Messages in this thread | | | Date | Wed, 31 Dec 2003 06:02:09 -0500 | Subject | [2.6.0-mm2] e100 driver hangs after period of moderate receive load | From | Lennert Buytenhek <> |
| |
Hi,
After banging on an e100 card for about ten minutes with a ~60kpps stream, the interface stops receiving packets. Interrupts come in once every few seconds (from /proc/interrupts), but no packets are received anymore at all. Lots of slab corruption messages in the syslog that were generated during that packet stream (see other email I sent.) Stopping the packet stream still leaves the interface unusable. 'ifconfig eth1 down ; ifconfig eth1 up' seems to fix things.
Clues?
thanks, Lennert - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |