[lkml]   [2003]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [2.5.61][SCSI][AIC7xxx] Problems with Tape driver
> While attempting to cpio extract data from the tape I got this in the logs. Is 
> this due to corrupt data on tape or the tape driver having a fit? ;-)
> We are the following SCSI card and tape drive:


> Problems below:
> ==========
> st0: Error with sense data: Info fld=0x4, Current stst0: sense = f0 4
> ASC=40 ASCQ=81

The sense code translate into:
Hardware Failure, Diagnostic failure: ASCQ = Component ID

In otherwords some component on the tape drive is failing diagnostics.
This is the likely cause of the other timeouts you reported.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:33    [W:0.035 / U:3.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site