lkml.org 
[lkml]   [2003]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Catching NForce2 lockup with NMI watchdog - found?
From
Date
Craig Bradney wrote:
> All the interrupts are the same...except:
> 0, timer is now IO-APIC-edge.

Same here...

> Im not getting any NMI counts.. should I use nmi-watchdog=1?

I got nmi counts with nmi_watchdog=2... I never tested with =1... if
you get nmi's 1 lemme know.

> Ian, from looking back, you have an A7N8X-X bios 1007.
> Interesting that my USB hcis are still sharing IRQs there.

Your? i only see one... But you share it with sound and eth0...

> Any idea how I can get them apart, or if I should try.

You could always move eth0 to a different slot. Other than that, you can
do manual config for the irq's in the bios, but it shouldn't be
needed...

> My system was pretty stable as I've stated.. but the patch has changed
> things slightly re the timer.

As i stated in my prev email, i had to do 2 full greps at a sizable
amount of data to recreate the crash... =P

And, please CC since i'm not on this ml =P
--
Ian Kumlien <pomac@vapor.com>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.046 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site