Messages in this thread | | | Date | Sat, 15 Feb 2003 21:54:45 -0500 | From | John Weber <> | Subject | Linux 2.5 freezing after uncompressing linux |
| |
[1.] One line summary of the problem:
[Linux 2.5] Freezing after Uncompressing Linux
[2.] Full description of the problem/report:
The kernel freezes immediately after "Uncompressing Linux... OK". No further messages are displayed. I'm following wli's advice to add some printk's to check whether the system is even getting to startup_32(), but perhaps others have seen this problem.
[3.] Keywords (i.e., modules, networking, kernel):
kernel, boot
[4.] Kernel version (from /proc/version):
Linux version 2.5.61 (vir) (gcc version 3.2.3 20030210 (Debian prerelease))
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) [6.] A small shell script or example program which triggers the problem (if possible) [7.] Environment [7.1.] Software (add the output of the ver_linux script here) [7.2.] Processor information (from /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.00GHz stepping : 4 cpu MHz : 1999.794 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3984.58
[7.3.] Module information (from /proc/modules): [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 0cf8-0cff : PCI conf1 4000-40ff : PCI CardBus #03 4400-44ff : PCI CardBus #03 4800-48ff : PCI CardBus #04 4c00-4cff : PCI CardBus #04 7000-70ff : PCI device 10ec:8139 7000-70ff : 8139too 8000-801f : PCI device 8086:2442 8000-801f : usb-uhci 8060-807f : PCI device 8086:2444 8060-807f : usb-uhci a000-afff : PCI Bus #01 a000-a0ff : PCI device 1002:4c59 b000-b0ff : PCI device 8086:2445 b000-b0ff : Intel ICH2 b400-b43f : PCI device 8086:2445 b400-b43f : Intel ICH2 b800-b8ff : PCI device 8086:2446 bc00-bc7f : PCI device 8086:2446 bc90-bc9f : PCI device 8086:244b bc90-bc97 : ide0 bc98-bc9f : ide1 f300-f30f : PCI device 8086:2443
$ cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffdffff : System RAM 00100000-002c6069 : Kernel code 002c606a-0033d39f : Kernel data 0ffe0000-0fff7fff : ACPI Non-volatile Storage 10000000-10000fff : PCI device 104c:ac55 10001000-10001fff : PCI device 104c:ac55 10400000-107fffff : PCI CardBus #03 10800000-10bfffff : PCI CardBus #03 10c00000-10ffffff : PCI CardBus #04 11000000-113fffff : PCI CardBus #04 80100000-801007ff : PCI device 104c:8026 80100000-801007ff : ohci1394 80100800-801008ff : PCI device 10ec:8139 80100800-801008ff : 8139too 80104000-80107fff : PCI device 104c:8026 80500000-805fffff : PCI Bus #01 80500000-8050ffff : PCI device 1002:4c59 80500000-8050ffff : radeonfb 80600000-900fffff : PCI Bus #01 88000000-8fffffff : PCI device 1002:4c59 88000000-8fffffff : radeonfb e0000000-efffffff : PCI device 8086:1a30 ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04 ) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: 80500000-805fffff Prefetchable memory behind bridge: 80600000-900fffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 05) (prog-if 00 [N ormal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: 80100000-801fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) (prog-if 80 [Master ]) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at bc90 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) (prog-if 0 0 [UHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 8000 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at f300 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) (prog-if 0 0 [UHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 8060 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 05 ) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at b000 [size=256] Region 1: I/O ports at b400 [size=64]
00:1f.6 Modem: Intel Corp. Intel 537 [82801BA/BAM AC'97 Modem] (rev 05) (prog-if 00 [Generic]) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at b800 [size=256] Region 1: I/O ports at bc00 [size=128]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (p rog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]: Unknown device 101d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at a000 [size=256] Region 2: Memory at 80500000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 80520000 [disabled] [size=128K] Capabilities: <available only to root>
02:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Contro ller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at 80104000 (32-bit, non-prefetchable) [size=16K] Capabilities: <available only to root>
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 66 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 7000 [size=256] Region 1: Memory at 80100800 (32-bit, non-prefetchable) [size=256] Expansion ROM at 80120000 [disabled] [size=64K] Capabilities: <available only to root>
02:09.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (re v 01) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 168, cache line size 20 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=03, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
02:09.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (re v 01) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 168, cache line size 20 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=03, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
02:09.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (re v 01) Subsystem: Acer Incorporated [ALI]: Unknown device 1027 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 168, cache line size 20 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=04, subordinate=04, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
[7.6.] SCSI information (from /proc/scsi/scsi) [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds:
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |