lkml.org 
[lkml]   [2003]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.5.60-bk4] fix compile breakage on drivers/scsi/NCR53C9x.c

This fixes compile breakage due to recent changes to scsi.h



--- linux-2.5.60-bk4/drivers/scsi/NCR53C9x.c 2003-02-10 13:38:03.000000000 -0500
+++ linux-2.5.60-bk4-new/drivers/scsi/NCR53C9x.c 2003-02-14 16:03:57.000000000 -0500
@@ -356,7 +356,7 @@
Scsi_Cmnd *ptr, *prev;

for(ptr = *SC, prev = NULL;
- ptr && ((ptr->target != target) || (ptr->lun != lun));
+ ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
prev = ptr, ptr = (Scsi_Cmnd *) ptr->host_scribble)
;
if(ptr) {
@@ -946,7 +946,7 @@

static void esp_restore_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
- struct esp_pointers *ep = &esp->data_pointers[sp->target];
+ struct esp_pointers *ep = &esp->data_pointers[sp->device->id];

sp->SCp.ptr = ep->saved_ptr;
sp->SCp.buffer = ep->saved_buffer;
@@ -956,7 +956,7 @@

static void esp_save_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
- struct esp_pointers *ep = &esp->data_pointers[sp->target];
+ struct esp_pointers *ep = &esp->data_pointers[sp->device->id];

ep->saved_ptr = sp->SCp.ptr;
ep->saved_buffer = sp->SCp.buffer;
@@ -1037,8 +1037,8 @@

SDptr = SCptr->device;
esp_dev = SDptr->hostdata;
- lun = SCptr->lun;
- target = SCptr->target;
+ lun = SCptr->device->lun;
+ target = SCptr->device->id;

esp->snip = 0;
esp->msgout_len = 0;
@@ -1249,7 +1249,7 @@
SCpnt->scsi_done = done;
SCpnt->SCp.phase = not_issued;

- esp = (struct NCR_ESP *) SCpnt->host->hostdata;
+ esp = (struct NCR_ESP *) SCpnt->device->host->hostdata;

if(esp->dma_led_on)
esp->dma_led_on(esp);
@@ -1285,7 +1285,7 @@
int esp_command(Scsi_Cmnd *SCpnt)
{
#ifdef DEBUG_ESP
- struct NCR_ESP *esp = (struct NCR_ESP *) SCpnt->host->hostdata;
+ struct NCR_ESP *esp = (struct NCR_ESP *) SCpnt->device->host->hostdata;
#endif

ESPLOG(("esp%d: esp_command() called...\n", esp->esp_id));
@@ -1297,7 +1297,7 @@
{
ESPLOG(("[tgt<%02x> lun<%02x> "
"pphase<%s> cphase<%s>]",
- SCptr->target, SCptr->lun,
+ SCptr->device->id, SCptr->device->lun,
phase_string(SCptr->SCp.sent_command),
phase_string(SCptr->SCp.phase)));
}
@@ -1358,7 +1358,7 @@
/* Abort a command. The host_lock is acquired by caller. */
int esp_abort(Scsi_Cmnd *SCptr)
{
- struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->host->hostdata;
+ struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata;
struct ESP_regs *eregs = esp->eregs;
int don;

@@ -1486,7 +1486,7 @@
*/
int esp_reset(Scsi_Cmnd *SCptr)
{
- struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->host->hostdata;
+ struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata;

(void) esp_do_resetbus(esp, esp->eregs);

@@ -1716,13 +1716,13 @@
if(esp->prev_soff != esp_dev->sync_max_offset ||
esp->prev_stp != esp_dev->sync_min_period ||
(esp->erev > esp100a &&
- esp->prev_cfg3 != esp->config3[sp->target])) {
+ esp->prev_cfg3 != esp->config3[sp->device->id])) {
esp->prev_soff = esp_dev->sync_max_offset;
esp_write(eregs->esp_soff, esp->prev_soff);
esp->prev_stp = esp_dev->sync_min_period;
esp_write(eregs->esp_stp, esp->prev_stp);
if(esp->erev > esp100a) {
- esp->prev_cfg3 = esp->config3[sp->target];
+ esp->prev_cfg3 = esp->config3[sp->device->id];
esp_write(eregs->esp_cfg3, esp->prev_cfg3);
}
}
@@ -2117,7 +2117,7 @@
esp->esp_id,
SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual));
ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id,
- SCptr->target));
+ SCptr->device->id));
SCptr->device->borken = 1;
esp_dev->sync = 0;
bytes_sent = 0;
@@ -2225,7 +2225,7 @@

if(SCptr->SCp.Status != GOOD &&
SCptr->SCp.Status != CONDITION_GOOD &&
- ((1<<SCptr->target) & esp->targets_present) &&
+ ((1<<SCptr->device->id) & esp->targets_present) &&
esp_dev->sync && esp_dev->sync_max_offset) {
/* SCSI standard says that the synchronous capabilities
* should be renegotiated at this point. Most likely
@@ -2283,21 +2283,21 @@
sp = esp->issue_SC;
ESPLOG(("esp%d: issue_SC[", esp->esp_id));
while(sp) {
- ESPLOG(("<%02x,%02x>", sp->target, sp->lun));
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
sp = (Scsi_Cmnd *) sp->host_scribble;
}
ESPLOG(("]\n"));
sp = esp->current_SC;
ESPLOG(("esp%d: current_SC[", esp->esp_id));
while(sp) {
- ESPLOG(("<%02x,%02x>", sp->target, sp->lun));
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
sp = (Scsi_Cmnd *) sp->host_scribble;
}
ESPLOG(("]\n"));
sp = esp->disconnected_SC;
ESPLOG(("esp%d: disconnected_SC[", esp->esp_id));
while(sp) {
- ESPLOG(("<%02x,%02x>", sp->target, sp->lun));
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
sp = (Scsi_Cmnd *) sp->host_scribble;
}
ESPLOG(("]\n"));
@@ -2617,7 +2617,7 @@
*/
if(esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) {
/* target speaks... */
- esp->targets_present |= (1<<SCptr->target);
+ esp->targets_present |= (1<<SCptr->device->id);

/* What if the target ignores the sdtr? */
if(esp->snip)
@@ -2646,7 +2646,7 @@
* XXX for synchronous transfers.
*/
ESPLOG(("esp%d: STEP_ASEL for tgt %d\n",
- esp->esp_id, SCptr->target));
+ esp->esp_id, SCptr->device->id));

case ESP_STEP_SID:
/* Arbitration won, target selected, went
@@ -2763,14 +2763,14 @@
if(esp->disconnected_SC)
esp_cmd(esp, eregs, ESP_CMD_ESEL);

- if(((1<<SCptr->target) & esp->targets_present) &&
+ if(((1<<SCptr->device->id) & esp->targets_present) &&
esp->seqreg && esp->cur_msgout[0] == EXTENDED_MESSAGE &&
(SCptr->SCp.phase == in_slct_msg ||
SCptr->SCp.phase == in_slct_stop)) {
/* shit */
esp->snip = 0;
ESPLOG(("esp%d: Failed synchronous negotiation for target %d "
- "lun %d\n", esp->esp_id, SCptr->target, SCptr->lun));
+ "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
esp_dev->sync_max_offset = 0;
esp_dev->sync_min_period = 0;
esp_dev->sync = 1; /* so we don't negotiate again */
@@ -2796,9 +2796,9 @@
* or whenever when we are scanning the bus for targets.
* But first make sure that is really what is happening.
*/
- if(((1<<SCptr->target) & esp->targets_present)) {
+ if(((1<<SCptr->device->id) & esp->targets_present)) {
ESPLOG(("esp%d: Warning, live target %d not responding to "
- "selection.\n", esp->esp_id, SCptr->target));
+ "selection.\n", esp->esp_id, SCptr->device->id));

/* This _CAN_ happen. The SCSI standard states that
* the target is to _not_ respond to selection if
@@ -2892,7 +2892,7 @@

case NOP:
ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id,
- esp->current_SC->target));
+ esp->current_SC->device->id));
return 0;

case RESTORE_POINTERS:
@@ -2985,7 +2985,7 @@
* sibling call optimization. -DaveM
*/
ESPLOG((KERN_INFO "esp%d: target %d ",
- esp->esp_id, esp->current_SC->target));
+ esp->esp_id, esp->current_SC->device->id));
ESPLOG(("[period %dns offset %d %d.%02dMHz ",
(int) msg3 * 4, (int) msg4,
integer, fraction));
@@ -2993,7 +2993,7 @@
(((msg3 * 4) < 200) ? "-II" : "")));
} else {
ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n",
- esp->esp_id, esp->current_SC->target));
+ esp->esp_id, esp->current_SC->device->id));
}
}

@@ -3070,10 +3070,10 @@
else
bit = ESP_CONFIG3_FSCSI;
if(period < 50)
- esp->config3[SCptr->target] |= bit;
+ esp->config3[SCptr->device->id] |= bit;
else
- esp->config3[SCptr->target] &= ~bit;
- esp->prev_cfg3 = esp->config3[SCptr->target];
+ esp->config3[SCptr->device->id] &= ~bit;
+ esp->prev_cfg3 = esp->config3[SCptr->device->id];
esp_write(eregs->esp_cfg3, esp->prev_cfg3);
}
esp->prev_soff = esp_dev->sync_min_period;
@@ -3103,8 +3103,8 @@
bit = ESP_CONFIG3_FAST;
else
bit = ESP_CONFIG3_FSCSI;
- esp->config3[SCptr->target] &= ~bit;
- esp->prev_cfg3 = esp->config3[SCptr->target];
+ esp->config3[SCptr->device->id] &= ~bit;
+ esp->prev_cfg3 = esp->config3[SCptr->device->id];
esp_write(eregs->esp_cfg3, esp->prev_cfg3);
}
}
@@ -3493,7 +3493,7 @@
* a nexus is alive on the bus.
*/
ESPLOG(("esp%d: Forcing async and disabling disconnect for "
- "target %d\n", esp->esp_id, SCptr->target));
+ "target %d\n", esp->esp_id, SCptr->device->id));
SCptr->device->borken = 1; /* foo on you */
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.034 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site