lkml.org 
[lkml]   [2003]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: IDE-SCSI oops in 2.6.0-test11
    From
    Date
    Just as an fyi, Im on a 2600, same mobo (well, v2 1007 bios).. 2.6 test
    11, acpi on, local apic on, apic on.

    Can burn CDs and DVD+RWs without IDE-SCSI just fine.

    k3b 0.10.2
    cdrdao 1.1.8pre2
    cdtools 2.01 alpha 19

    Craig



    On Tue, 2003-12-02 at 13:40, ross.alexander@uk.neceur.com wrote:
    > CPU: Athlon-XP 2700+
    > MB: ASUS A7N8X Deluxe
    > Memory: 3 x 512MB
    > Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
    > nolapic,noapic
    > Libc: glibc-2.3.2 with linuxthreads.
    >
    > This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
    > writer
    > using cdrecord-dvdpro executable (no source available). This works fine
    > on linux-2.4.23.
    >
    > Dec 2 11:39:56 mig27 kernel: Linux version 2.6.0-test11 (root@mig27) (gcc
    > version 3.3.2) #9 Tue Dec 2 09:00:15 GMT 2003
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000000000 -
    > 000000000009fc00 (usable)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000000009fc00 -
    > 00000000000a0000 (reserved)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000000f0000 -
    > 0000000000100000 (reserved)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000100000 -
    > 000000005fff0000 (usable)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff0000 -
    > 000000005fff3000 (ACPI NVS)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff3000 -
    > 0000000060000000 (ACPI data)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fec00000 -
    > 00000000fec01000 (reserved)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fee00000 -
    > 00000000fee01000 (reserved)
    > Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000ffff0000 -
    > 0000000100000000 (reserved)
    > Dec 2 11:39:56 mig27 kernel: user: 0000000000000000 - 000000000009fc00
    > (usable)
    > Dec 2 11:39:57 mig27 kernel: user: 000000000009fc00 - 00000000000a0000
    > (reserved)
    > Dec 2 11:39:57 mig27 kernel: user: 00000000000f0000 - 0000000000100000
    > (reserved)
    > Dec 2 11:39:57 mig27 kernel: user: 0000000000100000 - 000000005fff0000
    > (usable)
    > Dec 2 11:39:57 mig27 kernel: On node 0 totalpages: 393200
    > Dec 2 11:39:57 mig27 kernel: DMA zone: 4096 pages, LIFO batch:1
    > Dec 2 11:39:57 mig27 kernel: Normal zone: 225280 pages, LIFO batch:16
    > Dec 2 11:39:57 mig27 kernel: HighMem zone: 163824 pages, LIFO batch:16
    > Dec 2 11:39:57 mig27 kernel: Building zonelist for node : 0
    > Dec 2 11:39:57 mig27 kernel: Kernel command line: root=/dev/hda1 vga=773
    > acpi=off nolapic noapic mem=1572800K
    > Dec 2 11:39:57 mig27 kernel: PID hash table entries: 4096 (order 12:
    > 32768 bytes)
    > Dec 2 11:39:57 mig27 kernel: Detected 2162.490 MHz processor.
    > Dec 2 11:39:57 mig27 kernel: Console: colour dummy device 80x25
    > Dec 2 11:39:57 mig27 kernel: Calibrating delay loop... 4276.22 BogoMIPS
    > Dec 2 11:39:57 mig27 kernel: Inode-cache hash table entries: 131072
    > (order: 7, 524288 bytes)
    > Dec 2 11:39:57 mig27 kernel: Mount-cache hash table entries: 512 (order:
    > 0, 4096 bytes)
    > Dec 2 11:39:57 mig27 kernel: CPU: AMD Athlon(tm) XP 2700+ stepping 01
    > Dec 2 11:39:57 mig27 kernel: POSIX conformance testing by UNIFIX
    > Dec 2 11:39:57 mig27 kernel: ACPI: ACPI tables contain no PCI IRQ routing
    > entries
    > Dec 2 11:39:57 mig27 kernel: PCI: Invalid ACPI-PCI IRQ routing table
    > Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware
    > Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware (bus 00)
    > Dec 2 11:39:57 mig27 kernel: highmem bounce pool size: 64 pages
    > Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
    > device 128x48
    > Dec 2 11:39:57 mig27 kernel: pty: 256 Unix98 ptys configured
    > Dec 2 11:39:57 mig27 kernel: hda: ST380021A, ATA DISK drive
    > Dec 2 11:39:57 mig27 kernel: hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM
    > drive
    > Dec 2 11:39:57 mig27 kernel: hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM
    > drive
    > Dec 2 11:39:57 mig27 kernel: Using anticipatory io scheduler
    > Dec 2 11:39:57 mig27 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    > Dec 2 11:39:57 mig27 kernel: ide1 at 0x170-0x177,0x376 on irq 15
    > Dec 2 11:39:57 mig27 kernel: hda: max request size: 128KiB
    > Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
    > device 128x48
    > Dec 2 11:39:57 mig27 kernel: VFS: Mounted root (ext2 filesystem)
    > readonly.
    > Dec 2 11:39:57 mig27 kernel: 3c59x: Donald Becker and others.
    > www.scyld.com/network/vortex.html
    > Dec 2 11:40:28 mig27 kernel: mtrr: 0xd0000000,0x4000000 overlaps existing
    > 0xd0000000,0x1000000
    > Dec 2 11:40:33 mig27 kernel: spurious 8259A interrupt: IRQ7.
    > Dec 2 11:42:56 mig27 kernel: hdc: ATAPI 52X CD-ROM drive, 128kB Cache
    > Dec 2 11:42:56 mig27 kernel: hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive,
    > 2048kB Cache
    > Dec 2 11:51:36 mig27 kernel: ide-scsi is deprecated for cd burning! Use
    > ide-cd and give dev=/dev/hdX as device
    > Dec 2 11:51:43 mig27 kernel: ahc_pci:1:10:0: Host Adapter Bios disabled.
    > Using default SCSI device parameters
    > Dec 2 11:51:43 mig27 kernel: <Adaptec 2902/04/10/15/20/30C SCSI
    > adapter>
    > Dec 2 11:51:43 mig27 kernel: aic7850: Single Channel A, SCSI
    > Id=7, 3/253 SCBs
    > Dec 2 11:51:43 mig27 kernel:
    > Dec 2 11:51:58 mig27 kernel: (scsi2:A:1): 10.000MB/s transfers
    > (10.000MHz, offset 15)
    > Dec 2 11:53:20 mig27 kernel: sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2
    > cdda tray
    > Dec 2 11:53:20 mig27 kernel: sr1: scsi3-mmc drive: 40x/40x writer cd/rw
    > xa/form2 cdda tray
    > Dec 2 11:53:20 mig27 kernel: sr2: scsi3-mmc drive: 16x/40x cd/rw xa/form2
    > cdda tray
    > Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer
    > dereference at virtual address 00000000
    > Dec 2 12:02:46 mig27 kernel: printing eip:
    > Dec 2 12:02:46 mig27 kernel: 00000000
    > Dec 2 12:02:46 mig27 kernel: *pde = 00000000
    > Dec 2 12:02:46 mig27 kernel: Oops: 0000 [#1]
    > Dec 2 12:02:46 mig27 kernel: CPU: 0
    > Dec 2 12:02:46 mig27 kernel: EIP: 0060:[<00000000>] Not tainted
    > Dec 2 12:02:46 mig27 kernel: EFLAGS: 00210202
    > Dec 2 12:02:46 mig27 kernel: EIP is at 0x0
    > Dec 2 12:02:46 mig27 kernel: eax: c0354f10 ebx: c035516c ecx:
    > 00000000 edx: 00000170
    > Dec 2 12:02:46 mig27 kernel: esi: f623e400 edi: f6ed4fc0 ebp:
    > e4161be0 esp: e4161bb8
    > Dec 2 12:02:46 mig27 kernel: ds: 007b es: 007b ss: 0068
    > Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369,
    > threadinfo=e4160000 task=f65d4100)
    > Dec 2 12:02:46 mig27 kernel: Stack: f9859b1b c035516c f623e400 0000000c
    > 00000000 0000001e f6ed4fc0 c035516c
    > Dec 2 12:02:46 mig27 kernel: 00000000 f6f9b240 e4161c0c c01ff25a
    > c035516c f623e400 00000000 00000000
    > Dec 2 12:02:46 mig27 kernel: 0000001e 0000000f f6f9b240 c035516c
    > c0354f10 e4161c38 c01ff570 c035516c
    > Dec 2 12:02:46 mig27 kernel: Call Trace:
    > Dec 2 12:02:46 mig27 kernel: [<f9859b1b>]
    > idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
    > Dec 2 12:02:46 mig27 kernel: [<c01ff25a>] start_request+0x16a/0x270
    > Dec 2 12:02:46 mig27 kernel: [<c01ff570>] ide_do_request+0x1e0/0x360
    > Dec 2 12:02:46 mig27 kernel: [<c01f3587>] __elv_add_request+0x27/0x40
    > Dec 2 12:02:46 mig27 kernel: [<c01ffd5e>] ide_do_drive_cmd+0xce/0x170
    > Dec 2 12:02:46 mig27 kernel: [<f985a36b>] idescsi_queue+0x1fb/0x630
    > [ide_scsi]
    > Dec 2 12:02:46 mig27 kernel: [<f993171f>]
    > scsi_init_cmd_from_req+0xcf/0x150 [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<f993159e>] scsi_dispatch_cmd+0x14e/0x200
    > [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<f99317a0>] scsi_done+0x0/0x70 [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<f9933ae0>] scsi_times_out+0x0/0x50
    > [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<f993631d>] scsi_request_fn+0x1cd/0x320
    > [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<c01f5b0c>] blk_insert_request+0x7c/0xd0
    > Dec 2 12:02:46 mig27 kernel: [<f9934ffb>]
    > scsi_insert_special_req+0x3b/0x40 [scsi_mod]
    > Dec 2 12:02:46 mig27 kernel: [<f98c3eb1>] sg_common_write+0x161/0x1d0
    > [sg]
    > Dec 2 12:02:46 mig27 kernel: [<f98c5290>] sg_cmd_done+0x0/0x280 [sg]
    > Dec 2 12:02:46 mig27 kernel: [<f98c3c73>] sg_new_write+0x1c3/0x2a0 [sg]
    > Dec 2 12:02:46 mig27 kernel: [<f98c4c09>] sg_ioctl+0xce9/0xf20 [sg]
    > Dec 2 12:02:46 mig27 kernel: [<c0204812>] pre_task_mulout_intr+0x82/0x90
    > Dec 2 12:02:46 mig27 kernel: [<c01afee4>] __delay+0x14/0x20
    > Dec 2 12:02:46 mig27 kernel: [<c02037fe>] do_rw_taskfile+0x12e/0x2b0
    > Dec 2 12:02:46 mig27 kernel: [<c01faff3>]
    > as_remove_queued_request+0x83/0x120
    > Dec 2 12:02:46 mig27 kernel: [<c020a194>] lba_28_rw_disk+0xa4/0xb0
    > Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
    > Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
    > Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
    > Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
    > Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
    > Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
    > Dec 2 12:02:46 mig27 kernel: [<c011cbf0>] default_wake_function+0x0/0x20
    > Dec 2 12:02:46 mig27 kernel: [<c01103ea>] do_gettimeofday+0x2a/0xc0
    > Dec 2 12:02:46 mig27 kernel: [<c01666d4>] sys_ioctl+0xf4/0x2a0
    > Dec 2 12:02:46 mig27 kernel: [<c010a36f>] syscall_call+0x7/0xb
    > Dec 2 12:02:46 mig27 kernel:
    > Dec 2 12:02:46 mig27 kernel: Code: Bad EIP value.
    >
    > #
    > # Automatically generated make config: don't edit
    > #
    > CONFIG_X86=y
    > CONFIG_MMU=y
    > CONFIG_UID16=y
    > CONFIG_GENERIC_ISA_DMA=y
    >
    > #
    > # Code maturity level options
    > #
    > CONFIG_EXPERIMENTAL=y
    > CONFIG_CLEAN_COMPILE=y
    > CONFIG_STANDALONE=y
    > CONFIG_BROKEN_ON_SMP=y
    >
    > #
    > # General setup
    > #
    > CONFIG_SWAP=y
    > CONFIG_SYSVIPC=y
    > # CONFIG_BSD_PROCESS_ACCT is not set
    > CONFIG_SYSCTL=y
    > CONFIG_LOG_BUF_SHIFT=14
    > CONFIG_IKCONFIG=y
    > CONFIG_IKCONFIG_PROC=y
    > # CONFIG_EMBEDDED is not set
    > CONFIG_KALLSYMS=y
    > CONFIG_FUTEX=y
    > CONFIG_EPOLL=y
    > CONFIG_IOSCHED_NOOP=y
    > CONFIG_IOSCHED_AS=y
    > CONFIG_IOSCHED_DEADLINE=y
    >
    > #
    > # Loadable module support
    > #
    > CONFIG_MODULES=y
    > CONFIG_MODULE_UNLOAD=y
    > # CONFIG_MODULE_FORCE_UNLOAD is not set
    > CONFIG_OBSOLETE_MODPARM=y
    > # CONFIG_MODVERSIONS is not set
    > CONFIG_KMOD=y
    >
    > #
    > # Processor type and features
    > #
    > CONFIG_X86_PC=y
    > # CONFIG_X86_VOYAGER is not set
    > # CONFIG_X86_NUMAQ is not set
    > # CONFIG_X86_SUMMIT is not set
    > # CONFIG_X86_BIGSMP is not set
    > # CONFIG_X86_VISWS is not set
    > # CONFIG_X86_GENERICARCH is not set
    > # CONFIG_X86_ES7000 is not set
    > # CONFIG_M386 is not set
    > # CONFIG_M486 is not set
    > # CONFIG_M586 is not set
    > # CONFIG_M586TSC is not set
    > # CONFIG_M586MMX is not set
    > # CONFIG_M686 is not set
    > # CONFIG_MPENTIUMII is not set
    > # CONFIG_MPENTIUMIII is not set
    > # CONFIG_MPENTIUM4 is not set
    > # CONFIG_MK6 is not set
    > CONFIG_MK7=y
    > # CONFIG_MK8 is not set
    > # CONFIG_MELAN is not set
    > # CONFIG_MCRUSOE is not set
    > # CONFIG_MWINCHIPC6 is not set
    > # CONFIG_MWINCHIP2 is not set
    > # CONFIG_MWINCHIP3D is not set
    > # CONFIG_MCYRIXIII is not set
    > # CONFIG_MVIAC3_2 is not set
    > # CONFIG_X86_GENERIC is not set
    > CONFIG_X86_CMPXCHG=y
    > CONFIG_X86_XADD=y
    > CONFIG_X86_L1_CACHE_SHIFT=6
    > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    > CONFIG_X86_WP_WORKS_OK=y
    > CONFIG_X86_INVLPG=y
    > CONFIG_X86_BSWAP=y
    > CONFIG_X86_POPAD_OK=y
    > CONFIG_X86_GOOD_APIC=y
    > CONFIG_X86_INTEL_USERCOPY=y
    > CONFIG_X86_USE_PPRO_CHECKSUM=y
    > CONFIG_X86_USE_3DNOW=y
    > # CONFIG_HPET_TIMER is not set
    > # CONFIG_HPET_EMULATE_RTC is not set
    > # CONFIG_SMP is not set
    > CONFIG_PREEMPT=y
    > CONFIG_X86_UP_APIC=y
    > CONFIG_X86_UP_IOAPIC=y
    > CONFIG_X86_LOCAL_APIC=y
    > CONFIG_X86_IO_APIC=y
    > CONFIG_X86_TSC=y
    > CONFIG_X86_MCE=y
    > CONFIG_X86_MCE_NONFATAL=y
    > CONFIG_X86_MCE_P4THERMAL=y
    > # CONFIG_TOSHIBA is not set
    > # CONFIG_I8K is not set
    > # CONFIG_MICROCODE is not set
    > # CONFIG_X86_MSR is not set
    > # CONFIG_X86_CPUID is not set
    > # CONFIG_EDD is not set
    > # CONFIG_NOHIGHMEM is not set
    > CONFIG_HIGHMEM4G=y
    > # CONFIG_HIGHMEM64G is not set
    > CONFIG_HIGHMEM=y
    > # CONFIG_HIGHPTE is not set
    > # CONFIG_MATH_EMULATION is not set
    > CONFIG_MTRR=y
    > CONFIG_HAVE_DEC_LOCK=y
    >
    > #
    > # Power management options (ACPI, APM)
    > #
    > CONFIG_PM=y
    > # CONFIG_SOFTWARE_SUSPEND is not set
    > # CONFIG_PM_DISK is not set
    >
    > #
    > # ACPI (Advanced Configuration and Power Interface) Support
    > #
    > CONFIG_ACPI=y
    > CONFIG_ACPI_BOOT=y
    > CONFIG_ACPI_INTERPRETER=y
    > CONFIG_ACPI_SLEEP=y
    > CONFIG_ACPI_SLEEP_PROC_FS=y
    > CONFIG_ACPI_AC=y
    > CONFIG_ACPI_BATTERY=y
    > CONFIG_ACPI_BUTTON=y
    > CONFIG_ACPI_FAN=y
    > CONFIG_ACPI_PROCESSOR=y
    > CONFIG_ACPI_THERMAL=y
    > # CONFIG_ACPI_ASUS is not set
    > # CONFIG_ACPI_TOSHIBA is not set
    > # CONFIG_ACPI_DEBUG is not set
    > CONFIG_ACPI_BUS=y
    > CONFIG_ACPI_EC=y
    > CONFIG_ACPI_POWER=y
    > CONFIG_ACPI_PCI=y
    > CONFIG_ACPI_SYSTEM=y
    > # CONFIG_ACPI_RELAXED_AML is not set
    >
    > #
    > # APM (Advanced Power Management) BIOS Support
    > #
    > # CONFIG_APM is not set
    >
    > #
    > # CPU Frequency scaling
    > #
    > # CONFIG_CPU_FREQ is not set
    >
    > #
    > # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    > #
    > CONFIG_PCI=y
    > # CONFIG_PCI_GOBIOS is not set
    > # CONFIG_PCI_GODIRECT is not set
    > CONFIG_PCI_GOANY=y
    > CONFIG_PCI_BIOS=y
    > CONFIG_PCI_DIRECT=y
    > CONFIG_PCI_LEGACY_PROC=y
    > CONFIG_PCI_NAMES=y
    > CONFIG_ISA=y
    > # CONFIG_EISA is not set
    > # CONFIG_MCA is not set
    > # CONFIG_SCx200 is not set
    > CONFIG_HOTPLUG=y
    >
    > #
    > # PCMCIA/CardBus support
    > #
    > # CONFIG_PCMCIA is not set
    > CONFIG_PCMCIA_PROBE=y
    >
    > #
    > # PCI Hotplug Support
    > #
    > # CONFIG_HOTPLUG_PCI is not set
    >
    > #
    > # Executable file formats
    > #
    > CONFIG_BINFMT_ELF=y
    > # CONFIG_BINFMT_AOUT is not set
    > # CONFIG_BINFMT_MISC is not set
    >
    > #
    > # Device Drivers
    > #
    >
    > #
    > # Generic Driver Options
    > #
    > # CONFIG_FW_LOADER is not set
    >
    > #
    > # Memory Technology Devices (MTD)
    > #
    > # CONFIG_MTD is not set
    >
    > #
    > # Parallel port support
    > #
    > # CONFIG_PARPORT is not set
    >
    > #
    > # Plug and Play support
    > #
    > CONFIG_PNP=y
    > # CONFIG_PNP_DEBUG is not set
    >
    > #
    > # Protocols
    > #
    > # CONFIG_ISAPNP is not set
    > # CONFIG_PNPBIOS is not set
    >
    > #
    > # Block devices
    > #
    > CONFIG_BLK_DEV_FD=m
    > # CONFIG_BLK_DEV_XD is not set
    > # CONFIG_BLK_CPQ_DA is not set
    > # CONFIG_BLK_CPQ_CISS_DA is not set
    > # CONFIG_BLK_DEV_DAC960 is not set
    > # CONFIG_BLK_DEV_UMEM is not set
    > CONFIG_BLK_DEV_LOOP=m
    > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    > # CONFIG_BLK_DEV_NBD is not set
    > # CONFIG_BLK_DEV_RAM is not set
    > # CONFIG_BLK_DEV_INITRD is not set
    > CONFIG_LBD=y
    >
    > #
    > # ATA/ATAPI/MFM/RLL support
    > #
    > CONFIG_IDE=y
    > CONFIG_BLK_DEV_IDE=y
    >
    > #
    > # Please see Documentation/ide.txt for help/info on IDE drives
    > #
    > # CONFIG_BLK_DEV_HD_IDE is not set
    > CONFIG_BLK_DEV_IDEDISK=y
    > CONFIG_IDEDISK_MULTI_MODE=y
    > # CONFIG_IDEDISK_STROKE is not set
    > CONFIG_BLK_DEV_IDECD=m
    > # CONFIG_BLK_DEV_IDETAPE is not set
    > CONFIG_BLK_DEV_IDEFLOPPY=m
    > CONFIG_BLK_DEV_IDESCSI=m
    > # CONFIG_IDE_TASK_IOCTL is not set
    > CONFIG_IDE_TASKFILE_IO=y
    >
    > #
    > # IDE chipset support/bugfixes
    > #
    > # CONFIG_BLK_DEV_CMD640 is not set
    > # CONFIG_BLK_DEV_IDEPNP is not set
    > CONFIG_BLK_DEV_IDEPCI=y
    > CONFIG_IDEPCI_SHARE_IRQ=y
    > # CONFIG_BLK_DEV_OFFBOARD is not set
    > CONFIG_BLK_DEV_GENERIC=y
    > # CONFIG_BLK_DEV_OPTI621 is not set
    > # CONFIG_BLK_DEV_RZ1000 is not set
    > CONFIG_BLK_DEV_IDEDMA_PCI=y
    > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    > CONFIG_IDEDMA_PCI_AUTO=y
    > # CONFIG_IDEDMA_ONLYDISK is not set
    > # CONFIG_IDEDMA_PCI_WIP is not set
    > CONFIG_BLK_DEV_ADMA=y
    > # CONFIG_BLK_DEV_AEC62XX is not set
    > # CONFIG_BLK_DEV_ALI15X3 is not set
    > # CONFIG_BLK_DEV_AMD74XX is not set
    > # CONFIG_BLK_DEV_CMD64X is not set
    > # CONFIG_BLK_DEV_TRIFLEX is not set
    > # CONFIG_BLK_DEV_CY82C693 is not set
    > # CONFIG_BLK_DEV_CS5520 is not set
    > # CONFIG_BLK_DEV_CS5530 is not set
    > # CONFIG_BLK_DEV_HPT34X is not set
    > # CONFIG_BLK_DEV_HPT366 is not set
    > # CONFIG_BLK_DEV_SC1200 is not set
    > # CONFIG_BLK_DEV_PIIX is not set
    > # CONFIG_BLK_DEV_NS87415 is not set
    > # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    > # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    > # CONFIG_BLK_DEV_SVWKS is not set
    > # CONFIG_BLK_DEV_SIIMAGE is not set
    > # CONFIG_BLK_DEV_SIS5513 is not set
    > # CONFIG_BLK_DEV_SLC90E66 is not set
    > # CONFIG_BLK_DEV_TRM290 is not set
    > # CONFIG_BLK_DEV_VIA82CXXX is not set
    > # CONFIG_IDE_CHIPSETS is not set
    > CONFIG_BLK_DEV_IDEDMA=y
    > # CONFIG_IDEDMA_IVB is not set
    > CONFIG_IDEDMA_AUTO=y
    > # CONFIG_DMA_NONPCI is not set
    > # CONFIG_BLK_DEV_HD is not set
    >
    > #
    > # SCSI device support
    > #
    > CONFIG_SCSI=m
    > CONFIG_SCSI_PROC_FS=y
    >
    > #
    > # SCSI support type (disk, tape, CD-ROM)
    > #
    > CONFIG_BLK_DEV_SD=m
    > CONFIG_CHR_DEV_ST=m
    > # CONFIG_CHR_DEV_OSST is not set
    > CONFIG_BLK_DEV_SR=m
    > # CONFIG_BLK_DEV_SR_VENDOR is not set
    > CONFIG_CHR_DEV_SG=m
    >
    > #
    > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    > #
    > # CONFIG_SCSI_MULTI_LUN is not set
    > CONFIG_SCSI_REPORT_LUNS=y
    > # CONFIG_SCSI_CONSTANTS is not set
    > # CONFIG_SCSI_LOGGING is not set
    >
    > #
    > # SCSI low-level drivers
    > #
    > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    > # CONFIG_SCSI_7000FASST is not set
    > # CONFIG_SCSI_ACARD is not set
    > # CONFIG_SCSI_AHA152X is not set
    > # CONFIG_SCSI_AHA1542 is not set
    > # CONFIG_SCSI_AACRAID is not set
    > CONFIG_SCSI_AIC7XXX=m
    > CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    > CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    > # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
    > # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
    > CONFIG_AIC7XXX_DEBUG_ENABLE=y
    > CONFIG_AIC7XXX_DEBUG_MASK=0
    > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    > # CONFIG_SCSI_AIC7XXX_OLD is not set
    > # CONFIG_SCSI_AIC79XX is not set
    > # CONFIG_SCSI_ADVANSYS is not set
    > # CONFIG_SCSI_IN2000 is not set
    > # CONFIG_SCSI_MEGARAID is not set
    > # CONFIG_SCSI_SATA is not set
    > # CONFIG_SCSI_BUSLOGIC is not set
    > # CONFIG_SCSI_CPQFCTS is not set
    > # CONFIG_SCSI_DMX3191D is not set
    > # CONFIG_SCSI_DTC3280 is not set
    > # CONFIG_SCSI_EATA is not set
    > # CONFIG_SCSI_EATA_PIO is not set
    > # CONFIG_SCSI_FUTURE_DOMAIN is not set
    > # CONFIG_SCSI_GDTH is not set
    > # CONFIG_SCSI_GENERIC_NCR5380 is not set
    > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    > # CONFIG_SCSI_IPS is not set
    > # CONFIG_SCSI_INIA100 is not set
    > # CONFIG_SCSI_NCR53C406A is not set
    > # CONFIG_SCSI_SYM53C8XX_2 is not set
    > # CONFIG_SCSI_PAS16 is not set
    > # CONFIG_SCSI_PSI240I is not set
    > # CONFIG_SCSI_QLOGIC_FAS is not set
    > # CONFIG_SCSI_QLOGIC_ISP is not set
    > # CONFIG_SCSI_QLOGIC_FC is not set
    > # CONFIG_SCSI_QLOGIC_1280 is not set
    > # CONFIG_SCSI_SYM53C416 is not set
    > # CONFIG_SCSI_DC395x is not set
    > # CONFIG_SCSI_T128 is not set
    > # CONFIG_SCSI_U14_34F is not set
    > # CONFIG_SCSI_ULTRASTOR is not set
    > # CONFIG_SCSI_NSP32 is not set
    > # CONFIG_SCSI_DEBUG is not set
    >
    > #
    > # Old CD-ROM drivers (not SCSI, not IDE)
    > #
    > # CONFIG_CD_NO_IDESCSI is not set
    >
    > #
    > # Multi-device support (RAID and LVM)
    > #
    > CONFIG_MD=y
    > # CONFIG_BLK_DEV_MD is not set
    > CONFIG_BLK_DEV_DM=m
    > CONFIG_DM_IOCTL_V4=y
    >
    > #
    > # Fusion MPT device support
    > #
    > # CONFIG_FUSION is not set
    >
    > #
    > # IEEE 1394 (FireWire) support (EXPERIMENTAL)
    > #
    > CONFIG_IEEE1394=m
    >
    > #
    > # Subsystem Options
    > #
    > # CONFIG_IEEE1394_VERBOSEDEBUG is not set
    > # CONFIG_IEEE1394_OUI_DB is not set
    >
    > #
    > # Device Drivers
    > #
    >
    > #
    > # Texas Instruments PCILynx requires I2C bit-banging
    > #
    > CONFIG_IEEE1394_OHCI1394=m
    >
    > #
    > # Protocol Drivers
    > #
    > # CONFIG_IEEE1394_VIDEO1394 is not set
    > # CONFIG_IEEE1394_SBP2 is not set
    > # CONFIG_IEEE1394_ETH1394 is not set
    > # CONFIG_IEEE1394_DV1394 is not set
    > # CONFIG_IEEE1394_RAWIO is not set
    > # CONFIG_IEEE1394_CMP is not set
    >
    > #
    > # I2O device support
    > #
    > # CONFIG_I2O is not set
    >
    > #
    > # Networking support
    > #
    > CONFIG_NET=y
    >
    > #
    > # Networking options
    > #
    > CONFIG_PACKET=y
    > # CONFIG_PACKET_MMAP is not set
    > # CONFIG_NETLINK_DEV is not set
    > CONFIG_UNIX=y
    > # CONFIG_NET_KEY is not set
    > CONFIG_INET=y
    > CONFIG_IP_MULTICAST=y
    > # CONFIG_IP_ADVANCED_ROUTER is not set
    > # CONFIG_IP_PNP is not set
    > # CONFIG_NET_IPIP is not set
    > # CONFIG_NET_IPGRE is not set
    > # CONFIG_IP_MROUTE is not set
    > # CONFIG_ARPD is not set
    > # CONFIG_INET_ECN is not set
    > # CONFIG_SYN_COOKIES is not set
    > # CONFIG_INET_AH is not set
    > # CONFIG_INET_ESP is not set
    > # CONFIG_INET_IPCOMP is not set
    > CONFIG_IPV6=m
    > # CONFIG_IPV6_PRIVACY is not set
    > # CONFIG_INET6_AH is not set
    > # CONFIG_INET6_ESP is not set
    > # CONFIG_INET6_IPCOMP is not set
    > # CONFIG_IPV6_TUNNEL is not set
    > # CONFIG_DECNET is not set
    > # CONFIG_BRIDGE is not set
    > # CONFIG_NETFILTER is not set
    >
    > #
    > # SCTP Configuration (EXPERIMENTAL)
    > #
    > CONFIG_IPV6_SCTP__=m
    > # CONFIG_IP_SCTP is not set
    > # CONFIG_ATM is not set
    > # CONFIG_VLAN_8021Q is not set
    > # CONFIG_LLC2 is not set
    > # CONFIG_IPX is not set
    > # CONFIG_ATALK is not set
    > # CONFIG_X25 is not set
    > # CONFIG_LAPB is not set
    > # CONFIG_NET_DIVERT is not set
    > # CONFIG_ECONET is not set
    > # CONFIG_WAN_ROUTER is not set
    > # CONFIG_NET_FASTROUTE is not set
    > # CONFIG_NET_HW_FLOWCONTROL is not set
    >
    > #
    > # QoS and/or fair queueing
    > #
    > # CONFIG_NET_SCHED is not set
    >
    > #
    > # Network testing
    > #
    > # CONFIG_NET_PKTGEN is not set
    > CONFIG_NETDEVICES=y
    >
    > #
    > # ARCnet devices
    > #
    > # CONFIG_ARCNET is not set
    > CONFIG_DUMMY=m
    > # CONFIG_BONDING is not set
    > # CONFIG_EQUALIZER is not set
    > # CONFIG_TUN is not set
    > # CONFIG_NET_SB1000 is not set
    >
    > #
    > # Ethernet (10 or 100Mbit)
    > #
    > CONFIG_NET_ETHERNET=y
    > # CONFIG_MII is not set
    > # CONFIG_HAPPYMEAL is not set
    > # CONFIG_SUNGEM is not set
    > CONFIG_NET_VENDOR_3COM=y
    > # CONFIG_EL1 is not set
    > # CONFIG_EL2 is not set
    > # CONFIG_ELPLUS is not set
    > # CONFIG_EL16 is not set
    > # CONFIG_EL3 is not set
    > # CONFIG_3C515 is not set
    > CONFIG_VORTEX=m
    > # CONFIG_TYPHOON is not set
    > # CONFIG_LANCE is not set
    > # CONFIG_NET_VENDOR_SMC is not set
    > # CONFIG_NET_VENDOR_RACAL is not set
    >
    > #
    > # Tulip family network device support
    > #
    > CONFIG_NET_TULIP=y
    > # CONFIG_DE2104X is not set
    > CONFIG_TULIP=m
    > # CONFIG_TULIP_MWI is not set
    > # CONFIG_TULIP_MMIO is not set
    > # CONFIG_DE4X5 is not set
    > # CONFIG_WINBOND_840 is not set
    > # CONFIG_DM9102 is not set
    > # CONFIG_AT1700 is not set
    > # CONFIG_DEPCA is not set
    > # CONFIG_HP100 is not set
    > # CONFIG_NET_ISA is not set
    > # CONFIG_NET_PCI is not set
    > # CONFIG_NET_POCKET is not set
    >
    > #
    > # Ethernet (1000 Mbit)
    > #
    > # CONFIG_ACENIC is not set
    > # CONFIG_DL2K is not set
    > # CONFIG_E1000 is not set
    > # CONFIG_NS83820 is not set
    > # CONFIG_HAMACHI is not set
    > # CONFIG_YELLOWFIN is not set
    > # CONFIG_R8169 is not set
    > # CONFIG_SIS190 is not set
    > # CONFIG_SK98LIN is not set
    > # CONFIG_TIGON3 is not set
    >
    > #
    > # Ethernet (10000 Mbit)
    > #
    > # CONFIG_IXGB is not set
    > # CONFIG_FDDI is not set
    > # CONFIG_HIPPI is not set
    > # CONFIG_PPP is not set
    > # CONFIG_SLIP is not set
    >
    > #
    > # Wireless LAN (non-hamradio)
    > #
    > # CONFIG_NET_RADIO is not set
    >
    > #
    > # Token Ring devices
    > #
    > # CONFIG_TR is not set
    > # CONFIG_NET_FC is not set
    > # CONFIG_RCPCI is not set
    > # CONFIG_SHAPER is not set
    >
    > #
    > # Wan interfaces
    > #
    > # CONFIG_WAN is not set
    >
    > #
    > # Amateur Radio support
    > #
    > # CONFIG_HAMRADIO is not set
    >
    > #
    > # IrDA (infrared) support
    > #
    > # CONFIG_IRDA is not set
    >
    > #
    > # Bluetooth support
    > #
    > # CONFIG_BT is not set
    >
    > #
    > # ISDN subsystem
    > #
    > # CONFIG_ISDN_BOOL is not set
    >
    > #
    > # Telephony Support
    > #
    > # CONFIG_PHONE is not set
    >
    > #
    > # Input device support
    > #
    > CONFIG_INPUT=y
    >
    > #
    > # Userland interfaces
    > #
    > CONFIG_INPUT_MOUSEDEV=y
    > CONFIG_INPUT_MOUSEDEV_PSAUX=y
    > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    > # CONFIG_INPUT_JOYDEV is not set
    > # CONFIG_INPUT_TSDEV is not set
    > # CONFIG_INPUT_EVDEV is not set
    > # CONFIG_INPUT_EVBUG is not set
    >
    > #
    > # Input I/O drivers
    > #
    > # CONFIG_GAMEPORT is not set
    > CONFIG_SOUND_GAMEPORT=y
    > CONFIG_SERIO=y
    > CONFIG_SERIO_I8042=y
    > # CONFIG_SERIO_SERPORT is not set
    > # CONFIG_SERIO_CT82C710 is not set
    > # CONFIG_SERIO_PCIPS2 is not set
    >
    > #
    > # Input Device Drivers
    > #
    > CONFIG_INPUT_KEYBOARD=y
    > CONFIG_KEYBOARD_ATKBD=y
    > # CONFIG_KEYBOARD_SUNKBD is not set
    > # CONFIG_KEYBOARD_XTKBD is not set
    > # CONFIG_KEYBOARD_NEWTON is not set
    > CONFIG_INPUT_MOUSE=y
    > CONFIG_MOUSE_PS2=y
    > # CONFIG_MOUSE_PS2_SYNAPTICS is not set
    > # CONFIG_MOUSE_SERIAL is not set
    > # CONFIG_MOUSE_INPORT is not set
    > # CONFIG_MOUSE_LOGIBM is not set
    > # CONFIG_MOUSE_PC110PAD is not set
    > # CONFIG_INPUT_JOYSTICK is not set
    > # CONFIG_INPUT_TOUCHSCREEN is not set
    > # CONFIG_INPUT_MISC is not set
    >
    > #
    > # Character devices
    > #
    > CONFIG_VT=y
    > CONFIG_VT_CONSOLE=y
    > CONFIG_HW_CONSOLE=y
    > # CONFIG_SERIAL_NONSTANDARD is not set
    >
    > #
    > # Serial drivers
    > #
    > CONFIG_SERIAL_8250=m
    > # CONFIG_SERIAL_8250_ACPI is not set
    > CONFIG_SERIAL_8250_NR_UARTS=4
    > # CONFIG_SERIAL_8250_EXTENDED is not set
    >
    > #
    > # Non-8250 serial port support
    > #
    > CONFIG_SERIAL_CORE=m
    > CONFIG_UNIX98_PTYS=y
    > CONFIG_UNIX98_PTY_COUNT=256
    >
    > #
    > # I2C support
    > #
    > # CONFIG_I2C is not set
    >
    > #
    > # I2C Algorithms
    > #
    >
    > #
    > # I2C Hardware Bus support
    > #
    >
    > #
    > # I2C Hardware Sensors Chip support
    > #
    > # CONFIG_I2C_SENSOR is not set
    >
    > #
    > # Mice
    > #
    > # CONFIG_BUSMOUSE is not set
    > # CONFIG_QIC02_TAPE is not set
    >
    > #
    > # IPMI
    > #
    > # CONFIG_IPMI_HANDLER is not set
    >
    > #
    > # Watchdog Cards
    > #
    > # CONFIG_WATCHDOG is not set
    > CONFIG_HW_RANDOM=m
    > CONFIG_NVRAM=m
    > CONFIG_RTC=m
    > CONFIG_GEN_RTC=m
    > CONFIG_GEN_RTC_X=y
    > # CONFIG_DTLK is not set
    > # CONFIG_R3964 is not set
    > # CONFIG_APPLICOM is not set
    > # CONFIG_SONYPI is not set
    >
    > #
    > # Ftape, the floppy tape device driver
    > #
    > # CONFIG_FTAPE is not set
    > CONFIG_AGP=m
    > # CONFIG_AGP_ALI is not set
    > # CONFIG_AGP_ATI is not set
    > # CONFIG_AGP_AMD is not set
    > # CONFIG_AGP_AMD64 is not set
    > # CONFIG_AGP_INTEL is not set
    > CONFIG_AGP_NVIDIA=m
    > # CONFIG_AGP_SIS is not set
    > # CONFIG_AGP_SWORKS is not set
    > # CONFIG_AGP_VIA is not set
    > # CONFIG_DRM is not set
    > # CONFIG_MWAVE is not set
    > # CONFIG_RAW_DRIVER is not set
    > # CONFIG_HANGCHECK_TIMER is not set
    >
    > #
    > # Multimedia devices
    > #
    > # CONFIG_VIDEO_DEV is not set
    >
    > #
    > # Digital Video Broadcasting Devices
    > #
    > # CONFIG_DVB is not set
    >
    > #
    > # Graphics support
    > #
    > CONFIG_FB=y
    > # CONFIG_FB_CYBER2000 is not set
    > # CONFIG_FB_IMSTT is not set
    > # CONFIG_FB_VGA16 is not set
    > CONFIG_FB_VESA=y
    > CONFIG_VIDEO_SELECT=y
    > # CONFIG_FB_HGA is not set
    > CONFIG_FB_RIVA=m
    > # CONFIG_FB_MATROX is not set
    > # CONFIG_FB_RADEON is not set
    > # CONFIG_FB_ATY128 is not set
    > # CONFIG_FB_ATY is not set
    > # CONFIG_FB_SIS is not set
    > # CONFIG_FB_NEOMAGIC is not set
    > # CONFIG_FB_3DFX is not set
    > # CONFIG_FB_VOODOO1 is not set
    > # CONFIG_FB_TRIDENT is not set
    > # CONFIG_FB_VIRTUAL is not set
    >
    > #
    > # Console display driver support
    > #
    > CONFIG_VGA_CONSOLE=y
    > # CONFIG_MDA_CONSOLE is not set
    > CONFIG_DUMMY_CONSOLE=y
    > CONFIG_FRAMEBUFFER_CONSOLE=y
    > CONFIG_PCI_CONSOLE=y
    > CONFIG_FONTS=y
    > CONFIG_FONT_8x8=y
    > CONFIG_FONT_8x16=y
    > # CONFIG_FONT_6x11 is not set
    > # CONFIG_FONT_PEARL_8x8 is not set
    > # CONFIG_FONT_ACORN_8x8 is not set
    > # CONFIG_FONT_MINI_4x6 is not set
    > # CONFIG_FONT_SUN8x16 is not set
    > # CONFIG_FONT_SUN12x22 is not set
    >
    > #
    > # Logo configuration
    > #
    > # CONFIG_LOGO is not set
    >
    > #
    > # Sound
    > #
    > CONFIG_SOUND=m
    >
    > #
    > # Advanced Linux Sound Architecture
    > #
    > CONFIG_SND=m
    > CONFIG_SND_SEQUENCER=m
    > # CONFIG_SND_SEQ_DUMMY is not set
    > CONFIG_SND_OSSEMUL=y
    > CONFIG_SND_MIXER_OSS=m
    > CONFIG_SND_PCM_OSS=m
    > CONFIG_SND_SEQUENCER_OSS=y
    > # CONFIG_SND_RTCTIMER is not set
    > # CONFIG_SND_VERBOSE_PRINTK is not set
    > # CONFIG_SND_DEBUG is not set
    >
    > #
    > # Generic devices
    > #
    > # CONFIG_SND_DUMMY is not set
    > # CONFIG_SND_VIRMIDI is not set
    > # CONFIG_SND_MTPAV is not set
    > # CONFIG_SND_SERIAL_U16550 is not set
    > # CONFIG_SND_MPU401 is not set
    >
    > #
    > # ISA devices
    > #
    > # CONFIG_SND_AD1848 is not set
    > # CONFIG_SND_CS4231 is not set
    > # CONFIG_SND_CS4232 is not set
    > # CONFIG_SND_CS4236 is not set
    > # CONFIG_SND_ES1688 is not set
    > # CONFIG_SND_ES18XX is not set
    > # CONFIG_SND_GUSCLASSIC is not set
    > # CONFIG_SND_GUSEXTREME is not set
    > # CONFIG_SND_GUSMAX is not set
    > # CONFIG_SND_INTERWAVE is not set
    > # CONFIG_SND_INTERWAVE_STB is not set
    > # CONFIG_SND_OPTI92X_AD1848 is not set
    > # CONFIG_SND_OPTI92X_CS4231 is not set
    > # CONFIG_SND_OPTI93X is not set
    > # CONFIG_SND_SB8 is not set
    > # CONFIG_SND_SB16 is not set
    > # CONFIG_SND_SBAWE is not set
    > # CONFIG_SND_WAVEFRONT is not set
    > # CONFIG_SND_CMI8330 is not set
    > # CONFIG_SND_OPL3SA2 is not set
    > # CONFIG_SND_SGALAXY is not set
    > # CONFIG_SND_SSCAPE is not set
    >
    > #
    > # PCI devices
    > #
    > # CONFIG_SND_ALI5451 is not set
    > # CONFIG_SND_AZT3328 is not set
    > # CONFIG_SND_CS46XX is not set
    > # CONFIG_SND_CS4281 is not set
    > # CONFIG_SND_EMU10K1 is not set
    > # CONFIG_SND_KORG1212 is not set
    > # CONFIG_SND_NM256 is not set
    > # CONFIG_SND_RME32 is not set
    > # CONFIG_SND_RME96 is not set
    > # CONFIG_SND_RME9652 is not set
    > # CONFIG_SND_HDSP is not set
    > # CONFIG_SND_TRIDENT is not set
    > # CONFIG_SND_YMFPCI is not set
    > # CONFIG_SND_ALS4000 is not set
    > # CONFIG_SND_CMIPCI is not set
    > # CONFIG_SND_ENS1370 is not set
    > # CONFIG_SND_ENS1371 is not set
    > # CONFIG_SND_ES1938 is not set
    > # CONFIG_SND_ES1968 is not set
    > # CONFIG_SND_MAESTRO3 is not set
    > # CONFIG_SND_FM801 is not set
    > # CONFIG_SND_ICE1712 is not set
    > # CONFIG_SND_ICE1724 is not set
    > CONFIG_SND_INTEL8X0=m
    > # CONFIG_SND_SONICVIBES is not set
    > # CONFIG_SND_VIA82XX is not set
    > # CONFIG_SND_VX222 is not set
    >
    > #
    > # ALSA USB devices
    > #
    > # CONFIG_SND_USB_AUDIO is not set
    >
    > #
    > # Open Sound System
    > #
    > # CONFIG_SOUND_PRIME is not set
    >
    > #
    > # USB support
    > #
    > CONFIG_USB=m
    > # CONFIG_USB_DEBUG is not set
    >
    > #
    > # Miscellaneous USB options
    > #
    > CONFIG_USB_DEVICEFS=y
    > # CONFIG_USB_BANDWIDTH is not set
    > # CONFIG_USB_DYNAMIC_MINORS is not set
    >
    > #
    > # USB Host Controller Drivers
    > #
    > CONFIG_USB_EHCI_HCD=m
    > CONFIG_USB_OHCI_HCD=m
    > CONFIG_USB_UHCI_HCD=m
    >
    > #
    > # USB Device Class drivers
    > #
    > # CONFIG_USB_AUDIO is not set
    > # CONFIG_USB_BLUETOOTH_TTY is not set
    > # CONFIG_USB_MIDI is not set
    > # CONFIG_USB_ACM is not set
    > # CONFIG_USB_PRINTER is not set
    > CONFIG_USB_STORAGE=m
    > # CONFIG_USB_STORAGE_DEBUG is not set
    > # CONFIG_USB_STORAGE_DATAFAB is not set
    > # CONFIG_USB_STORAGE_FREECOM is not set
    > # CONFIG_USB_STORAGE_ISD200 is not set
    > # CONFIG_USB_STORAGE_DPCM is not set
    > # CONFIG_USB_STORAGE_HP8200e is not set
    > # CONFIG_USB_STORAGE_SDDR09 is not set
    > # CONFIG_USB_STORAGE_SDDR55 is not set
    > # CONFIG_USB_STORAGE_JUMPSHOT is not set
    >
    > #
    > # USB Human Interface Devices (HID)
    > #
    > CONFIG_USB_HID=m
    > CONFIG_USB_HIDINPUT=y
    > # CONFIG_HID_FF is not set
    > # CONFIG_USB_HIDDEV is not set
    >
    > #
    > # USB HID Boot Protocol drivers
    > #
    > # CONFIG_USB_KBD is not set
    > # CONFIG_USB_MOUSE is not set
    > # CONFIG_USB_AIPTEK is not set
    > # CONFIG_USB_WACOM is not set
    > # CONFIG_USB_KBTAB is not set
    > # CONFIG_USB_POWERMATE is not set
    > # CONFIG_USB_XPAD is not set
    >
    > #
    > # USB Imaging devices
    > #
    > # CONFIG_USB_MDC800 is not set
    > # CONFIG_USB_SCANNER is not set
    > # CONFIG_USB_MICROTEK is not set
    > # CONFIG_USB_HPUSBSCSI is not set
    >
    > #
    > # USB Multimedia devices
    > #
    > # CONFIG_USB_DABUSB is not set
    >
    > #
    > # Video4Linux support is needed for USB Multimedia device support
    > #
    >
    > #
    > # USB Network adaptors
    > #
    > # CONFIG_USB_CATC is not set
    > # CONFIG_USB_KAWETH is not set
    > # CONFIG_USB_PEGASUS is not set
    > # CONFIG_USB_RTL8150 is not set
    > # CONFIG_USB_USBNET is not set
    >
    > #
    > # USB port drivers
    > #
    >
    > #
    > # USB Serial Converter support
    > #
    > # CONFIG_USB_SERIAL is not set
    >
    > #
    > # USB Miscellaneous drivers
    > #
    > # CONFIG_USB_TIGL is not set
    > # CONFIG_USB_AUERSWALD is not set
    > # CONFIG_USB_RIO500 is not set
    > # CONFIG_USB_BRLVGER is not set
    > # CONFIG_USB_LCD is not set
    > # CONFIG_USB_TEST is not set
    > # CONFIG_USB_GADGET is not set
    >
    > #
    > # File systems
    > #
    > CONFIG_EXT2_FS=y
    > # CONFIG_EXT2_FS_XATTR is not set
    > CONFIG_EXT3_FS=y
    > CONFIG_EXT3_FS_XATTR=y
    > # CONFIG_EXT3_FS_POSIX_ACL is not set
    > # CONFIG_EXT3_FS_SECURITY is not set
    > CONFIG_JBD=y
    > # CONFIG_JBD_DEBUG is not set
    > CONFIG_FS_MBCACHE=y
    > # CONFIG_REISERFS_FS is not set
    > # CONFIG_JFS_FS is not set
    > # CONFIG_XFS_FS is not set
    > # CONFIG_MINIX_FS is not set
    > # CONFIG_ROMFS_FS is not set
    > # CONFIG_QUOTA is not set
    > # CONFIG_AUTOFS_FS is not set
    > # CONFIG_AUTOFS4_FS is not set
    >
    > #
    > # CD-ROM/DVD Filesystems
    > #
    > CONFIG_ISO9660_FS=m
    > CONFIG_JOLIET=y
    > # CONFIG_ZISOFS is not set
    > CONFIG_UDF_FS=m
    >
    > #
    > # DOS/FAT/NT Filesystems
    > #
    > CONFIG_FAT_FS=m
    > CONFIG_MSDOS_FS=m
    > CONFIG_VFAT_FS=m
    > # CONFIG_NTFS_FS is not set
    >
    > #
    > # Pseudo filesystems
    > #
    > CONFIG_PROC_FS=y
    > CONFIG_PROC_KCORE=y
    > # CONFIG_DEVFS_FS is not set
    > CONFIG_DEVPTS_FS=y
    > # CONFIG_DEVPTS_FS_XATTR is not set
    > CONFIG_TMPFS=y
    > # CONFIG_HUGETLBFS is not set
    > # CONFIG_HUGETLB_PAGE is not set
    > CONFIG_RAMFS=y
    >
    > #
    > # Miscellaneous filesystems
    > #
    > # CONFIG_ADFS_FS is not set
    > # CONFIG_AFFS_FS is not set
    > # CONFIG_HFS_FS is not set
    > # CONFIG_BEFS_FS is not set
    > # CONFIG_BFS_FS is not set
    > # CONFIG_EFS_FS is not set
    > # CONFIG_CRAMFS is not set
    > # CONFIG_VXFS_FS is not set
    > # CONFIG_HPFS_FS is not set
    > # CONFIG_QNX4FS_FS is not set
    > # CONFIG_SYSV_FS is not set
    > # CONFIG_UFS_FS is not set
    >
    > #
    > # Network File Systems
    > #
    > # CONFIG_NFS_FS is not set
    > # CONFIG_NFSD is not set
    > # CONFIG_EXPORTFS is not set
    > # CONFIG_SMB_FS is not set
    > # CONFIG_CIFS is not set
    > # CONFIG_NCP_FS is not set
    > # CONFIG_CODA_FS is not set
    > # CONFIG_INTERMEZZO_FS is not set
    > # CONFIG_AFS_FS is not set
    >
    > #
    > # Partition Types
    > #
    > # CONFIG_PARTITION_ADVANCED is not set
    > CONFIG_MSDOS_PARTITION=y
    > CONFIG_NLS=y
    >
    > #
    > # Native Language Support
    > #
    > CONFIG_NLS_DEFAULT="iso8859-1"
    > CONFIG_NLS_CODEPAGE_437=y
    > # CONFIG_NLS_CODEPAGE_737 is not set
    > # CONFIG_NLS_CODEPAGE_775 is not set
    > # CONFIG_NLS_CODEPAGE_850 is not set
    > # CONFIG_NLS_CODEPAGE_852 is not set
    > # CONFIG_NLS_CODEPAGE_855 is not set
    > # CONFIG_NLS_CODEPAGE_857 is not set
    > # CONFIG_NLS_CODEPAGE_860 is not set
    > # CONFIG_NLS_CODEPAGE_861 is not set
    > # CONFIG_NLS_CODEPAGE_862 is not set
    > # CONFIG_NLS_CODEPAGE_863 is not set
    > # CONFIG_NLS_CODEPAGE_864 is not set
    > # CONFIG_NLS_CODEPAGE_865 is not set
    > # CONFIG_NLS_CODEPAGE_866 is not set
    > # CONFIG_NLS_CODEPAGE_869 is not set
    > # CONFIG_NLS_CODEPAGE_936 is not set
    > # CONFIG_NLS_CODEPAGE_950 is not set
    > # CONFIG_NLS_CODEPAGE_932 is not set
    > # CONFIG_NLS_CODEPAGE_949 is not set
    > # CONFIG_NLS_CODEPAGE_874 is not set
    > # CONFIG_NLS_ISO8859_8 is not set
    > # CONFIG_NLS_CODEPAGE_1250 is not set
    > # CONFIG_NLS_CODEPAGE_1251 is not set
    > CONFIG_NLS_ISO8859_1=y
    > # CONFIG_NLS_ISO8859_2 is not set
    > # CONFIG_NLS_ISO8859_3 is not set
    > # CONFIG_NLS_ISO8859_4 is not set
    > # CONFIG_NLS_ISO8859_5 is not set
    > # CONFIG_NLS_ISO8859_6 is not set
    > # CONFIG_NLS_ISO8859_7 is not set
    > # CONFIG_NLS_ISO8859_9 is not set
    > # CONFIG_NLS_ISO8859_13 is not set
    > # CONFIG_NLS_ISO8859_14 is not set
    > # CONFIG_NLS_ISO8859_15 is not set
    > # CONFIG_NLS_KOI8_R is not set
    > # CONFIG_NLS_KOI8_U is not set
    > # CONFIG_NLS_UTF8 is not set
    >
    > #
    > # Profiling support
    > #
    > # CONFIG_PROFILING is not set
    >
    > #
    > # Kernel hacking
    > #
    > # CONFIG_DEBUG_KERNEL is not set
    > CONFIG_DEBUG_SPINLOCK_SLEEP=y
    > CONFIG_FRAME_POINTER=y
    > CONFIG_X86_EXTRA_IRQS=y
    > CONFIG_X86_FIND_SMP_CONFIG=y
    > CONFIG_X86_MPPARSE=y
    >
    > #
    > # Security options
    > #
    > # CONFIG_SECURITY is not set
    >
    > #
    > # Cryptographic options
    > #
    > # CONFIG_CRYPTO is not set
    >
    > #
    > # Library routines
    > #
    > CONFIG_CRC32=m
    > CONFIG_X86_BIOS_REBOOT=y
    > CONFIG_PC=y
    >
    > ---------------------------------------------------------------------------------
    > Ross Alexander "We demand clearly defined
    > MIS - NEC Europe Limited boundaries of uncertainty and
    > Work ph: +44 20 8752 3394 doubt."
    > -
    > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html
    > Please read the FAQ at http://www.tux.org/lkml/
    >

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:59    [W:0.135 / U:30.072 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site