Messages in this thread | | | Date | Thu, 27 Nov 2003 12:37:07 +0100 | Subject | PROBLEM: trouble with usb mouse after suspending | From | "Titus v. d. Malsburg" <> |
| |
[1.] One line summary of the problem: trouble with usb mouse after suspending
[2.] Full description of the problem/report: Notebook has a synaptics touchpad and a logitech usb mouse attached. Sending the notebook to sleep by apm --suspend and wake it afterwards yields the following (boot procedure is included as well): (/var/log/messages)
Nov 27 11:52:50 vlana syslogd 1.4.1#13: restart. Nov 27 11:52:50 vlana kernel: klogd 1.4.1#13, log source = /proc/kmsg started. Nov 27 11:52:50 vlana kernel: Cannot find map file. Nov 27 11:52:50 vlana kernel: No module symbols loaded - kernel modules not enabled. Nov 27 11:52:50 vlana kernel: Linux version 2.6.0-test10 (root@vlana) (gcc version 3.3.2 (Debian)) #2 Tue Nov 25 14:19:42 CET 2003 Nov 27 11:52:50 vlana kernel: BIOS-provided physical RAM map: Nov 27 11:52:50 vlana kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Nov 27 11:52:50 vlana kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Nov 27 11:52:50 vlana kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Nov 27 11:52:50 vlana kernel: BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) Nov 27 11:52:50 vlana kernel: BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data) Nov 27 11:52:50 vlana kernel: BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS) Nov 27 11:52:50 vlana kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Nov 27 11:52:50 vlana kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Nov 27 11:52:50 vlana kernel: BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) Nov 27 11:52:50 vlana kernel: 127MB LOWMEM available. Nov 27 11:52:50 vlana kernel: On node 0 totalpages: 32752 Nov 27 11:52:50 vlana kernel: DMA zone: 4096 pages, LIFO batch:1 Nov 27 11:52:50 vlana kernel: Normal zone: 28656 pages, LIFO batch:6 Nov 27 11:52:50 vlana kernel: HighMem zone: 0 pages, LIFO batch:1 Nov 27 11:52:50 vlana kernel: DMI 2.1 present. Nov 27 11:52:50 vlana kernel: Building zonelist for node : 0 Nov 27 11:52:50 vlana kernel: Kernel command line: BOOT_IMAGE=Linux2.6.0 ro root=301 Nov 27 11:52:50 vlana kernel: Initializing CPU#0 Nov 27 11:52:50 vlana kernel: PID hash table entries: 512 (order 9: 4096 bytes) Nov 27 11:52:50 vlana kernel: Detected 228.521 MHz processor. Nov 27 11:52:50 vlana kernel: Console: colour VGA+ 80x25 Nov 27 11:52:50 vlana kernel: Memory: 126252k/131008k available (1931k kernel code, 4220k reserved, 724k data, 128k init, 0k highmem) Nov 27 11:52:50 vlana kernel: Calibrating delay loop... 1187.84 BogoMIPS Nov 27 11:52:50 vlana kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Nov 27 11:52:50 vlana kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Nov 27 11:52:50 vlana kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Nov 27 11:52:50 vlana kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Nov 27 11:52:50 vlana kernel: CPU: L2 cache: 256K Nov 27 11:52:50 vlana kernel: Intel machine check architecture supported. Nov 27 11:52:50 vlana kernel: Intel machine check reporting enabled on CPU#0. Nov 27 11:52:50 vlana kernel: CPU: Intel Pentium III (Coppermine) stepping 03 Nov 27 11:52:50 vlana kernel: Enabling fast FPU save and restore... done. Nov 27 11:52:50 vlana kernel: Enabling unmasked SIMD FPU exception support... done. Nov 27 11:52:50 vlana kernel: Checking 'hlt' instruction... OK. Nov 27 11:52:50 vlana kernel: POSIX conformance testing by UNIFIX Nov 27 11:52:50 vlana kernel: NET: Registered protocol family 16 Nov 27 11:52:50 vlana kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=1 Nov 27 11:52:50 vlana kernel: PCI: Using configuration type 1 Nov 27 11:52:50 vlana kernel: mtrr: v2.0 (20020519) Nov 27 11:52:50 vlana kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Nov 27 11:52:50 vlana kernel: SCSI subsystem initialized Nov 27 11:52:50 vlana kernel: Linux Kernel Card Services Nov 27 11:52:50 vlana kernel: options: [pci] [cardbus] [pm] Nov 27 11:52:50 vlana kernel: drivers/usb/core/usb.c: registered new driver usbfs Nov 27 11:52:50 vlana kernel: drivers/usb/core/usb.c: registered new driver hub Nov 27 11:52:50 vlana kernel: PCI: Probing PCI hardware Nov 27 11:52:50 vlana kernel: PCI: Probing PCI hardware (bus 00) Nov 27 11:52:50 vlana kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 Nov 27 11:52:50 vlana kernel: PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask Nov 27 11:52:50 vlana kernel: PCI: IRQ 0 for device 0000:00:0a.1 doesn't match PIRQ mask - try pci=usepirqmask Nov 27 11:52:50 vlana kernel: Machine check exception polling timer started. Nov 27 11:52:50 vlana kernel: cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Nov 27 11:52:50 vlana kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Nov 27 11:52:50 vlana kernel: Initializing Cryptographic API Nov 27 11:52:50 vlana kernel: Limiting direct PCI/PCI transfers. Nov 27 11:52:50 vlana kernel: pty: 256 Unix98 ptys configured Nov 27 11:52:50 vlana kernel: lp: driver loaded but no devices found Nov 27 11:52:50 vlana kernel: Linux agpgart interface v0.100 (c) Dave Jones Nov 27 11:52:50 vlana kernel: agpgart: Detected an Intel 440BX Chipset. Nov 27 11:52:50 vlana kernel: agpgart: Maximum main memory to use for agp memory: 94M Nov 27 11:52:50 vlana kernel: agpgart: AGP aperture is 64M @ 0xe0000000 Nov 27 11:52:50 vlana kernel: [drm] Initialized i830 1.3.2 20021108 on minor 0 Nov 27 11:52:50 vlana kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled Nov 27 11:52:50 vlana kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 27 11:52:50 vlana kernel: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A Nov 27 11:52:50 vlana kernel: parport0: PC-style at 0x378 [PCSPP(,...)] Nov 27 11:52:50 vlana kernel: lp0: using parport0 (polling). Nov 27 11:52:50 vlana kernel: Using anticipatory io scheduler Nov 27 11:52:50 vlana kernel: Floppy drive(s): fd0 is 1.44M Nov 27 11:52:50 vlana kernel: FDC 0 is a post-1991 82077 Nov 27 11:52:50 vlana kernel: PPP generic driver version 2.4.2 Nov 27 11:52:50 vlana kernel: PPP Deflate Compression module registered Nov 27 11:52:50 vlana kernel: PPP BSD Compression module registered Nov 27 11:52:50 vlana kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Nov 27 11:52:50 vlana kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 27 11:52:50 vlana kernel: PIIX4: IDE controller at PCI slot 0000:00:07.1 Nov 27 11:52:50 vlana kernel: PIIX4: chipset revision 1 Nov 27 11:52:50 vlana kernel: PIIX4: not 100%% native mode: will probe irqs later Nov 27 11:52:50 vlana kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Nov 27 11:52:50 vlana kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Nov 27 11:52:50 vlana kernel: Losing too many ticks! Nov 27 11:52:50 vlana kernel: TSC cannot be used as a timesource. (Are you running with SpeedStep?) Nov 27 11:52:50 vlana kernel: Falling back to a sane timesource. Nov 27 11:52:50 vlana kernel: hda: TOSHIBA MK1214GAP, ATA DISK drive Nov 27 11:52:50 vlana kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 27 11:52:50 vlana kernel: hdc: TOSHIBA CD-ROM XM-7002B, ATAPI CD/DVD-ROM drive Nov 27 11:52:50 vlana kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 27 11:52:50 vlana kernel: hda: max request size: 128KiB Nov 27 11:52:50 vlana kernel: hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33) Nov 27 11:52:50 vlana kernel: hda: hda1 hda2 hda3 Nov 27 11:52:50 vlana kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Nov 27 11:52:50 vlana kernel: Uniform CD-ROM driver Revision: 3.12 Nov 27 11:52:50 vlana kernel: PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask Nov 27 11:52:50 vlana kernel: PCI: Assigned IRQ 11 for device 0000:00:0a.0 Nov 27 11:52:50 vlana kernel: PCI: Sharing IRQ 11 with 0000:00:0a.1 Nov 27 11:52:50 vlana kernel: Yenta: CardBus bridge found at 0000:00:0a.0 [104c:ac1c] Nov 27 11:52:50 vlana kernel: Yenta: Enabling burst memory read transactions Nov 27 11:52:50 vlana kernel: Yenta: Using CSCINT to route CSC interrupts to PCI Nov 27 11:52:50 vlana kernel: Yenta: Routing CardBus interrupts to PCI Nov 27 11:52:50 vlana kernel: Yenta: ISA IRQ list 04b8, PCI irq11 Nov 27 11:52:50 vlana kernel: Socket status: 30000010 Nov 27 11:52:50 vlana kernel: PCI: Found IRQ 11 for device 0000:00:0a.1 Nov 27 11:52:50 vlana kernel: PCI: Sharing IRQ 11 with 0000:00:0a.0 Nov 27 11:52:50 vlana kernel: Yenta: CardBus bridge found at 0000:00:0a.1 [104c:ac1c] Nov 27 11:52:50 vlana kernel: Yenta: Using CSCINT to route CSC interrupts to PCI Nov 27 11:52:50 vlana kernel: Yenta: Routing CardBus interrupts to PCI Nov 27 11:52:50 vlana kernel: Yenta: ISA IRQ list 04b8, PCI irq11 Nov 27 11:52:50 vlana kernel: Socket status: 30000006 Nov 27 11:52:50 vlana kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Nov 27 11:52:50 vlana kernel: PCI: Found IRQ 9 for device 0000:00:07.2 Nov 27 11:52:50 vlana kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller Nov 27 11:52:50 vlana kernel: uhci_hcd 0000:00:07.2: irq 9, io base 0000e800 Nov 27 11:52:50 vlana kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 Nov 27 11:52:50 vlana kernel: hub 1-0:1.0: USB hub found Nov 27 11:52:50 vlana kernel: hub 1-0:1.0: 2 ports detected Nov 27 11:52:50 vlana kernel: drivers/usb/core/usb.c: registered new driver usblp Nov 27 11:52:50 vlana kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Nov 27 11:52:50 vlana kernel: Initializing USB Mass Storage driver... Nov 27 11:52:50 vlana kernel: drivers/usb/core/usb.c: registered new driver usb-storage Nov 27 11:52:50 vlana kernel: USB Mass Storage support registered. Nov 27 11:52:50 vlana kernel: drivers/usb/core/usb.c: registered new driver hid Nov 27 11:52:50 vlana kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Nov 27 11:52:50 vlana kernel: mice: PS/2 mouse device common for all mice Nov 27 11:52:50 vlana kernel: Synaptics Touchpad, model: 1 Nov 27 11:52:50 vlana kernel: Firmware: 4.0 Nov 27 11:52:50 vlana kernel: Sensor: 1 Nov 27 11:52:50 vlana kernel: new absolute packet format Nov 27 11:52:50 vlana kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio1 Nov 27 11:52:50 vlana kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 27 11:52:50 vlana kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Nov 27 11:52:50 vlana kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 27 11:52:50 vlana kernel: Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). Nov 27 11:52:50 vlana kernel: PCI: Found IRQ 9 for device 0000:00:09.0 Nov 27 11:52:50 vlana kernel: PCI: Sharing IRQ 9 with 0000:00:0c.0 Nov 27 11:52:50 vlana kernel: es1968: not attempting power management. Nov 27 11:52:50 vlana kernel: es1968: clocking to 48000 Nov 27 11:52:50 vlana kernel: ALSA device list: Nov 27 11:52:50 vlana kernel: #0: ESS ES1978 (Maestro 2E) at 0xea00, irq 9 Nov 27 11:52:50 vlana kernel: NET: Registered protocol family 2 Nov 27 11:52:50 vlana kernel: IP: routing cache hash table of 512 buckets, 4Kbytes Nov 27 11:52:50 vlana kernel: TCP: Hash tables configured (established 8192 bind 16384) Nov 27 11:52:50 vlana kernel: NET: Registered protocol family 1 Nov 27 11:52:50 vlana kernel: NET: Registered protocol family 17 Nov 27 11:52:50 vlana kernel: VFS: Mounted root (ext2 filesystem) readonly. Nov 27 11:52:50 vlana kernel: Freeing unused kernel memory: 128k freed Nov 27 11:52:50 vlana kernel: Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 Nov 27 11:52:51 vlana kernel: cs: IO port probe 0x0c00-0x0cff: clean. Nov 27 11:52:51 vlana kernel: cs: IO port probe 0x0800-0x08ff: clean. Nov 27 11:52:51 vlana kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x3c0-0x3df 0x400-0x44f 0x4d0-0x4d7 Nov 27 11:52:51 vlana kernel: cs: IO port probe 0x0a00-0x0aff: clean. Nov 27 11:52:51 vlana kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Nov 27 11:52:51 vlana kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:92:E1:A0 Nov 27 11:52:52 vlana lpd[260]: restarted Nov 27 11:53:25 vlana kernel: Synaptics Touchpad, model: 1 Nov 27 11:53:25 vlana kernel: Firmware: 4.0 Nov 27 11:53:25 vlana kernel: Sensor: 1 Nov 27 11:53:25 vlana kernel: new absolute packet format Nov 27 11:53:25 vlana kernel: hdc: start_power_step(step: 0) Nov 27 11:53:25 vlana kernel: hdc: completing PM request, suspend Nov 27 11:53:25 vlana kernel: hda: start_power_step(step: 0) Nov 27 11:53:25 vlana kernel: hda: start_power_step(step: 1) Nov 27 11:53:26 vlana kernel: hda: complete_power_step(step: 1, stat: 50, err: 0) Nov 27 11:53:26 vlana kernel: hda: completing PM request, suspend Nov 27 11:53:41 vlana kernel: hub 1-0:1.0: new USB device on port 1, assigned address 2 Nov 27 11:53:42 vlana kernel: hda: Wakeup request inited, waiting for !BSY... Nov 27 11:53:42 vlana kernel: hda: start_power_step(step: 1000) Nov 27 11:53:42 vlana kernel: blk: queue c119b400, I/O limit 4095Mb (mask 0xffffffff) Nov 27 11:53:42 vlana kernel: hda: completing PM request, resume Nov 27 11:53:42 vlana kernel: hdc: Wakeup request inited, waiting for !BSY... Nov 27 11:53:42 vlana kernel: hdc: start_power_step(step: 1000) Nov 27 11:53:42 vlana kernel: hdc: completing PM request, resume Nov 27 11:53:42 vlana kernel: Synaptics Touchpad, model: 1 Nov 27 11:53:42 vlana kernel: Firmware: 4.0 Nov 27 11:53:42 vlana kernel: Sensor: 1 Nov 27 11:53:42 vlana kernel: new absolute packet format Nov 27 11:53:47 vlana kernel: usb 1-1: control timeout on ep0out Nov 27 11:53:47 vlana kernel: uhci_hcd 0000:00:07.2: Unlink after no-IRQ? Different ACPI or APIC settings may help. Nov 27 11:55:03 vlana kernel: Synaptics Touchpad, model: 1 Nov 27 11:55:03 vlana kernel: Firmware: 4.0 Nov 27 11:55:03 vlana kernel: Sensor: 1 Nov 27 11:55:03 vlana kernel: new absolute packet format Nov 27 11:55:03 vlana kernel: hdc: start_power_step(step: 0) Nov 27 11:55:03 vlana kernel: hdc: completing PM request, suspend Nov 27 11:55:03 vlana kernel: hda: start_power_step(step: 0) Nov 27 11:55:03 vlana kernel: hda: start_power_step(step: 1) Nov 27 11:55:04 vlana kernel: hda: complete_power_step(step: 1, stat: 50, err: 0) Nov 27 11:55:04 vlana kernel: hda: completing PM request, suspend Nov 27 11:55:27 vlana kernel: hda: Wakeup request inited, waiting for !BSY... Nov 27 11:55:27 vlana kernel: hda: start_power_step(step: 1000) Nov 27 11:55:27 vlana kernel: blk: queue c119b400, I/O limit 4095Mb (mask 0xffffffff) Nov 27 11:55:27 vlana kernel: hda: completing PM request, resume Nov 27 11:55:27 vlana kernel: hdc: Wakeup request inited, waiting for !BSY... Nov 27 11:55:27 vlana kernel: hdc: start_power_step(step: 1000) Nov 27 11:55:27 vlana kernel: hdc: completing PM request, resume Nov 27 11:55:27 vlana kernel: Synaptics Touchpad, model: 1 Nov 27 11:55:27 vlana kernel: Firmware: 4.0 Nov 27 11:55:27 vlana kernel: Sensor: 1 Nov 27 11:55:27 vlana kernel: new absolute packet format
After this procedure the attached usb mouse seems to be dead. See /proc/bus/usb/devices before suspend:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test10 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c00c Rev= 6.20 S: Manufacturer=Logitech S: Product=USB Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
And afterwards:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test10 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 0.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 0 #Cfgs= 0 P: Vendor=0000 ProdID=0000 Rev= 0.00
When I tried this under XFree86 I observed tow different behaviours:
1) XFree seemed to be freezed totally 2) * USB mouse didn't work * Touchpad worked * anything else seemed to work fine
[3.] Keywords (i.e., modules, networking, kernel): usb, mouse, synaptics touchpad
[4.] Kernel version (from /proc/version): Linux version 2.6.0-test10 (root@vlana) (gcc version 3.3.2 (Debian)) #2 Tue Nov 25 14:19:42 CET 2003
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the problem (if possible)
[7.] Environment [7.1.] Software (add the output of the ver_linux script here) [7.2.] Processor information (from /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 3 cpu MHz : 228.521 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1187.84
[7.3.] Module information (from /proc/modules): (empty)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) ioports: 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0300-031f : pcnet_cs 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03e8-03ef : serial 03f6-03f6 : ide0 03f8-03ff : serial 0400-043f : 0000:00:07.3 0440-045f : 0000:00:07.3 0cf8-0cff : PCI conf1 4000-40ff : PCI CardBus #02 4400-44ff : PCI CardBus #02 4800-48ff : PCI CardBus #06 4c00-4cff : PCI CardBus #06 b000-cfff : PCI Bus #01 c800-c8ff : 0000:01:00.0 e800-e81f : 0000:00:07.2 e800-e81f : uhci_hcd ea00-eaff : 0000:00:09.0 ea00-eaff : ESS Maestro ec00-ecff : 0000:00:0c.0 ee00-ee07 : 0000:00:0c.0 ffa0-ffaf : 0000:00:07.1 ffa0-ffa7 : ide0 ffa8-ffaf : ide1
iomem: 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-07feffff : System RAM 00100000-002e2e92 : Kernel code 002e2e93-00397ebf : Kernel data 07ff0000-07ff7fff : ACPI Tables 07ff8000-07ffffff : ACPI Non-volatile Storage 10000000-10000fff : 0000:00:0a.0 10000000-10000fff : yenta_socket 10001000-10001fff : 0000:00:0a.1 10001000-10001fff : yenta_socket 10400000-107fffff : PCI CardBus #02 10800000-10bfffff : PCI CardBus #02 10c00000-10ffffff : PCI CardBus #06 11000000-113fffff : PCI CardBus #06 a0000000-a0000fff : card services e0000000-e3ffffff : 0000:00:00.0 fca00000-feafffff : PCI Bus #01 fd000000-fdffffff : 0000:01:00.0 feaff000-feafffff : 0000:01:00.0 febfff00-febfffff : 0000:00:0c.0 fec00000-fec00fff : reserved fee00000-fee00fff : reserved ff900000-ff9fffff : PCI Bus #01 fffe0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000b000-0000cfff Memory behind bridge: fca00000-feafffff Prefetchable memory behind bridge: ff900000-ff9fffff BridgeCtl: Parity+ SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at e800 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:09.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) Subsystem: ESS Technology: Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at ea00 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Texas Instruments PCI1225 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Texas Instruments PCI1225 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:0c.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) Subsystem: AMBIT Microsystem Corp.: Unknown device 0440 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at febfff00 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at ee00 [size=8] Region 2: I/O ports at ec00 [size=256] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage LT Pro AGP 2X Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size: 0x04 (16 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at c800 [size=256] Region 2: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [5c] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi) (does not exist)
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
The message that showd up in /var(log/messages when XFree freezed totally: Nov 26 22:26:27 vlana kernel: Synaptics driver lost sync at 1st byte
This showed up in all my terminal emulators after the suspend process: vlana kernel: Bank 1: e2000000000000f1
/proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0007 Version=0000 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 H: Handlers=mouse0 B: EV=b B: KEY=6420 0 670000 0 0 0 0 0 0 0 0 B: ABS=11000003
I: Bus=0011 Vendor=0001 Product=0002 Version=ab02 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 H: Handlers=kbd B: EV=120003 B: KEY=4 2200000 c061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe B: LED=7
/proc/bus/input/handlers: N: Number=0 Name=kbd N: Number=1 Name=mousedev Minor=32
[X.] Other notes, patches, fixes, workarounds: I'm no kernel hacker => ...
I hope this report helps you somehow.
As I'm not on the mailing list please CC me for comments / questions!
Regards, Titus von der Malsburg
___ Blaise Pascal: "I apologize for this long letter. I didn't have the time to make it any shorter."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |