Messages in this thread | | | Date | Sat, 6 Dec 2003 15:11:02 +0800 (WST) | Subject | Re: SMP broken on Dell PowerEdge 4100/200 under 2.6.0-testxx? | From | "Colin Coe" <> |
| |
/proc/cpuinfo and dmesg output is attached.
Thanks!
CC
-- "Obnoxious frog..." Spike, 2071AD
William Lee Irwin III said: > l?r, 06.12.2003 kl. 05.37 skrev William Lee Irwin III: >>> Yeah, it looks like it hit you too. >>> Could you boot with noirqbalance on the kernel commandline and see if >>> the problem goes away? > > On Sat, Dec 06, 2003 at 05:48:46AM +0100, Stian Jordet wrote: >> Wow, that actually fixed it :) >> CPU0 CPU1 >> 0: 65636 63667 IO-APIC-edge timer >> 1: 150 136 IO-APIC-edge i8042 >> 2: XT-PIC cascade >> 3: 2 1 IO-APIC-edge serial >> 8: 3 1 IO-APIC-edge rtc >> 9: IO-APIC-level acpi >> 14: 18 37 IO-APIC-edge ide0 > > Okay, irqbalance has gaffed (as predicted). Could you send in > /proc/cpuinfo and /var/log/dmesg? > > > -- wli > processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 1 model name : Pentium Pro stepping : 9 cpu MHz : 199.489 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov bogomips : 390.14
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 1 model name : Pentium Pro stepping : 9 cpu MHz : 199.489 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov bogomips : 397.31Linux version 2.6.0-test11 (root@host.domain.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #3 SMP Sat Dec 6 09:49:19 WST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000028000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 640MB LOWMEM available. found SMP MP-table at 000fdba0 hm, page 000fd000 reserved twice. hm, page 000fe000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 163840 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 159744 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: POWEREDGE APIC at: 0xFEE00000 Processor #3 6:1 APIC version 17 Processor #0 6:1 APIC version 17 I/O APIC #1 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: ro root=/dev/sdc1 noirqbalance Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 199.489 MHz processor. Console: colour VGA+ 80x25 Memory: 643948k/655360k available (2308k kernel code, 10636k reserved, 709k data, 456k init, 0k highmem) Calibrating delay loop... 390.14 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 82k freed CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium Pro stepping 09 per-CPU timeslice cutoff: 1460.32 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 397.31 BogoMIPS CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 CPU1: Intel Pentium Pro stepping 09 Total of 2 processors activated (787.45 BogoMIPS). ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 1-0 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #1 registers: 16. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 1 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 1 1 0 0 0 1 1 79 0b 001 01 1 1 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 1 1 0 0 0 1 1 99 0f 001 01 1 1 0 0 0 1 1 A1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 199.0394 MHz. ..... host bus clock speed is 66.0464 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 4 NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf814d, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fdb70 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x4ce5, dseg 0xf0000 pnp: 00:0f: ioport range 0x400-0x407 has been reserved pnp: 00:0f: ioport range 0x40a-0x40c has been reserved pnp: 00:0f: ioport range 0x410-0x43f has been reserved pnp: 00:0f: ioport range 0x461-0x462 has been reserved pnp: 00:0f: ioport range 0x464-0x465 has been reserved pnp: 00:0f: ioport range 0x481-0x48b has been reserved pnp: 00:0f: ioport range 0x4c6-0x4c6 has been reserved PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) matroxfb: Matrox Millennium II (PCI) detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x65536) matroxfb: framebuffer at 0xFB000000, mapped to 0xe8805000, size 4194304 fb0: MATROX frame buffer device fb0: initializing hardware ikconfig 0.7 with /proc/config* udf: registering filesystem Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found pty: 256 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:10.0: 3Com PCI 3c905C Tornado at 0xf400. Vers LK1.1.19 0000:00:13.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xf480. Vers LK1.1.19 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35 <Adaptec aic7860 Ultra SCSI adapter> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15) (scsi0:A:6): 5.000MB/s transfers (5.000MHz, offset 15) Vendor: NEC Model: CD-ROM DRIVE:462 Rev: 1.14 Type: CD-ROM ANSI SCSI revision: 02 Vendor: DEC Model: DLT2000 Rev: 971E Type: Sequential-Access ANSI SCSI revision: 02 megaraid: v2.00.3 (Release Date: Wed Feb 19 08:51:30 EST 2003) megaraid: found 0x101e:0x9010:bus 1:slot 13:func 0 scsi1:Found MegaRAID controller at 0xd090, IRQ:15 megaraid: [U.75:1.44] detected 4 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. scsi1 : LSI Logic MegaRAID U.75 254 commands 16 targs 5 chans 7 luns scsi1: scanning scsi channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 8568R Rev: U.75 Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD1 RAID1 4088R Rev: U.75 Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD2 RAID0 4088R Rev: U.75 Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD3 RAID0 4088R Rev: U.75 Type: Direct-Access ANSI SCSI revision: 02 scsi1: scanning scsi channel 4 [P0] for physical devices. Vendor: DELL Model: 6UW BACKPLANE Rev: 7 Type: Processor ANSI SCSI revision: 02 scsi1: scanning scsi channel 5 [P1] for physical devices. st: Version 20030811, fixed bufsize 32768, s/g segs 256 Attached scsi tape st0 at scsi0, channel 0, id 6, lun 0 st0: try direct i/o: yes, max page reachable by HBA 1048575 SCSI device sda: 17547264 512-byte hdwr sectors (8984 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sdb: 8372224 512-byte hdwr sectors (4287 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 SCSI device sdc: 8372224 512-byte hdwr sectors (4287 MB) sdc: asking for cache data failed sdc: assuming drive cache: write through sdc: sdc1 Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0 SCSI device sdd: 8372224 512-byte hdwr sectors (4287 MB) sdd: asking for cache data failed sdd: assuming drive cache: write through sdd: unknown partition table Attached scsi disk sdd at scsi1, channel 0, id 3, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0, type 5 Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 1 Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0 Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0 Attached scsi generic sg4 at scsi1, channel 0, id 2, lun 0, type 0 Attached scsi generic sg5 at scsi1, channel 0, id 3, lun 0, type 0 Attached scsi generic sg6 at scsi1, channel 4, id 6, lun 0, type 3 mice: PS/2 mouse device common for all mice input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 device-mapper: 1.0.6-ioctl (2002-10-15) initialised: dm@uk.sistina.com EISA: Probing bus 0 at 0000:00:0f.0 EISA: Mainboard DEL0058 detected. EISA: Detected 0 cards. Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: #0: Sound Fusion CS46xx at 0xfcffc000/0xfce00000, irq 14 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (5120 buckets, 40960 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 456k freed EXT3 FS on sdc1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kudzu: numerical sysctl 1 23 is obsolete. process `named' is using obsolete setsockopt SO_BSDCOMPAT | |