lkml.org 
[lkml]   [2003]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Megaraid does not work with 2.4.22
Marcelo Tosatti wrote:

> Fine. I agree on adding in to mainline 2.4.x.

Here go some trivial fixes(add menu entry, list all compatibles
boards in help and put tab instead spaces) for megaraid2.

-thanks-
--
If it wasn't for the presence of Lara Croft and Xena Warrior Princess,
techies around the world would have posters of Torvalds on their walls.

diff -Nuar old/Documentation/Configure.help new/Documentation/Configure.help
--- old/Documentation/Configure.help Tue Oct 7 19:11:27 2003
+++ new/Documentation/Configure.help Tue Oct 7 19:30:00 2003
@@ -9051,9 +9051,11 @@

AMI MegaRAID support (old driver)
CONFIG_SCSI_MEGARAID
- This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
- and 467 SCSI host adapters. This is the old and very heavily tested
- driver but lacks features like clustering.
+ This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490,
+ 467, 471 and 493 SCSI host adapters.
+
+ This is the old and very heavily tested driver but lacks features
+ like clustering.

If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
@@ -9062,14 +9064,15 @@

AMI MegaRAID support (new driver)
CONFIG_SCSI_MEGARAID2
-This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
-and 467 SCSI host adapters. This is the newer less tested but more
-featureful driver.
-
-If you want to compile this driver as a module ( = code which can be
-inserted in and removed from the running kernel whenever you want),
-say M here and read <file:Documentation/modules.txt>. The module
-will be called megaraid2.o.
+ This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490,
+ 467, 471, 493 and new Ultra320(518, 520, 531, 532) SCSI host adapters.
+
+ This is the newer less tested but more featureful driver.
+
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called megaraid2.o.

Intel/ICP (former GDT SCSI Disk Array) RAID Controller support
CONFIG_SCSI_GDTH
diff -Nuar old/drivers/scsi/Config.in new/drivers/scsi/Config.in
--- old/drivers/scsi/Config.in Tue Oct 7 19:10:54 2003
+++ new/drivers/scsi/Config.in Tue Oct 7 19:21:28 2003
@@ -67,6 +67,7 @@
dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI $CONFIG_PCI
dep_tristate 'AMI MegaRAID support' CONFIG_SCSI_MEGARAID $CONFIG_SCSI
+dep_tristate 'AMI MegaRAID2 support' CONFIG_SCSI_MEGARAID2 $CONFIG_SCSI

dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then
diff -Nuar old/drivers/scsi/Makefile new/drivers/scsi/Makefile
--- old/drivers/scsi/Makefile Tue Oct 7 19:10:49 2003
+++ new/drivers/scsi/Makefile Tue Oct 7 19:21:41 2003
@@ -110,7 +110,7 @@
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
obj-$(CONFIG_SCSI_AM53C974) += AM53C974.o
obj-$(CONFIG_SCSI_MEGARAID) += megaraid.o
-obj-$(CONFIG_SCSI_MEGARAID2) += megaraid2.o
+obj-$(CONFIG_SCSI_MEGARAID2) += megaraid2.o
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp.o
obj-$(CONFIG_SCSI_GDTH) += gdth.o
\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.090 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site