Messages in this thread | | | Date | Wed, 26 Nov 2003 22:20:57 -0800 | Subject | APM Suspend Problem | From | Misha Nasledov <> |
| |
Hi,
Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had issues with it suspending before, I don't remember exactly what issues, but I know that it definitely worked in -test2. When I hit the key on my laptop to suspend, it will turn off the LCD and the HD will spin down, but the machine will not actually suspend. Here is what is printed out on the console when I hit the suspend key and then when I hit another key to "wake" it up:
hdc: start_power_step(step: 0) hdc: completing PM request, suspend hda: start_power_step(step: 0) hda: start_power_step(step: 1) hda: complete_power_step(step: 1, stat: 50, err: 0) hda: completing PM request, suspend hda: Wakeup request inited, waiting for !BSY... hda: start_power_step(step: 1000) blk: queue c138fa00, I/O limit 4095Mb (mask 0xffffffff) hda: completing PM request, resume hdc: Wakeup request inited, waiting for !BSY... hdc: start_power_step(step: 1000) hdc: completing PM request, resume
I have attached the output of dmesg and my .config file. I am using 2.6.0-test11, of course. -- Misha Nasledov misha@nasledov.com http://nasledov.com/misha/ Linux version 2.6.0-test11 (root@aurora.alkaid.org) (gcc version 3.3.2 (Debian)) #1 Wed Nov 26 19:07:33 PST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data) BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: root=/dev/hda1 idebus=66 video=vesa:mtrr vga=0x317 ide_setup: idebus=66 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 796.590 MHz processor. Console: colour dummy device 80x25 Memory: 255120k/262080k available (2406k kernel code, 6232k reserved, 805k data, 224k init, 0k highmem) Calibrating delay loop... 1572.86 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7210 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1ef, dseg 0x400 pnp: 00:00: ioport range 0x15e8-0x15ef has been reserved pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0b: ioport range 0x1000-0x103f has been reserved pnp: 00:0b: ioport range 0x1040-0x104f has been reserved PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver Linux Kernel Card Services options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Address space collision on region 7 of bridge 0000:00:07.3 [1000:103f] PCI: Address space collision on region 8 of bridge 0000:00:07.3 [1040:105f] PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 vesafb: framebuffer at 0xf0000000, mapped to 0xd0800000, size 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:8704 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 speedstep-smi: signature:0x47534943, command:0x008200b2, event:0x00c000b3, perf_level:0x07d00000. speedstep-smi: could not detect low and high frequencies by SMI call. cpufreq: change to 0 MHz succeded cpufreq: change to 4 MHz succeded speedstep-smi: workaround worked. cpufreq: currently at high speed setting - 800 MHz apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API Limiting direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xf8000000 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 66MHz system bus speed for PIO modes PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK4019GAX, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 128x48 PCI: Found IRQ 11 for device 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:05.0 PCI: Sharing IRQ 11 with 0000:01:00.0 Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 06b8, PCI irq11 Socket status: 30000006 PCI: Found IRQ 11 for device 0000:00:02.1 Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 06b8, PCI irq11 Socket status: 30000006 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 11 for device 0000:00:07.2 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 11, io base 00001c20 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) ip_tables: (C) 2000-2002 Netfilter core team Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed Adding 498952k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda1, internal journal PCI: Found IRQ 11 for device 0000:00:05.0 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:01:00.0 Crystal 4280/46xx + AC97 Audio, version 1.28.32, 18:57:43 Nov 26 2003 cs46xx: Card found at 0xe8100000 and 0xe8000000, IRQ 11 cs46xx: Thinkpad 600X/A20/T20 (1014:0153) at 0xe8100000/0xe8000000, IRQ 11 ac97_codec: AC97 Audio codec, id: CRY20 (Cirrus Logic CS4297A rev B) PCI: Found IRQ 11 for device 0000:00:03.0 PCI: Sharing IRQ 11 with 0000:00:03.1 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.19 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Disabled Privacy Extensions on device c03ea200(lo) eth0: no IPv6 routers present cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. [unhandled content-type:application/octet-stream] | |