract data from the tape I got this in the logs. Is 
this due to corrupt data on tape or the tape driver having a fit? ;-)

We are the following SCSI card and tape drive:

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

Vendor: HP Model: T4000s Rev: 1.10
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20021214, fixed bufsize 32768, wrt 30720, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0
st0: try direct i/o: yes, max page reachable by HBA 1048575


Problems below:
==========
st0: Error with sense data: Info fld=0x4, Current stst0: sense = f0 4
ASC=40 ASCQ=81
Raw sense data:0xf0 0x00 0x04 0x00 0x00 0x00 0x04 0x10 0x00 0x00 0x00 0x00
0x40 0x81 0x00 0x00 0x00 0x00 0x13 0x01 0x00 0x00 0x00 0x00
scsi0:0:4:0: Attempting to queue an ABORT message
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State while idle, at SEQADDR 0x7
Card was paused
ACCUM = 0xb7, SINDEX = 0x47, DINDEX = 0x25, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x0] SCSIRATE[0x0]
SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0xa]:(PHASECHG|BUSFREE)
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0]
DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP)
STACK: 0x0 0x163 0x1a4 0x3
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries: 0:3
QOUTFIFO entries:
Sequencer Free SCB List: 1 2
Sequencer SCB Info:
0 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x47]
SCB_LUN[0x0] SCB_TAG[0x3]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
Pending list:
3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 1 0
Untagged Q(4): 3
DevQ(0:4:0): 0 waiting

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(scsi0:A:4:0): Device is disconnected, re-queuing SCB
Recovery code sleeping
(scsi0:A:4:0): Abort Message Sent
(scsi0:A:4:0): SCB 3 - Abort Completed.
Recovery SCB completes
Recovery code awake
aic7xxx_abort returns 0x2002
st0: Error with sense data: Current stst0: sense = 70 6
ASC=28 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00
0x28 0x00 0x00 0x00 0x00 0x00 0x01 0x12 0x00 0x00 0x00 0x00
st0: Error with sense data: Current stst0: sense = 70 4
ASC=40 ASCQ=b6
Raw sense data:0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00
0x40 0xb6 0x00 0x00 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x00

--
Shawn Starr
UNIX Systems Administrator, Operations
Datawire Communication Networks Inc.
10 Carlson Court, Suite 300
Toronto, ON, M9W 6L2
T: 416-213-2001 ext 179 F: 416-213-2008
shawn.starr@datawire.net
"The power to Transact" - http://www.datawire.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.030 / U:5.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site