[lkml]   [2003]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: de2104x tulip driver bug in 2.6.0-test9
Russell Coker wrote:
> 00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21041
> [Tulip Pass 3] (rev 11)
> Above is the lspci output for my PCI Ethernet card. Below is what happens
> when I try to boot 2.6.0-test9. 2.4.x kernels have been working well on the
> same card for a long time, so the hardware seems basically OK.
> Configuring network interfaces... eth0: set link BNC
> eth0: mode 0x7ffc0040, sia 0x10c4,0xffffef09,0xfffff7fd,0xffff0006
> eth0: set mode 0x7ffc0000, set sia 0xef09,0xf7fd,0x6
> eth0: timeout expired stopping DMA

could this be anyhow related to this:

there is a thread on linuxppc-dev too, as this is ppc specific:

it looks similar, but here on ppc32 i got no oops :-(

BOFH excuse #27:

radiosity depletion

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:58    [W:0.070 / U:43.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site