lkml.org 
[lkml]   [2003]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: 2.6.0-test9-mm3 - AIO test results
From
Date
Suparna,

I was unable to reproduce the hang in io_submit() without your patch.
I ran aiocp with 1k i/o size constantly for 2 hours and it never hung.

I re-ran with your patch with both as-iosched and deadline and both
hung in io_submit(). aiocp would run a few times, but I put the
aiocp in a while loop and it hung on the 1st or 2nd time. It
did get most of the way through copying the file before hanging.
This is on a 2-proc to ide disks running ext3.

Here is the stack trace and other info for as-iosched:
daniel 2005 0.7 0.0 1388 384 pts/0 D 13:51 0:08 aiocp -dd -b 1k -n 8 -f DIRECT glibc-2.3.2.tar ff2
cat /proc/2005/wchan
io_schedule

aiocp D 00000001 2005 1870 (NOTLB)
e53cfc08 00200086 c18d3c80 00000001 00000003 c02897fc 00000060 00200246
f7cdb8b4 c0191630 c18d3c80 0000bfc6 78d5d3e5 00000233 e4dc1980 c0289a16
f7cdb8b4 d92978e4 c18d3c80 00000000 00000001 e53cfc14 c0123712 e53ce000
Call Trace:
[<c02897fc>] generic_unplug_device+0x50/0xbd
[<c0191630>] dio_bio_add_page+0x34/0x79
[<c0289a16>] blk_run_queues+0xa9/0x15c
[<c0123712>] io_schedule+0x26/0x30
[<c0192242>] direct_io_worker+0x376/0x5ab
[<c019264a>] __blockdev_direct_IO+0x1d3/0x2d5
[<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
[<c01ad72d>] ext3_direct_IO+0xc0/0x1e1
[<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
[<c014840f>] generic_file_direct_IO+0x70/0x89
[<c0147a80>] __generic_file_aio_write_nolock+0xa3a/0xda5
[<c025b049>] pty_write+0x1c8/0x1ca
[<c01480a4>] generic_file_aio_write+0x7e/0x115
[<c0256d12>] opost+0x9e/0x1cf
[<c01aa4a3>] ext3_file_write+0x3f/0xcc
[<c0194b3a>] aio_pwrite+0x3c/0xad
[<c0193bec>] aio_run_iocb+0xa6/0x1ed
[<c019316f>] __aio_get_req+0x27/0x158
[<c0194afe>] aio_pwrite+0x0/0xad
[<c02532ab>] tty_write+0x1e8/0x3b2
[<c0194f62>] io_submit_one+0x1ea/0x2b7
[<c0195110>] sys_io_submit+0xe1/0x194
[<c03c29a7>] syscall_call+0x7/0xb

For deadline iosched:

daniel 1889 0.1 0.0 1388 384 pts/0 D 15:12 0:01 aiocp -dd -b 1k -n 8 -f DIRECT glibc-2.3.2.tar ff2

$ cat /proc/1889/wchan
io_schedule

$ cat /sys/block/hdb/stat
209058 23145 45744 58542 209022 22069 0 20758 45210

aiocp D 0AD7701D 1889 1752 (NOTLB)
ee2ddd04 00200086 f75e6660 0ad7701d 0000004e 00200282 ebd37cbc 0ad7701d
0000004e f75e6660 c18d3c80 00060539 0ad7701d 0000004e f75e6000 0000006b
ee2ddd10 c0192212 c18d3c80 00000000 00000001 ee2ddd10 c0123712 ee2dc000
Call Trace:
[<c0192212>] direct_io_worker+0x346/0x5ab
[<c0123712>] io_schedule+0x26/0x30
[<c0192242>] direct_io_worker+0x376/0x5ab
[<c019264a>] __blockdev_direct_IO+0x1d3/0x2d5
[<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
[<c01ad72d>] ext3_direct_IO+0xc0/0x1e1
[<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
[<c014840f>] generic_file_direct_IO+0x70/0x89
[<c0145e11>] __generic_file_aio_read+0xfb/0x1ff
[<c0259d3e>] write_chan+0x165/0x21e
[<c0145f48>] generic_file_aio_read+0x33/0x37
[<c0194ad3>] aio_pread+0x34/0x5f
[<c0193bec>] aio_run_iocb+0xa6/0x1ed
[<c019316f>] __aio_get_req+0x27/0x158
[<c0194a9f>] aio_pread+0x0/0x5f
[<c02532ab>] tty_write+0x1e8/0x3b2
[<c0194f62>] io_submit_one+0x1ea/0x2b7
[<c0195110>] sys_io_submit+0xe1/0x194
[<c03c29a7>] syscall_call+0x7/0xb


The hung processes are stuck in the 'D' state and unkillable, of course.
I would appear something is wrong with your patch. Any ideas?

Daniel




On Tue, 2003-11-18 at 03:55, Suparna Bhattacharya wrote:
> I don't seem to able to recreate this at my end - even with 1k
> block sizes. Did you notice if this problem occurs without
> the latest patch ?
>
> Regards
> Suparna
>
> On Mon, Nov 17, 2003 at 05:37:14PM -0800, Daniel McNeil wrote:
> > Obviously, the ps output in my previous email showed that the hangs were
> > with 1k i/o sizes.
> >
> > More testing using 2k, 4k, 16k, 32k, 64k, 128k, 256k and 512k all
> > completed correctly.
> >
> > Even 11k and 17k worked.
> >
> > $ ls -l
> > -rw------- 1 daniel daniel 88289280 Jun 9 16:54 glibc-2.3.2.tar
> > -rw-rw-r-- 1 daniel daniel 88289280 Nov 17 17:32 ff2
> >
> >
> > So, only 1k is hanging so far.
> >
> > Daniel
> >
> > On Mon, 2003-11-17 at 17:15, Daniel McNeil wrote:
> > > Suparna,
> > >
> > > Good news and bad news. Your patch does fix the non-power of two i/o
> > > size problems where AIO previously did not complete:
> > >
> > > $ ./aiodio_sparse -s 1751k -r 18k -w 11k
> > > $ aiodio_sparse -i 9 -dd -s 180k -r 18k -w 18k
> > > io_submit() return 9
> > > aiodio_sparse: 9 i/o in flight
> > > aiodio_sparse: offset 165888 filesize 184320 inflight 9
> > > aiodio_sparse: io_getevent() returned 1
> > > aiodio_sparse: io_getevent() res 18432 res2 0
> > > io_submit() return 1
> > > AIO DIO write done unlinking file
> > > dio_sparse done writing, kill children
> > > aiodio_sparse 0 children had errors
> > >
> > > But when testing using aiocp using O_DIRECT to copy a file to
> > > an already allocated file, the aiocp process hangs. I used i/o
> > > size of 4k and that compeleted. Using i/o size of 1k and 2k,
> > > the aiocp process hung during io_sumbit() and are unkillable.
> > > Here are the stack traces:
> > >
> > > # ps -fu daniel | grep aiocp
> > > daniel 1920 1 0 16:45 ? 00:00:07 aiocp -b 1k -n 1 -f DIRECT glibc-2.3.2.tar ff2
> > > daniel 2083 2037 0 17:00 pts/2 00:00:03 aiocp -dd -b 1k -n 8 -f DIRECT glibc-2.3.2.tar ff2
> > >
> > >
> > > aiocp D 00000001 1920 1 1902 (NOTLB)
> > > e70abd04 00200086 c18dbc80 00000001 00000003 c02897fc 00000060 00200246
> > > f7cdb8b4 c16522f0 c18dbc80 0000309c 640a05eb 0000008b e6d9e660
> > > c0289a16
> > > f7cdb8b4 e87e95cc c18dbc80 00000000 00000001 e70abd10 c0123712
> > > e70aa000
> > > Call Trace:
> > > [<c02897fc>] generic_unplug_device+0x50/0xbd
> > > [<c0289a16>] blk_run_queues+0xa9/0x15c
> > > [<c0123712>] io_schedule+0x26/0x30
> > > [<c0192242>] direct_io_worker+0x376/0x5ab
> > > [<c014840f>] generic_file_direct_IO+0x70/0x89
> > > [<c019264a>] __blockdev_direct_IO+0x1d3/0x2d5
> > > [<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
> > > [<c01ad72d>] ext3_direct_IO+0xc0/0x1e1
> > > [<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
> > > [<c014840f>] generic_file_direct_IO+0x70/0x89
> > > [<c0145e11>] __generic_file_aio_read+0xfb/0x1ff
> > > [<c0121b70>] schedule+0x3ac/0x7ef
> > > [<c0145f48>] generic_file_aio_read+0x33/0x37
> > > [<c0194ad3>] aio_pread+0x34/0x5f
> > > [<c0193bec>] aio_run_iocb+0xa6/0x1ed
> > > [<c019316f>] __aio_get_req+0x27/0x158
> > > [<c0194a9f>] aio_pread+0x0/0x5f
> > > [<c0194f62>] io_submit_one+0x1ea/0x2b7
> > > [<c0195110>] sys_io_submit+0xe1/0x194
> > > [<c03c29a7>] syscall_call+0x7/0xb
> > > [<c03c007b>] rpc_depopulate+0x1aa/0x24b
> > >
> > >
> > > aiocp D 366EDC94 2083 2037 (NOTLB)
> > > e758bd04 00200082 f71ba000 366edc94 00000161 c02897fc 00000060 366edc94
> > > 00000161 f71ba000 c18d3c80 000069a9 366f5a0e 00000161 e8d4acc0 c0289a16
> > > f7cdb8b4 e960465c c18d3c80 00000000 00000001 e758bd10 c0123712 e758a000
> > > Call Trace:
> > > [<c02897fc>] generic_unplug_device+0x50/0xbd
> > > [<c0289a16>] blk_run_queues+0xa9/0x15c
> > > [<c0123712>] io_schedule+0x26/0x30
> > > [<c0192242>] direct_io_worker+0x376/0x5ab
> > > [<c019264a>] __blockdev_direct_IO+0x1d3/0x2d5
> > > [<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
> > > [<c01ad72d>] ext3_direct_IO+0xc0/0x1e1
> > > [<c01ac73e>] ext3_direct_io_get_blocks+0x0/0xbf
> > > [<c014840f>] generic_file_direct_IO+0x70/0x89
> > > [<c0145e11>] __generic_file_aio_read+0xfb/0x1ff
> > > [<c0259d3e>] write_chan+0x165/0x21e
> > > [<c0145f48>] generic_file_aio_read+0x33/0x37
> > > [<c0194ad3>] aio_pread+0x34/0x5f
> > > [<c0193bec>] aio_run_iocb+0xa6/0x1ed
> > > [<c019316f>] __aio_get_req+0x27/0x158
> > > [<c0194a9f>] aio_pread+0x0/0x5f
> > > [<c02532ab>] tty_write+0x1e8/0x3b2
> > > [<c0194f62>] io_submit_one+0x1ea/0x2b7
> > > [<c0195110>] sys_io_submit+0xe1/0x194
> > > [<c03c29a7>] syscall_call+0x7/0xb
> > > [<c03c007b>] rpc_depopulate+0x1aa/0x24b
> > >
> > >
> > >
> > > Daniel
> > >
> > > On Sun, 2003-11-16 at 21:25, Suparna Bhattacharya wrote:
> > > > On Thu, Nov 13, 2003 at 02:03:58PM -0800, Daniel McNeil wrote:
> > > > > Andrew,
> > > > >
> > > > > I'm testing test9-mm3 on a 2-proc Xeon with a ext3 file system.
> > > > > I tested using the test programs aiocp and aiodio_sparse.
> > > > > (see http://developer.osdl.org/daniel/AIO/)
> > > > >
> > > > > Using aiocp with i/o sizes from 1k to 512k to copy files worked
> > > > > without any errors or kernel debug messages.
> > > > >
> > > > > With 64k i/o, the aiodio_sparse program complete without any errors.
> > > > > There are no kernel error messages, so that is good.
> > > > >
> > > > > There are still problems with non power of 2 i/o sizes using AIO and
> > > > > O_DIRECT. It hangs with aio's that do not seem to complete. The test
> > > > > does exit when hitting ^c and there are no kernel messages. Test output
> > > > > below:
> > > >
> > > > Could you check if the following patch fixes the problem for you ?
> > > >
> > > > Regards
> > > > Suparna
> > > >
> > > > --------------------------------------------------------------
> > > >
> > > > With this patch, when the DIO code falls back to buffered i/o after
> > > > having submitted part of the i/o, then buffered i/o is issued only
> > > > for the remaining part of the request (i.e. the part not already
> > > > covered by DIO).
> > > >
> > > > diff -ur pure-mm3/fs/direct-io.c linux-2.6.0-test9-mm3/fs/direct-io.c
> > > > --- pure-mm3/fs/direct-io.c 2003-11-14 09:09:06.000000000 +0530
> > > > +++ linux-2.6.0-test9-mm3/fs/direct-io.c 2003-11-17 09:00:47.000000000 +0530
> > > > @@ -74,6 +74,7 @@
> > > > been performed at the start of a
> > > > write */
> > > > int pages_in_io; /* approximate total IO pages */
> > > > + size_t size; /* total request size (doesn't change)*/
> > > > sector_t block_in_file; /* Current offset into the underlying
> > > > file in dio_block units. */
> > > > unsigned blocks_available; /* At block_in_file. changes */
> > > > @@ -226,7 +227,7 @@
> > > > dio_complete(dio, dio->block_in_file << dio->blkbits,
> > > > dio->result);
> > > > /* Complete AIO later if falling back to buffered i/o */
> > > > - if (dio->result != -ENOTBLK) {
> > > > + if (dio->result >= dio->size || dio->rw == READ) {
> > > > aio_complete(dio->iocb, dio->result, 0);
> > > > kfree(dio);
> > > > } else {
> > > > @@ -889,6 +890,7 @@
> > > > dio->blkbits = blkbits;
> > > > dio->blkfactor = inode->i_blkbits - blkbits;
> > > > dio->start_zero_done = 0;
> > > > + dio->size = 0;
> > > > dio->block_in_file = offset >> blkbits;
> > > > dio->blocks_available = 0;
> > > > dio->cur_page = NULL;
> > > > @@ -925,7 +927,7 @@
> > > >
> > > > for (seg = 0; seg < nr_segs; seg++) {
> > > > user_addr = (unsigned long)iov[seg].iov_base;
> > > > - bytes = iov[seg].iov_len;
> > > > + dio->size += bytes = iov[seg].iov_len;
> > > >
> > > > /* Index into the first page of the first block */
> > > > dio->first_block_in_page = (user_addr & ~PAGE_MASK) >> blkbits;
> > > > @@ -956,6 +958,13 @@
> > > > }
> > > > } /* end iovec loop */
> > > >
> > > > + if (ret == -ENOTBLK && rw == WRITE) {
> > > > + /*
> > > > + * The remaining part of the request will be
> > > > + * be handled by buffered I/O when we return
> > > > + */
> > > > + ret = 0;
> > > > + }
> > > > /*
> > > > * There may be some unwritten disk at the end of a part-written
> > > > * fs-block-sized block. Go zero that now.
> > > > @@ -986,19 +995,13 @@
> > > > */
> > > > if (dio->is_async) {
> > > > if (ret == 0)
> > > > - ret = dio->result; /* Bytes written */
> > > > - if (ret == -ENOTBLK) {
> > > > - /*
> > > > - * The request will be reissued via buffered I/O
> > > > - * when we return; Any I/O already issued
> > > > - * effectively becomes redundant.
> > > > - */
> > > > - dio->result = ret;
> > > > + ret = dio->result;
> > > > + if (ret > 0 && dio->result < dio->size && rw == WRITE) {
> > > > dio->waiter = current;
> > > > }
> > > > finished_one_bio(dio); /* This can free the dio */
> > > > blk_run_queues();
> > > > - if (ret == -ENOTBLK) {
> > > > + if (dio->waiter) {
> > > > /*
> > > > * Wait for already issued I/O to drain out and
> > > > * release its references to user-space pages
> > > > @@ -1032,7 +1035,8 @@
> > > > }
> > > > dio_complete(dio, offset, ret);
> > > > /* We could have also come here on an AIO file extend */
> > > > - if (!is_sync_kiocb(iocb) && (ret != -ENOTBLK))
> > > > + if (!is_sync_kiocb(iocb) && !(rw == WRITE && ret >= 0 &&
> > > > + dio->result < dio->size))
> > > > aio_complete(iocb, ret, 0);
> > > > kfree(dio);
> > > > }
> > > > diff -ur pure-mm3/mm/filemap.c linux-2.6.0-test9-mm3/mm/filemap.c
> > > > --- pure-mm3/mm/filemap.c 2003-11-14 09:15:08.000000000 +0530
> > > > +++ linux-2.6.0-test9-mm3/mm/filemap.c 2003-11-15 11:11:16.000000000 +0530
> > > > @@ -1895,14 +1895,16 @@
> > > > */
> > > > if (written >= 0 && file->f_flags & O_SYNC)
> > > > status = generic_osync_inode(inode, mapping, OSYNC_METADATA);
> > > > - if (written >= 0 && !is_sync_kiocb(iocb))
> > > > + if (written >= count && !is_sync_kiocb(iocb))
> > > > written = -EIOCBQUEUED;
> > > > - if (written != -ENOTBLK)
> > > > + if (written < 0 || written >= count)
> > > > goto out_status;
> > > > /*
> > > > * direct-io write to a hole: fall through to buffered I/O
> > > > + * for completing the rest of the request.
> > > > */
> > > > - written = 0;
> > > > + pos += written;
> > > > + count -= written;
> > > > }
> > > >
> > > > buf = iov->iov_base;
> > >
> > > --
> > > To unsubscribe, send a message with 'unsubscribe linux-aio' in
> > > the body to majordomo@kvack.org. For more info on Linux AIO,
> > > see: http://www.kvack.org/aio/
> > > Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>
> >
> > --
> > To unsubscribe, send a message with 'unsubscribe linux-aio' in
> > the body to majordomo@kvack.org. For more info on Linux AIO,
> > see: http://www.kvack.org/aio/
> > Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.080 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site