lkml.org 
[lkml]   [2003]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: IDE DMA setting not available on 2.4.23 as a module
Date

Please send dmesg and .config for this case (built-in Intel IDE driver).

thanks,
--bart

On Sunday 30 of November 2003 23:42, Santiago Garcia Mantinan wrote:
> > Do you have piix.o module loaded or PIIX support compiled-in?
>
> I had it compiled in, I didn't knew it could be compiled as a module, I
> have tried compiling it as a module and DMA works ok, however the module
> along with ide-core are not removable as piix says it is being used.
>
> I have compiled the kernel again with ide modular and piix compiled in,
> just in case I had not done it that way before and in fact I had done it
> that way and I have verified that I had done it like that, DMA doesn't work
> as PIIX driver is not used, I don't see any PIIX4 messages or any BM-DMA
> ones when doing it this way, that is the problem.
>
> Hope this clarifies things a little bit.
>
> If you need any other info/test, don't hesitate to contact.
>
> Regards...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.034 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site