lkml.org 
[lkml]   [2003]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCHSET] PC-9800 subarch. support for 2.5.61 (5/26) char device
This is patchset to support NEC PC-9800 subarchitecture
against 2.5.61 (5/26).

Real time clock driver and printer driver for PC98.

diff -Nru linux-2.5.61/drivers/char/Kconfig linux98-2.5.61/drivers/char/Kconfig
--- linux-2.5.61/drivers/char/Kconfig 2003-02-15 08:51:08.000000000 +0900
+++ linux98-2.5.61/drivers/char/Kconfig 2003-02-16 17:19:03.000000000 +0900
@@ -575,6 +575,17 @@
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.

+config PC9800_OLDLP
+ tristate "NEC PC-9800 old-style printer port support"
+ depends on X86_PC9800 && !PARPORT
+ ---help---
+ If you intend to attach a printer to the parallel port of NEC PC-9801
+ /PC-9821 with OLD compatibility mode, Say Y.
+
+config PC9800_OLDLP_CONSOLE
+ bool "Support for console on line printer"
+ depends on PC9800_OLDLP
+
source "drivers/i2c/Kconfig"


@@ -774,7 +785,7 @@

config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64
+ depends on !PPC32 && !PARISC && !IA64 && !X86_PC9800
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -833,6 +844,15 @@
bool "EFI Real Time Clock Services"
depends on IA64

+config RTC98
+ tristate "NEC PC-9800 Real Time Clock Support"
+ depends on X86_PC9800
+ default y
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+
config H8
bool "Tadpole ANA H8 Support (OBSOLETE)"
depends on OBSOLETE && ALPHA_BOOK1
diff -Nru linux-2.5.60/drivers/char/Makefile linux98-2.5.60/drivers/char/Makefile
--- linux-2.5.60/drivers/char/Makefile 2003-02-11 03:38:54.000000000 +0900
+++ linux98-2.5.60/drivers/char/Makefile 2003-02-11 11:19:09.000000000 +0900
@@ -44,6 +44,7 @@

obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
+obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o

obj-$(CONFIG_BUSMOUSE) += busmouse.o
obj-$(CONFIG_DTLK) += dtlk.o
@@ -51,6 +52,7 @@
obj-$(CONFIG_APPLICOM) += applicom.o
obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_RTC) += rtc.o
+obj-$(CONFIG_RTC98) += upd4990a.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),)
diff -Nru linux-2.5.61/drivers/char/lp_old98.c linux98-2.5.61/drivers/char/lp_old98.c
--- linux-2.5.61/drivers/char/lp_old98.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/drivers/char/lp_old98.c 2003-02-17 19:10:26.000000000 +0900
@@ -0,0 +1,555 @@
+/*
+ * linux/drivers/char/lp_old98.c
+ *
+ * printer port driver for ancient PC-9800s with no bidirectional port support
+ *
+ * Copyright (C) 1998,99 Kousuke Takai <tak@kmc.kyoto-u.ac.jp>,
+ * Kyoto University Microcomputer Club
+ *
+ * This driver is based on and has compatibility with `lp.c',
+ * generic PC printer port driver.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/version.h>
+#include <linux/fs.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <linux/lp.h>
+
+/*
+ * I/O port numbers
+ */
+#define LP_PORT_DATA 0x40
+#define LP_PORT_STATUS (LP_PORT_DATA + 2)
+#define LP_PORT_STROBE (LP_PORT_DATA + 4)
+#define LP_PORT_CONTROL (LP_PORT_DATA + 6)
+
+#define LP_PORT_H98MODE 0x0448
+#define LP_PORT_EXTMODE 0x0149
+
+/*
+ * bit mask for I/O
+ */
+#define LP_MASK_nBUSY (1 << 2)
+#define LP_MASK_nSTROBE (1 << 7)
+
+#define LP_CONTROL_ASSERT_STROBE (0x0e)
+#define LP_CONTROL_NEGATE_STROBE (0x0f)
+
+/*
+ * Acceptable maximum value for non-privileged user for LPCHARS ioctl.
+ */
+#define LP_CHARS_NOPRIV_MAX 65535
+
+#define DC1 '\x11'
+#define DC3 '\x13'
+
+/* PC-9800s have at least and at most one old-style printer port. */
+static struct lp_struct lp = {
+ /* Following `TAG: INITIALIZER' notations are GNU CC extension. */
+ .flags = LP_EXIST | LP_ABORTOPEN,
+ .chars = LP_INIT_CHAR,
+ .time = LP_INIT_TIME,
+ .wait = LP_INIT_WAIT,
+};
+
+static int dc1_check = 0;
+static spinlock_t lp_old98_lock = SPIN_LOCK_UNLOCKED;
+
+
+#undef LP_OLD98_DEBUG
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+static struct console lp_old98_console; /* defined later */
+static __typeof__(lp_old98_console.flags) saved_console_flags;
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD (lp_old98_waitq);
+
+static void lp_old98_timer_function(unsigned long data);
+
+static void lp_old98_timer_function(unsigned long data)
+{
+ if (inb(LP_PORT_STATUS) & LP_MASK_nBUSY)
+ wake_up_interruptible(&lp_old98_waitq);
+ else {
+ struct timer_list *t = (struct timer_list *) data;
+
+ t->expires = jiffies + 1;
+ add_timer(t);
+ }
+}
+
+static inline int lp_old98_wait_ready(void)
+{
+ struct timer_list timer;
+
+ init_timer(&timer);
+ timer.function = lp_old98_timer_function;
+ timer.expires = jiffies + 1;
+ timer.data = (unsigned long)&timer;
+ add_timer(&timer);
+ interruptible_sleep_on(&lp_old98_waitq);
+ del_timer(&timer);
+ return signal_pending(current);
+}
+
+static inline int lp_old98_char(char lpchar)
+{
+ unsigned long count = 0;
+#ifdef LP_STATS
+ int tmp;
+#endif
+
+ while (!(inb(LP_PORT_STATUS) & LP_MASK_nBUSY)) {
+ count++;
+ if (count >= lp.chars)
+ return 0;
+ }
+
+ outb(lpchar, LP_PORT_DATA);
+
+#ifdef LP_STATS
+ /*
+ * Update lp statsistics here (and between next two outb()'s).
+ * Time to compute it is part of storobe delay.
+ */
+ if (count > lp.stats.maxwait) {
+#ifdef LP_OLD98_DEBUG
+ printk(KERN_DEBUG "lp_old98: success after %d counts.\n",
+ count);
+#endif
+ lp.stats.maxwait = count;
+ }
+ count *= 256;
+ tmp = count - lp.stats.meanwait;
+ if (tmp < 0)
+ tmp = -tmp;
+#endif
+ __const_udelay(lp.wait * 4);
+
+ /* negate PSTB# (activate strobe) */
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+
+#ifdef LP_STATS
+ lp.stats.meanwait = (255 * lp.stats.meanwait + count + 128) / 256;
+ lp.stats.mdev = (127 * lp.stats.mdev + tmp + 64) / 128;
+ lp.stats.chars ++;
+#endif
+
+ __const_udelay(lp.wait * 4);
+
+ /* assert PSTB# (deactivate strobe) */
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+
+ return 1;
+}
+
+#if LINUX_VERSION_CODE < 0x20200
+static long lp_old98_write(struct inode * inode, struct file * file,
+ const char * buf, unsigned long count)
+#else
+static ssize_t lp_old98_write(struct file * file,
+ const char * buf, size_t count,
+ loff_t *dummy)
+#endif
+{
+ unsigned long total_bytes_written = 0;
+
+ if (!access_ok(VERIFY_READ, buf, count))
+ return -EFAULT;
+
+#ifdef LP_STATS
+ if (jiffies - lp.lastcall > lp.time)
+ lp.runchars = 0;
+ lp.lastcall = jiffies;
+#endif
+
+ do {
+ unsigned long bytes_written = 0;
+ unsigned long copy_size
+ = (count < LP_BUFFER_SIZE ? count : LP_BUFFER_SIZE);
+
+ if (__copy_from_user(lp.lp_buffer, buf, copy_size))
+ return -EFAULT;
+
+ while (bytes_written < copy_size) {
+ if (lp_old98_char(lp.lp_buffer[bytes_written]))
+ bytes_written ++;
+ else {
+#ifdef LP_STATS
+ int rc = lp.runchars + bytes_written;
+
+ if (rc > lp.stats.maxrun)
+ lp.stats.maxrun = rc;
+
+ lp.stats.sleeps ++;
+#endif
+#ifdef LP_OLD98_DEBUG
+ printk(KERN_DEBUG
+ "lp_old98: sleeping at %d characters"
+ " for %d jiffies\n",
+ lp.runchars, lp.time);
+ lp.runchars = 0;
+#endif
+ if (lp_old98_wait_ready())
+ return ((total_bytes_written
+ + bytes_written)
+ ? : -EINTR);
+ }
+ }
+ total_bytes_written += bytes_written;
+ buf += bytes_written;
+#ifdef LP_STATS
+ lp.runchars += bytes_written;
+#endif
+ count -= bytes_written;
+ } while (count > 0);
+
+ return total_bytes_written;
+}
+
+static int lp_old98_open(struct inode * inode, struct file * file)
+{
+ if (minor(inode->i_rdev) != 0)
+ return -ENXIO;
+
+ if (!try_module_get(THIS_MODULE))
+ return -EBUSY;
+
+ if (lp.flags & LP_BUSY)
+ return -EBUSY;
+
+ if (dc1_check && (lp.flags & LP_ABORTOPEN)
+ && !(file->f_flags & O_NONBLOCK)) {
+ /*
+ * Check whether printer is on-line.
+ * PC-9800's old style port have only BUSY# as status input,
+ * so that it is impossible to distinguish that the printer is
+ * ready and that the printer is off-line or not connected
+ * (in both case BUSY# is in the same state). So:
+ *
+ * (1) output DC1 (0x11) to printer port and do strobe.
+ * (2) watch BUSY# line for a while. If BUSY# is pulled
+ * down, the printer will be ready. Otherwise,
+ * it will be off-line (or not connected, or power-off,
+ * ...).
+ *
+ * The source of this procedure:
+ * Terumasa KODAKA, Kazufumi SHIMIZU, Yu HAYAMI:
+ * `PC-9801 Super Technique', Ascii, 1992.
+ */
+ int count;
+ unsigned long flags;
+
+ /* interrupts while check is fairly bad */
+ spin_lock_irqsave(&lp_old98_lock, flags);
+
+ if (!lp_old98_char(DC1)) {
+ spin_unlock_irqrestore(&lp_old98_lock, flags);
+ return -EBUSY;
+ }
+ count = (unsigned int)dc1_check > 10000 ? 10000 : dc1_check;
+ while (inb(LP_PORT_STATUS) & LP_MASK_nBUSY) {
+ if (--count == 0) {
+ spin_unlock_irqrestore(&lp_old98_lock, flags);
+ return -ENODEV;
+ }
+ }
+ spin_unlock_irqrestore(&lp_old98_lock, flags);
+ }
+
+ if ((lp.lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ lp.flags |= LP_BUSY;
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ saved_console_flags = lp_old98_console.flags;
+ lp_old98_console.flags &= ~CON_ENABLED;
+#endif
+ return 0;
+}
+
+static int lp_old98_release(struct inode * inode, struct file * file)
+{
+ kfree(lp.lp_buffer);
+ lp.lp_buffer = NULL;
+ lp.flags &= ~LP_BUSY;
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ lp_old98_console.flags = saved_console_flags;
+#endif
+ module_put(THIS_MODULE);
+ return 0;
+}
+
+static int lp_old98_init_device(void)
+{
+ unsigned char data;
+
+ if ((data = inb(LP_PORT_EXTMODE)) != 0xFF && (data & 0x10)) {
+ printk(KERN_INFO
+ "lp_old98: shutting down extended parallel port mode...\n");
+ outb(data & ~0x10, LP_PORT_EXTMODE);
+ }
+#ifdef PC98_HW_H98
+ if ((pc98_hw_flags & PC98_HW_H98)
+ && ((data = inb(LP_PORT_H98MODE)) & 0x01)) {
+ printk(KERN_INFO
+ "lp_old98: shutting down H98 full centronics mode...\n");
+ outb(data & ~0x01, LP_PORT_H98MODE);
+ }
+#endif
+ return 0;
+}
+
+static int lp_old98_ioctl(struct inode *inode, struct file *file,
+ unsigned int command, unsigned long arg)
+{
+ int retval = 0;
+
+ switch (command) {
+ case LPTIME:
+ lp.time = arg * HZ/100;
+ break;
+ case LPCHAR:
+ lp.chars = arg;
+ break;
+ case LPABORT:
+ if (arg)
+ lp.flags |= LP_ABORT;
+ else
+ lp.flags &= ~LP_ABORT;
+ break;
+ case LPABORTOPEN:
+ if (arg)
+ lp.flags |= LP_ABORTOPEN;
+ else
+ lp.flags &= ~LP_ABORTOPEN;
+ break;
+ case LPCAREFUL:
+ /* do nothing */
+ break;
+ case LPWAIT:
+ lp.wait = arg;
+ break;
+ case LPGETIRQ:
+ retval = put_user(0, (int *)arg);
+ break;
+ case LPGETSTATUS:
+ /*
+ * convert PC-9800's status to IBM PC's one, so that tunelp(8)
+ * works in the same way on this driver.
+ */
+ retval = put_user((inb(LP_PORT_STATUS) & LP_MASK_nBUSY)
+ ? (LP_PBUSY | LP_PERRORP) : LP_PERRORP,
+ (int *)arg);
+ break;
+ case LPRESET:
+ retval = lp_old98_init_device();
+ break;
+#ifdef LP_STATS
+ case LPGETSTATS:
+ if (copy_to_user((struct lp_stats *)arg, &lp.stats,
+ sizeof(struct lp_stats)))
+ retval = -EFAULT;
+ else if (suser())
+ memset(&lp.stats, 0, sizeof(struct lp_stats));
+ break;
+#endif
+ case LPGETFLAGS:
+ retval = put_user(lp.flags, (int *)arg);
+ break;
+ case LPSETIRQ:
+ default:
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+static struct file_operations lp_old98_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = NULL,
+ .write = lp_old98_write,
+ .ioctl = lp_old98_ioctl,
+ .open = lp_old98_open,
+ .release = lp_old98_release,
+};
+
+/*
+ * Support for console on lp_old98
+ */
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+
+static inline void io_delay(void)
+{
+ unsigned char dummy; /* actually not output */
+
+ asm volatile ("out%B0 %0,%1" : "=a"(dummy) : "N"(0x5f));
+}
+
+static void lp_old98_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ int i;
+ static unsigned int timeout_run = 0;
+
+ while (count) {
+ /* wait approx 1.2 seconds */
+ for (i = 2000000;
+ !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+ io_delay())
+ if (!--i) {
+ if (++timeout_run >= 10)
+ /* disable forever... */
+ console->flags &= ~CON_ENABLED;
+ return;
+ }
+
+ timeout_run = 0;
+
+ if (*s == '\n') {
+ outb('\r', LP_PORT_DATA);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ for (i = 1000000;
+ !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+ io_delay())
+ if (!--i)
+ return;
+ }
+
+ outb(*s++, LP_PORT_DATA);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+ outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+ io_delay();
+ io_delay();
+
+ --count;
+ }
+}
+
+static kdev_t lp_old98_console_device(struct console *console)
+{
+ return mk_kdev(LP_MAJOR, 0);
+}
+
+static struct console lp_old98_console = {
+ .name = "lp_old98",
+ .write = lp_old98_console_write,
+ .device = lp_old98_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+#endif /* console on lp_old98 */
+
+static int __init lp_old98_init(void)
+{
+#ifdef PC98_HW_H98
+ if (pc98_hw_flags & PC98_HW_H98)
+ if (!request_region(LP_PORT_H98MODE, 1, "lp_old98") {
+ printk(KERN_ERR
+ "lp_old98: I/O ports for H98 already occupied.\n");
+ return -EBUSY;
+ }
+#endif
+ if (request_region(LP_PORT_DATA, 1, "lp_old98")) {
+ if (request_region(LP_PORT_STATUS, 1, "lp_old98")) {
+ if (request_region(LP_PORT_STROBE, 1, "lp_old98")) {
+ if (request_region(LP_PORT_EXTMODE, 1, "lp_old98")) {
+ if (register_chrdev(LP_MAJOR, "lp", &lp_old98_fops)) {
+ printk(KERN_ERR
+ "lp_old98: unable to get major %d\n",
+ LP_MAJOR);
+ } else {
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ register_console(&lp_old98_console);
+ printk(KERN_INFO "lp_old98: console ready\n");
+#endif
+ /*
+ * rest are not needed by this driver,
+ * but for locking out other printer drivers...
+ */
+ lp_old98_init_device();
+ return 0;
+ }
+ }
+ release_region(LP_PORT_STROBE, 1);
+ }
+ release_region(LP_PORT_STATUS, 1);
+ }
+ release_region(LP_PORT_DATA, 1);
+ }
+#ifdef PC98_HW_H98
+ if (pc98_hw_flags & PC98_HW_H98)
+ release_region(LP_PORT_H98MODE, 1);
+#endif
+ printk(KERN_ERR "lp_old98: I/O ports already occupied, giving up.\n");
+ return -EBUSY;
+}
+
+static void __exit lp_old98_exit(void)
+{
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+ unregister_console(&lp_old98_console);
+#endif
+ unregister_chrdev(LP_MAJOR, "lp");
+
+ release_region(LP_PORT_DATA, 1);
+ release_region(LP_PORT_STATUS, 1);
+ release_region(LP_PORT_STROBE, 1);
+#ifdef PC98_HW_H98
+ if (pc98_hw_flags & PC98_HW_H98)
+ release_region(LP_PORT_H98MODE, 1);
+#endif
+ release_region(LP_PORT_EXTMODE, 1);
+}
+
+#ifndef MODULE
+static int __init lp_old98_setup(char *str)
+{
+ int ints[4];
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+ if (ints[0] > 0)
+ dc1_check = ints[1];
+ return 1;
+}
+__setup("lp_old98_dc1_check=", lp_old98_setup);
+#endif
+
+MODULE_PARM(dc1_check, "i");
+MODULE_AUTHOR("Kousuke Takai <tak@kmc.kyoto-u.ac.jp>");
+MODULE_DESCRIPTION("PC-9800 old printer port driver");
+MODULE_LICENSE("GPL");
+
+module_init(lp_old98_init);
+module_exit(lp_old98_exit);
diff -Nru linux-2.5.61/drivers/char/upd4990a.c linux98-2.5.61/drivers/char/upd4990a.c
--- linux-2.5.61/drivers/char/upd4990a.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/drivers/char/upd4990a.c 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,429 @@
+/*
+ * NEC PC-9800 Real Time Clock interface for Linux
+ *
+ * Copyright (C) 1997-2001 Linux/98 project,
+ * Kyoto University Microcomputer Club.
+ *
+ * Based on:
+ * drivers/char/rtc.c by Paul Gortmaker
+ *
+ * Changes:
+ * 2001-02-09 Call check_region on rtc_init and do not request I/O 0033h.
+ * Call del_timer and release_region on rtc_exit. -- tak
+ * 2001-07-14 Rewrite <linux/upd4990a.h> and split to <linux/upd4990a.h>
+ * and <asm-i386/upd4990a.h>.
+ * Introduce a lot of spin_lock/unlock (&rtc_lock).
+ */
+
+#define RTC98_VERSION "1.2"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/rtc.h>
+#include <linux/upd4990a.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#define BCD_TO_BINARY(val) (((val) >> 4) * 10 + ((val) & 0xF))
+#define BINARY_TO_BCD(val) ((((val) / 10) << 4) | ((val) % 10))
+
+/*
+ * We sponge a minor off of the misc major. No need slurping
+ * up another valuable major dev number for this. If you add
+ * an ioctl, make sure you don't conflict with SPARC's RTC
+ * ioctls.
+ */
+
+static struct fasync_struct *rtc_async_queue;
+
+static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
+
+static struct timer_list rtc_uie_timer;
+static u8 old_refclk;
+
+static int rtc_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+
+static int rtc_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+
+/*
+ * Bits in rtc_status. (5 bits of room for future expansion)
+ */
+
+#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
+#define RTC_TIMER_ON 0x02 /* not used */
+#define RTC_UIE_TIMER_ON 0x04 /* UIE emulation timer is active */
+
+/*
+ * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is
+ * protected by the big kernel lock. However, ioctl can still disable the timer
+ * in rtc_status and then with del_timer after the interrupt has read
+ * rtc_status but before mod_timer is called, which would then reenable the
+ * timer (but you would need to have an awful timing before you'd trip on it)
+ */
+static unsigned char rtc_status; /* bitmapped status byte. */
+static unsigned long rtc_irq_data; /* our output to the world */
+
+static const unsigned char days_in_mo[] =
+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+extern spinlock_t rtc_lock; /* defined in arch/i386/kernel/time.c */
+
+static void rtc_uie_intr(unsigned long data)
+{
+ u8 refclk, tmp;
+
+ /* Kernel timer does del_timer internally before calling
+ each timer entry, so this is unnecessary.
+ del_timer(&rtc_uie_timer); */
+ spin_lock(&rtc_lock);
+
+ /* Detect rising edge of 1Hz reference clock. */
+ refclk = UPD4990A_READ_DATA();
+ tmp = old_refclk & refclk;
+ old_refclk = ~refclk;
+ if (!(tmp & 1))
+ rtc_irq_data += 0x100;
+
+ spin_unlock(&rtc_lock);
+
+ if (!(tmp & 1)) {
+ /* Now do the rest of the actions */
+ wake_up_interruptible(&rtc_wait);
+ kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
+ }
+
+ rtc_uie_timer.expires = jiffies + 1;
+ add_timer(&rtc_uie_timer);
+}
+
+/*
+ * Now all the various file operations that we export.
+ */
+
+static ssize_t rtc_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long data;
+ ssize_t retval = 0;
+
+ if (count < sizeof(unsigned long))
+ return -EINVAL;
+
+ add_wait_queue(&rtc_wait, &wait);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ do {
+ /* First make it right. Then make it fast. Putting this whole
+ * block within the parentheses of a while would be too
+ * confusing. And no, xchg() is not the answer. */
+ spin_lock_irq(&rtc_lock);
+ data = rtc_irq_data;
+ rtc_irq_data = 0;
+ spin_unlock_irq(&rtc_lock);
+
+ if (data != 0)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+ schedule();
+ } while (1);
+
+ retval = put_user(data, (unsigned long *)buf);
+ if (!retval)
+ retval = sizeof(unsigned long);
+ out:
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&rtc_wait, &wait);
+
+ return retval;
+}
+
+static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct rtc_time wtime;
+ struct upd4990a_raw_data raw;
+
+ switch (cmd) {
+ case RTC_UIE_OFF: /* Mask ints from RTC updates. */
+ spin_lock_irq(&rtc_lock);
+ if (rtc_status & RTC_UIE_TIMER_ON) {
+ rtc_status &= ~RTC_UIE_TIMER_ON;
+ del_timer(&rtc_uie_timer);
+ }
+ spin_unlock_irq(&rtc_lock);
+ return 0;
+
+ case RTC_UIE_ON: /* Allow ints for RTC updates. */
+ spin_lock_irq(&rtc_lock);
+ rtc_irq_data = 0;
+ if (!(rtc_status & RTC_UIE_TIMER_ON)){
+ rtc_status |= RTC_UIE_TIMER_ON;
+ rtc_uie_timer.expires = jiffies + 1;
+ add_timer(&rtc_uie_timer);
+ }
+ /* Just in case... */
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+ old_refclk = ~UPD4990A_READ_DATA();
+ spin_unlock_irq(&rtc_lock);
+ return 0;
+
+ case RTC_RD_TIME: /* Read the time/date from RTC */
+ spin_lock_irq(&rtc_lock);
+ upd4990a_get_time(&raw, 0);
+ spin_unlock_irq(&rtc_lock);
+
+ wtime.tm_sec = BCD_TO_BINARY(raw.sec);
+ wtime.tm_min = BCD_TO_BINARY(raw.min);
+ wtime.tm_hour = BCD_TO_BINARY(raw.hour);
+ wtime.tm_mday = BCD_TO_BINARY(raw.mday);
+ wtime.tm_mon = raw.mon - 1; /* convert to 0-base */
+ wtime.tm_wday = raw.wday;
+
+ /*
+ * Account for differences between how the RTC uses the values
+ * and how they are defined in a struct rtc_time;
+ */
+ if ((wtime.tm_year = BCD_TO_BINARY(raw.year)) < 95)
+ wtime.tm_year += 100;
+
+ wtime.tm_isdst = 0;
+ break;
+
+ case RTC_SET_TIME: /* Set the RTC */
+ {
+ int leap_yr;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ if (copy_from_user(&wtime, (struct rtc_time *) arg,
+ sizeof (struct rtc_time)))
+ return -EFAULT;
+
+ /* Valid year is 1995 - 2094, inclusive. */
+ if (wtime.tm_year < 95 || wtime.tm_year > 194)
+ return -EINVAL;
+
+ if (wtime.tm_mon > 11 || wtime.tm_mday == 0)
+ return -EINVAL;
+
+ /* For acceptable year domain (1995 - 2094),
+ this IS sufficient. */
+ leap_yr = !(wtime.tm_year % 4);
+
+ if (wtime.tm_mday > (days_in_mo[wtime.tm_mon]
+ + (wtime.tm_mon == 2 && leap_yr)))
+ return -EINVAL;
+
+ if (wtime.tm_hour >= 24
+ || wtime.tm_min >= 60 || wtime.tm_sec >= 60)
+ return -EINVAL;
+
+ if (wtime.tm_wday > 6)
+ return -EINVAL;
+
+ raw.sec = BINARY_TO_BCD(wtime.tm_sec);
+ raw.min = BINARY_TO_BCD(wtime.tm_min);
+ raw.hour = BINARY_TO_BCD(wtime.tm_hour);
+ raw.mday = BINARY_TO_BCD(wtime.tm_mday);
+ raw.mon = wtime.tm_mon + 1;
+ raw.wday = wtime.tm_wday;
+ raw.year = BINARY_TO_BCD(wtime.tm_year % 100);
+
+ spin_lock_irq(&rtc_lock);
+ upd4990a_set_time(&raw, 0);
+ spin_unlock_irq(&rtc_lock);
+
+ return 0;
+ }
+ default:
+ return -EINVAL;
+ }
+ return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
+}
+
+/*
+ * We enforce only one user at a time here with the open/close.
+ * Also clear the previous interrupt data on an open, and clean
+ * up things on a close.
+ */
+
+static int rtc_open(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&rtc_lock);
+
+ if(rtc_status & RTC_IS_OPEN)
+ goto out_busy;
+
+ rtc_status |= RTC_IS_OPEN;
+
+ rtc_irq_data = 0;
+ spin_unlock_irq(&rtc_lock);
+ return 0;
+
+ out_busy:
+ spin_unlock_irq(&rtc_lock);
+ return -EBUSY;
+}
+
+static int rtc_fasync(int fd, struct file *filp, int on)
+{
+ return fasync_helper(fd, filp, on, &rtc_async_queue);
+}
+
+static int rtc_release(struct inode *inode, struct file *file)
+{
+ del_timer(&rtc_uie_timer);
+
+ if (file->f_flags & FASYNC)
+ rtc_fasync(-1, file, 0);
+
+ rtc_irq_data = 0;
+
+ /* No need for locking -- nobody else can do anything until this rmw is
+ * committed, and no timer is running. */
+ rtc_status &= ~(RTC_IS_OPEN | RTC_UIE_TIMER_ON);
+ return 0;
+}
+
+static unsigned int rtc_poll(struct file *file, poll_table *wait)
+{
+ unsigned long l;
+
+ poll_wait(file, &rtc_wait, wait);
+
+ spin_lock_irq(&rtc_lock);
+ l = rtc_irq_data;
+ spin_unlock_irq(&rtc_lock);
+
+ if (l != 0)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+/*
+ * The various file operations we support.
+ */
+
+static struct file_operations rtc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = rtc_read,
+ .poll = rtc_poll,
+ .ioctl = rtc_ioctl,
+ .open = rtc_open,
+ .release = rtc_release,
+ .fasync = rtc_fasync,
+};
+
+static struct miscdevice rtc_dev=
+{
+ RTC_MINOR,
+ "rtc",
+ &rtc_fops
+};
+
+static int __init rtc_init(void)
+{
+ if (!request_region(UPD4990A_IO, 1, "rtc")) {
+ printk(KERN_ERR "upd4990a: could not acquire I/O port %#x\n",
+ UPD4990A_IO);
+ return -EBUSY;
+ }
+
+#if 0
+ printk(KERN_INFO "\xB6\xDA\xDD\xC0\xDE \xC4\xDE\xB9\xB2 Driver\n"); /* Calender Clock Driver */
+#else
+ printk(KERN_INFO
+ "Real Time Clock driver for NEC PC-9800 v" RTC98_VERSION "\n");
+#endif
+ misc_register(&rtc_dev);
+ create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL);
+
+ init_timer(&rtc_uie_timer);
+ rtc_uie_timer.function = rtc_uie_intr;
+
+ return 0;
+}
+
+module_init (rtc_init);
+
+#ifdef MODULE
+static void __exit rtc_exit(void)
+{
+ del_timer(&rtc_uie_timer);
+ release_region(UPD4990A_IO, 1);
+ remove_proc_entry("driver/rtc", NULL);
+ misc_deregister(&rtc_dev);
+}
+
+module_exit (rtc_exit);
+#endif
+
+/*
+ * Info exported via "/proc/driver/rtc".
+ */
+
+static inline int rtc_get_status(char *buf)
+{
+ char *p;
+ unsigned int year;
+ struct upd4990a_raw_data data;
+
+ p = buf;
+
+ upd4990a_get_time(&data, 0);
+
+ /*
+ * There is no way to tell if the luser has the RTC set for local
+ * time or for Universal Standard Time (GMT). Probably local though.
+ */
+ if ((year = BCD_TO_BINARY(data.year) + 1900) < 1995)
+ year += 100;
+ p += sprintf(p,
+ "rtc_time\t: %02d:%02d:%02d\n"
+ "rtc_date\t: %04d-%02d-%02d\n",
+ BCD_TO_BINARY(data.hour), BCD_TO_BINARY(data.min),
+ BCD_TO_BINARY(data.sec),
+ year, data.mon, BCD_TO_BINARY(data.mday));
+
+ return p - buf;
+}
+
+static int rtc_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len = rtc_get_status(page);
+
+ if (len <= off + count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+}
diff -Nru linux-2.5.61/include/asm-i386/upd4990a.h linux98-2.5.61/include/asm-i386/upd4990a.h
--- linux-2.5.61/include/asm-i386/upd4990a.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/include/asm-i386/upd4990a.h 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,52 @@
+/*
+ * Architecture dependent definitions
+ * for NEC uPD4990A serial I/O real-time clock.
+ *
+ * Copyright 2001 TAKAI Kousuke <tak@kmc.kyoto-u.ac.jp>
+ * Kyoto University Microcomputer Club (KMC).
+ *
+ * References:
+ * uPD4990A serial I/O real-time clock users' manual (Japanese)
+ * No. S12828JJ4V0UM00 (4th revision), NEC Corporation, 1999.
+ */
+
+#ifndef _ASM_I386_uPD4990A_H
+#define _ASM_I386_uPD4990A_H
+
+#include <asm/io.h>
+
+#define UPD4990A_IO (0x0020)
+#define UPD4990A_IO_DATAOUT (0x0033)
+
+#define UPD4990A_OUTPUT_DATA_CLK(data, clk) \
+ outb((((data) & 1) << 5) | (((clk) & 1) << 4) \
+ | UPD4990A_PAR_SERIAL_MODE, UPD4990A_IO)
+
+#define UPD4990A_OUTPUT_CLK(clk) UPD4990A_OUTPUT_DATA_CLK(0, (clk))
+
+#define UPD4990A_OUTPUT_STROBE(stb) \
+ outb(((stb) << 3) | UPD4990A_PAR_SERIAL_MODE, UPD4990A_IO)
+
+/*
+ * Note: udelay() is *not* usable for UPD4990A_DELAY because
+ * the Linux kernel reads uPD4990A to set up system clock
+ * before calibrating delay...
+ */
+#define UPD4990A_DELAY(usec) \
+ do { \
+ if (__builtin_constant_p((usec)) && (usec) < 5) \
+ __asm__ (".rept %c1\n\toutb %%al,%0\n\t.endr" \
+ : : "N" (0x5F), \
+ "i" (((usec) * 10 + 5) / 6)); \
+ else { \
+ int _count = ((usec) * 10 + 5) / 6; \
+ __asm__ volatile ("1: outb %%al,%1\n\tloop 1b" \
+ : "=c" (_count) \
+ : "N" (0x5F), "0" (_count)); \
+ } \
+ } while (0)
+
+/* Caller should ignore all bits except bit0 */
+#define UPD4990A_READ_DATA() inb(UPD4990A_IO_DATAOUT)
+
+#endif
diff -Nru linux-2.5.61/include/linux/upd4990a.h linux98-2.5.61/include/linux/upd4990a.h
--- linux-2.5.61/include/linux/upd4990a.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/include/linux/upd4990a.h 2002-10-31 15:06:03.000000000 +0000
@@ -0,0 +1,140 @@
+/*
+ * Constant and architecture independent procedures
+ * for NEC uPD4990A serial I/O real-time clock.
+ *
+ * Copyright 2001 TAKAI Kousuke <tak@kmc.kyoto-u.ac.jp>
+ * Kyoto University Microcomputer Club (KMC).
+ *
+ * References:
+ * uPD4990A serial I/O real-time clock users' manual (Japanese)
+ * No. S12828JJ4V0UM00 (4th revision), NEC Corporation, 1999.
+ */
+
+#ifndef _LINUX_uPD4990A_H
+#define _LINUX_uPD4990A_H
+
+#include <asm/byteorder.h>
+
+#include <asm/upd4990a.h>
+
+/* Serial commands (4 bits) */
+#define UPD4990A_REGISTER_HOLD (0x0)
+#define UPD4990A_REGISTER_SHIFT (0x1)
+#define UPD4990A_TIME_SET_AND_COUNTER_HOLD (0x2)
+#define UPD4990A_TIME_READ (0x3)
+#define UPD4990A_TP_64HZ (0x4)
+#define UPD4990A_TP_256HZ (0x5)
+#define UPD4990A_TP_2048HZ (0x6)
+#define UPD4990A_TP_4096HZ (0x7)
+#define UPD4990A_TP_1S (0x8)
+#define UPD4990A_TP_10S (0x9)
+#define UPD4990A_TP_30S (0xA)
+#define UPD4990A_TP_60S (0xB)
+#define UPD4990A_INTERRUPT_RESET (0xC)
+#define UPD4990A_INTERRUPT_TIMER_START (0xD)
+#define UPD4990A_INTERRUPT_TIMER_STOP (0xE)
+#define UPD4990A_TEST_MODE_SET (0xF)
+
+/* Parallel commands (3 bits)
+ 0-6 are same with serial commands. */
+#define UPD4990A_PAR_SERIAL_MODE 7
+
+#ifndef UPD4990A_DELAY
+# include <linux/delay.h>
+# define UPD4990A_DELAY(usec) udelay((usec))
+#endif
+#ifndef UPD4990A_OUTPUT_DATA
+# define UPD4990A_OUTPUT_DATA(bit) \
+ do { \
+ UPD4990A_OUTPUT_DATA_CLK((bit), 0); \
+ UPD4990A_DELAY(1); /* t-DSU */ \
+ UPD4990A_OUTPUT_DATA_CLK((bit), 1); \
+ UPD4990A_DELAY(1); /* t-DHLD */ \
+ } while (0)
+#endif
+
+static __inline__ void upd4990a_serial_command(int command)
+{
+ UPD4990A_OUTPUT_DATA(command >> 0);
+ UPD4990A_OUTPUT_DATA(command >> 1);
+ UPD4990A_OUTPUT_DATA(command >> 2);
+ UPD4990A_OUTPUT_DATA(command >> 3);
+ UPD4990A_DELAY(1); /* t-HLD */
+ UPD4990A_OUTPUT_STROBE(1);
+ UPD4990A_DELAY(1); /* t-STB & t-d1 */
+ UPD4990A_OUTPUT_STROBE(0);
+ /* 19 microseconds extra delay is needed
+ iff previous mode is TIME READ command */
+}
+
+struct upd4990a_raw_data {
+ u8 sec; /* BCD */
+ u8 min; /* BCD */
+ u8 hour; /* BCD */
+ u8 mday; /* BCD */
+#if defined __LITTLE_ENDIAN_BITFIELD
+ unsigned wday :4; /* 0-6 */
+ unsigned mon :4; /* 1-based */
+#elif defined __BIG_ENDIAN_BITFIELD
+ unsigned mon :4; /* 1-based */
+ unsigned wday :4; /* 0-6 */
+#else
+# error Unknown bitfield endian!
+#endif
+ u8 year; /* BCD */
+};
+
+static __inline__ void upd4990a_get_time(struct upd4990a_raw_data *buf,
+ int leave_register_hold)
+{
+ int byte;
+
+ upd4990a_serial_command(UPD4990A_TIME_READ);
+ upd4990a_serial_command(UPD4990A_REGISTER_SHIFT);
+ UPD4990A_DELAY(19); /* t-d2 - t-d1 */
+
+ for (byte = 0; byte < 6; byte++) {
+ u8 tmp;
+ int bit;
+
+ for (tmp = 0, bit = 0; bit < 8; bit++) {
+ tmp = (tmp | (UPD4990A_READ_DATA() << 8)) >> 1;
+ UPD4990A_OUTPUT_CLK(1);
+ UPD4990A_DELAY(1);
+ UPD4990A_OUTPUT_CLK(0);
+ UPD4990A_DELAY(1);
+ }
+ ((u8 *) buf)[byte] = tmp;
+ }
+
+ /* The uPD4990A users' manual says that we should issue `Register
+ Hold' command after each data retrieval, or next `Time Read'
+ command may not work correctly. */
+ if (!leave_register_hold)
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+}
+
+static __inline__ void upd4990a_set_time(const struct upd4990a_raw_data *data,
+ int time_set_only)
+{
+ int byte;
+
+ if (!time_set_only)
+ upd4990a_serial_command(UPD4990A_REGISTER_SHIFT);
+
+ for (byte = 0; byte < 6; byte++) {
+ int bit;
+ u8 tmp = ((const u8 *) data)[byte];
+
+ for (bit = 0; bit < 8; bit++, tmp >>= 1)
+ UPD4990A_OUTPUT_DATA(tmp);
+ }
+
+ upd4990a_serial_command(UPD4990A_TIME_SET_AND_COUNTER_HOLD);
+
+ /* Release counter hold and start the clock. */
+ if (!time_set_only)
+ upd4990a_serial_command(UPD4990A_REGISTER_HOLD);
+}
+
+#endif /* _LINUX_uPD4990A_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.249 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site