Messages in this thread | | | From | "Jani Vaarala" <> | Subject | 2.6.0-test11, PCMCIA,, Cirrus CL 6729 bridge not working | Date | Tue, 09 Dec 2003 10:25:44 +0200 |
| |
I've been trying to get my PCMCIA bridge to work with 2.6.0-test11, but without any luck sofar. My bridge works perfectly with 2.4.X series kernels and pcmcia-cs-3.2.5 kernel modules (i82365, with module options: irq_mode=1 fast_pci=1).
It is a PCI-to-PCMCIA bridge based on Cirrus Logic CL 6729 (rev 07).
Is there a way to get it working under 2.6 series kernels ? (as pcmcia-cs is not going to be supported for 2.6 series kernels).
Some dumps from the session:
root@flamepygmy flame # modprobe yenta_socket root@flamepygmy flame # cardmgr cardmgr[3834]: no sockets found!
root@flamepygmy flame # modprobe i82092 root@flamepygmy flame # cardmgr cardmgr[3839]: no sockets found!
root@flamepygmy flame # modprobe tcic FATAL: Error inserting tcic (/lib/modules/2.6.0-test11/kernel/drivers/pcmcia/tcic.ko): No such device
root@flamepygmy flame # pcic_probe PCI bridge probe: Cirrus Logic CL 6729 found, 2 sockets.
root@flamepygmy flame # pcic_probe -m i82365
root@flamepygmy flame # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0e.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev 07) 00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 00:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4150 01:00.1 Display controller: ATI Technologies Inc: Unknown device 4170
root@flamepygmy flame # lspci -vvx
<clipped>
00:0e.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev 07) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at a400 [disabled] [size=4] 00: 13 10 00 11 80 00 00 04 07 00 05 06 00 00 00 00 10: 01 a4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
--jani; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |