lkml.org 
[lkml]   [2003]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectBUG: Kernel Panic: kernel-2.6.0-test9-bk21 for alpha in scsi context ll_rw_blk.c
    Hi

    I got a kernel panic on alpha platform with the kernel-2.6.0-test9-bk21
    (see below). Until 2.4.21 everything works fine. Config and lspci output
    attached.
    I don´t know, if the "Unaligned fault" comes from "I/O ports already in
    use, ignoring" before.

    Screen output:

    Linux version 2.6.0-test9-bk21 (root@merlin) (gcc version 3.3.2 (Red Hat
    Linux 3.3.2-1)) #1 Mon Nov 17 12:22:03 MET 2003
    Booting on EB164 variation SX164 using machine vector SX164 from MILO
    Major Options: EV56 LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ
    [..]
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    CY82C693: IDE controller at PCI slot 0000:00:08.1
    CY82C693: chipset revision 0
    CY82C693: not 100% native mode: will probe irqs later
    CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)
    ide0: BM-DMA at 0x8480-0x8487, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0x8488-0x848f, BIOS settings: hdc:pio, hdd:DMA
    hdb: ASUS CD-S340, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
    <Adaptec 2940 Ultra SCSI adapter>
    aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

    (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    (scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    (scsi0:A:2): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    (scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    Vendor: IBM Model: DDYS-T36950N Rev: SA2A
    Type: Direct-Access ANSI SCSI revision: 03
    scsi0:A:0:0: Tagged Queuing enabled. Depth 128
    Vendor: COMPAQ Model: BB00921B91 Rev: 3B07
    Type: Direct-Access ANSI SCSI revision: 02
    scsi0:A:1:0: Tagged Queuing enabled. Depth 128
    Vendor: IBM Model: DDYS-T18350N Rev: SA2A
    Type: Direct-Access ANSI SCSI revision: 03
    scsi0:A:2:0: Tagged Queuing enabled. Depth 128
    Vendor: IBM Model: DDYS-T18350N Rev: SA2A
    Type: Direct-Access ANSI SCSI revision: 03
    scsi0:A:3:0: Tagged Queuing enabled. Depth 128
    PCI: Unable to reserve I/O region #1:100@8000 for device 0000:00:07.0
    PCI: Unable to reserve I/O region #1:100@8000 for device 0000:00:07.0
    aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 0/7/0
    aic7xxx: I/O ports already in use, ignoring.
    SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
    SCSI device sda: drive cache: write back
    sda:Bad unaligned kernel access at fffffc0000476cb8: fffffc001fd48f22 22 31
    Kernel panic: Attempted to kill init!

    Disassembly of fffffc0000476cb8:

    0xfffffc0000476c78 <__make_request+88>: addq t0,t1,t0
    0xfffffc0000476c7c <__make_request+92>: ldq t12,-12528(gp)
    0xfffffc0000476c80 <__make_request+96>: ldl t1,8(t0)
    0xfffffc0000476c84 <__make_request+100>: lda a1,64(sp)
    0xfffffc0000476c88 <__make_request+104>: zapnot t3,0xf,t3
    0xfffffc0000476c8c <__make_request+108>: and t4,0x1,s1
    0xfffffc0000476c90 <__make_request+112>: zapnot t1,0xf,t1
    0xfffffc0000476c94 <__make_request+116>: stq t2,80(sp)
    0xfffffc0000476c98 <__make_request+120>: srl t3,0x9,s5
    0xfffffc0000476c9c <__make_request+124>: srl t1,0x9,fp
    0xfffffc0000476ca0 <__make_request+128>: jsr
    ra,(t12),0xfffffc000047aa70 <diskstats_show+592>
    0xfffffc0000476ca4 <__make_request+132>: ldah gp,35(ra)
    0xfffffc0000476ca8 <__make_request+136>: ldq t0,64(sp)
    0xfffffc0000476cac <__make_request+140>: ldq t2,632(s2)
    0xfffffc0000476cb0 <__make_request+144>: lda gp,-28324(gp)
    0xfffffc0000476cb4 <__make_request+148>: ldl t1,32(t0)
    -> 0xfffffc0000476cb8 <__make_request+152>: lds $f31,0(t2)
    0xfffffc0000476cbc <__make_request+156>: unop
    0xfffffc0000476cc0 <__make_request+160>: and t1,0x4,s0
    0xfffffc0000476cc4 <__make_request+164>: and t1,0x2,s4
    0xfffffc0000476cc8 <__make_request+168>: cmpult zero,s0,s0
    0xfffffc0000476ccc <__make_request+172>: unop
    0xfffffc0000476cd0 <__make_request+176>: lda a0,7
    ---Type <return> to continue, or q <return> to quit---
    0xfffffc0000476cd4 <__make_request+180>: call_pal 0x35
    0xfffffc0000476cd8 <__make_request+184>: ldq t12,-23576(gp)
    0xfffffc0000476cdc <__make_request+188>: mov s2,a0
    0xfffffc0000476ce0 <__make_request+192>: jsr
    ra,(t12),0xfffffc00004734d0 <elv_queue_empty>
    0xfffffc0000476ce4 <__make_request+196>: ldah gp,35(ra)

    In ./drivers/block/ll_rw_blk.c __make_request:2021
    2021 spin_lock_prefetch(q->queue_lock);
    2022
    2023 barrier = test_bit(BIO_RW_BARRIER, &bio->bi_rw);
    2024
    2025 ra = bio->bi_rw & (1 << BIO_RW_AHEAD);


    3338: 00 00 e3 8b lds $f31,0(t2)

    processor.h:94
    extern inline void spin_lock_prefetch(const void *ptr)
    {
    __builtin_prefetch(ptr, 1, 3);
    }

    So q->queue_lock isn´t aligned for alpha - or q isn´t valid.



    --
    Tom

    LINUX user since kernel 0.99.x 1994.
    RPM Alpha packages at http://alpha.steudten.com/packages
    Want to know what S.u.S.E 1995 cdrom-set contains?


    #
    # Automatically generated make config: don't edit
    #
    CONFIG_ALPHA=y
    CONFIG_64BIT=y
    CONFIG_MMU=y
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    # CONFIG_CLEAN_COMPILE is not set
    CONFIG_STANDALONE=y
    CONFIG_BROKEN=y
    CONFIG_BROKEN_ON_SMP=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_SYSCTL=y
    CONFIG_LOG_BUF_SHIFT=17
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    CONFIG_MODVERSIONS=y
    CONFIG_KMOD=y

    #
    # System setup
    #
    # CONFIG_ALPHA_GENERIC is not set
    # CONFIG_ALPHA_ALCOR is not set
    # CONFIG_ALPHA_XL is not set
    # CONFIG_ALPHA_BOOK1 is not set
    # CONFIG_ALPHA_AVANTI_CH is not set
    # CONFIG_ALPHA_CABRIOLET is not set
    # CONFIG_ALPHA_DP264 is not set
    # CONFIG_ALPHA_EB164 is not set
    # CONFIG_ALPHA_EB64P_CH is not set
    # CONFIG_ALPHA_EB66 is not set
    # CONFIG_ALPHA_EB66P is not set
    # CONFIG_ALPHA_EIGER is not set
    # CONFIG_ALPHA_JENSEN is not set
    # CONFIG_ALPHA_LX164 is not set
    # CONFIG_ALPHA_LYNX is not set
    # CONFIG_ALPHA_MARVEL is not set
    # CONFIG_ALPHA_MIATA is not set
    # CONFIG_ALPHA_MIKASA is not set
    # CONFIG_ALPHA_NAUTILUS is not set
    # CONFIG_ALPHA_NONAME_CH is not set
    # CONFIG_ALPHA_NORITAKE is not set
    # CONFIG_ALPHA_PC164 is not set
    # CONFIG_ALPHA_P2K is not set
    # CONFIG_ALPHA_RAWHIDE is not set
    # CONFIG_ALPHA_RUFFIAN is not set
    # CONFIG_ALPHA_RX164 is not set
    CONFIG_ALPHA_SX164=y
    # CONFIG_ALPHA_SABLE is not set
    # CONFIG_ALPHA_SHARK is not set
    # CONFIG_ALPHA_TAKARA is not set
    # CONFIG_ALPHA_TITAN is not set
    # CONFIG_ALPHA_WILDFIRE is not set
    CONFIG_ISA=y
    CONFIG_PCI=y
    CONFIG_PCI_DOMAINS=y
    CONFIG_ALPHA_EV5=y
    CONFIG_ALPHA_CIA=y
    CONFIG_ALPHA_EV56=y
    CONFIG_ALPHA_PYXIS=y
    # CONFIG_ALPHA_SRM is not set
    # CONFIG_DISCONTIGMEM is not set
    CONFIG_VERBOSE_MCHECK=y
    CONFIG_VERBOSE_MCHECK_ON=2
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    # CONFIG_HOTPLUG is not set
    # CONFIG_SRM_ENV is not set
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_AOUT is not set
    CONFIG_BINFMT_EM86=m
    # CONFIG_BINFMT_MISC is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_PC_CML1=m
    # CONFIG_PARPORT_SERIAL is not set
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Generic Driver Options
    #

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    # CONFIG_PNPBIOS is not set

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=m
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=y
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_SIZE=4096
    # CONFIG_BLK_DEV_INITRD is not set

    #
    # Multi-device support (RAID and LVM)
    #
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_LINEAR=y
    CONFIG_MD_RAID0=y
    CONFIG_MD_RAID1=y
    CONFIG_MD_RAID5=y
    # CONFIG_MD_MULTIPATH is not set
    # CONFIG_BLK_DEV_DM is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_IDE_MAX_HWIFS=4
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    # CONFIG_IDEDISK_STROKE is not set
    CONFIG_BLK_DEV_IDECD=m
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    CONFIG_IDE_TASK_IOCTL=y
    # CONFIG_IDE_TASKFILE_IO is not set

    #
    # IDE chipset support/bugfixes
    #
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    CONFIG_IDEDMA_PCI_WIP=y
    # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
    CONFIG_BLK_DEV_ADMA=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    CONFIG_BLK_DEV_ALI15X3=y
    # CONFIG_WDC_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    CONFIG_BLK_DEV_CY82C693=y
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_DMA_NONPCI is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    CONFIG_CHR_DEV_ST=m
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    CONFIG_SCSI_REPORT_LUNS=y
    CONFIG_SCSI_CONSTANTS=y
    CONFIG_SCSI_LOGGING=y

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    CONFIG_SCSI_AIC7XXX=y
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=128
    CONFIG_AIC7XXX_RESET_DELAY_MS=2000
    # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
    # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
    CONFIG_AIC7XXX_DEBUG_ENABLE=y
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    CONFIG_SCSI_AIC7XXX_OLD=y
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_MEGARAID is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_CPQFCTS is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PCI2000 is not set
    # CONFIG_SCSI_PCI2220I is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_NSP32 is not set
    CONFIG_SCSI_DEBUG=m

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set

    #
    # IEEE 1394 (FireWire) support (EXPERIMENTAL)
    #
    # CONFIG_IEEE1394 is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_NETLINK_DEV=y
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_IP_MULTIPLE_TABLES=y
    # CONFIG_IP_ROUTE_FWMARK is not set
    CONFIG_IP_ROUTE_NAT=y
    # CONFIG_IP_ROUTE_MULTIPATH is not set
    CONFIG_IP_ROUTE_TOS=y
    CONFIG_IP_ROUTE_VERBOSE=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    CONFIG_INET_ECN=y
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=y
    CONFIG_INET_ESP=y
    CONFIG_INET_IPCOMP=y

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    # CONFIG_DECNET is not set
    # CONFIG_BRIDGE is not set
    CONFIG_NETFILTER=y
    CONFIG_NETFILTER_DEBUG=y

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=m
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    # CONFIG_IP_NF_TFTP is not set
    # CONFIG_IP_NF_AMANDA is not set
    # CONFIG_IP_NF_QUEUE is not set
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_LIMIT=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_MAC=m
    CONFIG_IP_NF_MATCH_PKTTYPE=m
    CONFIG_IP_NF_MATCH_MARK=m
    CONFIG_IP_NF_MATCH_MULTIPORT=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_DSCP=m
    CONFIG_IP_NF_MATCH_AH_ESP=m
    CONFIG_IP_NF_MATCH_LENGTH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_TCPMSS=m
    # CONFIG_IP_NF_MATCH_HELPER is not set
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    # CONFIG_IP_NF_TARGET_NETMAP is not set
    # CONFIG_IP_NF_TARGET_SAME is not set
    # CONFIG_IP_NF_NAT_LOCAL is not set
    # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    # CONFIG_IP_NF_TARGET_ECN is not set
    # CONFIG_IP_NF_TARGET_DSCP is not set
    CONFIG_IP_NF_TARGET_MARK=m
    # CONFIG_IP_NF_TARGET_CLASSIFY is not set
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    # CONFIG_IP_NF_TARGET_TCPMSS is not set
    # CONFIG_IP_NF_ARPTABLES is not set
    CONFIG_IP_NF_COMPAT_IPCHAINS=m
    # CONFIG_IP_NF_COMPAT_IPFWADM is not set
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    CONFIG_IPV6_SCTP__=y
    # CONFIG_IP_SCTP is not set
    # CONFIG_ATM is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_FASTROUTE is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    CONFIG_NET_SCHED=y
    # CONFIG_NET_SCH_CBQ is not set
    # CONFIG_NET_SCH_HTB is not set
    # CONFIG_NET_SCH_CSZ is not set
    # CONFIG_NET_SCH_PRIO is not set
    # CONFIG_NET_SCH_RED is not set
    # CONFIG_NET_SCH_SFQ is not set
    # CONFIG_NET_SCH_TEQL is not set
    # CONFIG_NET_SCH_TBF is not set
    # CONFIG_NET_SCH_GRED is not set
    # CONFIG_NET_SCH_DSMARK is not set
    # CONFIG_NET_SCH_INGRESS is not set
    CONFIG_NET_QOS=y
    CONFIG_NET_ESTIMATOR=y
    # CONFIG_NET_CLS is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    CONFIG_NETDEVICES=y

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    CONFIG_BONDING=m
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_ETHERTAP is not set
    # CONFIG_NET_SB1000 is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    # CONFIG_MII is not set
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    CONFIG_NET_VENDOR_3COM=y
    # CONFIG_EL1 is not set
    # CONFIG_EL2 is not set
    # CONFIG_ELPLUS is not set
    # CONFIG_EL16 is not set
    CONFIG_EL3=y
    # CONFIG_3C515 is not set
    CONFIG_VORTEX=y
    # CONFIG_TYPHOON is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_ISA=y
    # CONFIG_E2100 is not set
    # CONFIG_EWRK3 is not set
    # CONFIG_EEXPRESS is not set
    # CONFIG_EEXPRESS_PRO is not set
    # CONFIG_HPLAN_PLUS is not set
    # CONFIG_HPLAN is not set
    # CONFIG_LP486E is not set
    # CONFIG_ETH16I is not set
    CONFIG_NE2000=m
    # CONFIG_ZNET is not set
    # CONFIG_SEEQ8005 is not set
    # CONFIG_NET_PCI is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    CONFIG_PPP=m
    # CONFIG_PPP_MULTILINK is not set
    # CONFIG_PPP_FILTER is not set
    # CONFIG_PPP_ASYNC is not set
    # CONFIG_PPP_SYNC_TTY is not set
    # CONFIG_PPP_DEFLATE is not set
    # CONFIG_PPP_BSDCOMP is not set
    # CONFIG_PPPOE is not set
    # CONFIG_SLIP is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # IrDA (infrared) support
    #
    # CONFIG_IRDA is not set

    #
    # Bluetooth support
    #
    # CONFIG_BT is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN_BOOL is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=y
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_PS2_SYNAPTICS is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_UNIX98_PTY_COUNT=256
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    CONFIG_TIPAR=m

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # I2C Algorithms
    #

    #
    # I2C Hardware Bus support
    #

    #
    # I2C Hardware Sensors Chip support
    #
    # CONFIG_I2C_SENSOR is not set

    #
    # Mice
    #
    # CONFIG_BUSMOUSE is not set
    # CONFIG_QIC02_TAPE is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set
    CONFIG_SOFT_WATCHDOG=m
    # CONFIG_WDT is not set
    # CONFIG_WDTPCI is not set
    # CONFIG_PCWATCHDOG is not set
    # CONFIG_ACQUIRE_WDT is not set
    # CONFIG_ADVANTECH_WDT is not set
    # CONFIG_EUROTECH_WDT is not set
    # CONFIG_IB700_WDT is not set
    # CONFIG_I810_TCO is not set
    # CONFIG_MIXCOMWD is not set
    # CONFIG_SCx200_WDT is not set
    # CONFIG_60XX_WDT is not set
    # CONFIG_W83877F_WDT is not set
    # CONFIG_MACHZ_WDT is not set
    # CONFIG_SC520_WDT is not set
    # CONFIG_AMD7XX_TCO is not set
    # CONFIG_ALIM7101_WDT is not set
    # CONFIG_ALIM1535_WDT is not set
    # CONFIG_SC1200_WDT is not set
    # CONFIG_WAFER_WDT is not set
    # CONFIG_CPU5_WDT is not set
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    # CONFIG_AGP is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_GAMMA is not set
    # CONFIG_DRM_R128 is not set
    # CONFIG_DRM_RADEON is not set
    # CONFIG_RAW_DRIVER is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    CONFIG_JBD_DEBUG=y
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=m
    # CONFIG_REISERFS_CHECK is not set
    CONFIG_REISERFS_PROC_INFO=y
    CONFIG_JFS_FS=y
    CONFIG_JFS_POSIX_ACL=y
    CONFIG_JFS_DEBUG=y
    CONFIG_JFS_STATISTICS=y
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    CONFIG_MINIX_FS=m
    CONFIG_ROMFS_FS=m
    CONFIG_QUOTA=y
    # CONFIG_QFMT_V1 is not set
    CONFIG_QFMT_V2=m
    CONFIG_QUOTACTL=y
    CONFIG_AUTOFS_FS=m
    CONFIG_AUTOFS4_FS=m

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=m
    CONFIG_UDF_FS=m

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_NTFS_FS=m
    CONFIG_NTFS_DEBUG=y
    # CONFIG_NTFS_RW is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    # CONFIG_DEVFS_FS is not set
    CONFIG_DEVPTS_FS=y
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    CONFIG_EFS_FS=m
    CONFIG_CRAMFS=m
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    CONFIG_UFS_FS=m
    CONFIG_UFS_FS_WRITE=y

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=m
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V4 is not set
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_SUNRPC=m
    # CONFIG_SUNRPC_GSS is not set
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    CONFIG_CIFS=m
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_INTERMEZZO_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_OSF_PARTITION=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_SMB_NLS=y
    CONFIG_NLS=y

    #
    # Native Language Support
    #
    CONFIG_NLS_DEFAULT="cp437"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=m
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set

    #
    # Graphics support
    #
    # CONFIG_FB is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # USB support
    #
    # CONFIG_USB is not set
    # CONFIG_USB_GADGET is not set

    #
    # Profiling support
    #
    CONFIG_PROFILING=y
    CONFIG_OPROFILE=m

    #
    # Kernel hacking
    #
    CONFIG_ALPHA_LEGACY_START_ADDRESS=y
    CONFIG_DEBUG_KERNEL=y
    CONFIG_MATHEMU=y
    CONFIG_DEBUG_SLAB=y
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_RWLOCK is not set
    # CONFIG_DEBUG_SEMAPHORE is not set
    # CONFIG_DEBUG_INFO is not set

    #
    # Security options
    #
    CONFIG_SECURITY=y
    # CONFIG_SECURITY_NETWORK is not set
    CONFIG_SECURITY_CAPABILITIES=m
    # CONFIG_SECURITY_SELINUX is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=y
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_DES=y
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_DEFLATE=y
    CONFIG_CRYPTO_TEST=m

    #
    # Library routines
    #
    CONFIG_CRC32=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
    00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
    00:08.0 ISA bridge: Contaq Microsystems 82c693
    00:08.1 IDE interface: Contaq Microsystems 82c693
    00:08.2 IDE interface: Contaq Microsystems 82c693
    00:08.3 USB Controller: Contaq Microsystems 82c693
    00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
    00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01) (prog-if 00 [VGA])
    Subsystem: Diamond Multimedia Systems FIRE GL 1000 PRO
    Flags: bus master, medium devsel, latency 32, IRQ 25
    Memory at 000000000a000000 (32-bit, non-prefetchable) [size=128K]
    Memory at 0000000009000000 (32-bit, non-prefetchable) [size=8M]
    Memory at 0000000009800000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at 000000000a040000 [disabled] [size=64K]

    00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
    Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
    Flags: bus master, medium devsel, latency 32, IRQ 26
    I/O ports at 8000 [size=256]
    Memory at 000000000a060000 (32-bit, non-prefetchable) [disabled] [size=4K]
    Expansion ROM at 000000000a050000 [disabled] [size=64K]
    Capabilities: [dc] Power Management version 1

    00:08.0 ISA bridge: Contaq Microsystems 82c693
    Flags: bus master, medium devsel, latency 0

    00:08.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master])
    Flags: bus master, medium devsel, latency 0
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=4]
    I/O ports at 8480 [size=16]

    00:08.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [])
    Flags: bus master, medium devsel, latency 0
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=4]

    00:08.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI])
    Flags: bus master, medium devsel, latency 32
    Memory at 000000000a061000 (32-bit, non-prefetchable) [size=4K]

    00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
    Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
    Flags: bus master, medium devsel, latency 32, IRQ 24
    I/O ports at 8400 [size=128]
    Memory at 000000000a062000 (32-bit, non-prefetchable) [size=128]
    Expansion ROM at 000000000a020000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 1

    00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01) (prog-if 00 [VGA])
    Subsystem: Diamond Multimedia Systems FIRE GL 1000 PRO
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (48000ns min, 48000ns max)
    Interrupt: pin A routed to IRQ 25
    Region 0: Memory at 000000000a000000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at 0000000009000000 (32-bit, non-prefetchable) [size=8M]
    Region 2: Memory at 0000000009800000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at 000000000a040000 [disabled] [size=64K]

    00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
    Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min, 2000ns max), cache line size 08
    Interrupt: pin A routed to IRQ 26
    Region 0: I/O ports at 8000 [size=256]
    Region 1: Memory at 000000000a060000 (32-bit, non-prefetchable) [disabled] [size=4K]
    Expansion ROM at 000000000a050000 [disabled] [size=64K]
    Capabilities: [dc] Power Management version 1
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:08.0 ISA bridge: Contaq Microsystems 82c693
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

    00:08.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 0
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=4]
    Region 4: I/O ports at 8480 [size=16]

    00:08.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 0
    Region 0: I/O ports at 0170 [size=8]
    Region 1: I/O ports at 0374 [size=4]

    00:08.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, cache line size 08
    Interrupt: pin A routed to IRQ 0
    Region 0: Memory at 000000000a061000 (32-bit, non-prefetchable) [size=4K]

    00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
    Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 24
    Region 0: I/O ports at 8400 [size=128]
    Region 1: Memory at 000000000a062000 (32-bit, non-prefetchable) [size=128]
    Expansion ROM at 000000000a020000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 1
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    \
     
     \ /
      Last update: 2005-03-22 13:58    [W:0.091 / U:32.048 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site