lkml.org 
[lkml]   [2003]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.23pre6aa2 - some problems [with patches]
Andrea Arcangeli wrote:
>
> On Sun, Oct 05, 2003 at 01:38:20AM +1000, Eyal Lebedinsky wrote:
> > This is most unusual as -aa patches usually apply clean, but I am
> > encountering a number of build problems.
> >
> > "PCMCIA SCSI adapter support" build is broken. I deselected the whole
> > section.
>
> can you double check you can reproduce it in 2.4.23pre6 vanilla? It
> doesn't seem introduced by my patches.

I am reasonably sure that vanilla -pre6 built without any complaint.

> > And building i2c-2.7.0 (which I need for sensors) is failing.
> >
> > depmod: *** Unresolved symbols in
> > /lib/modules/2.4.23-pre6-aa2/kernel/drivers/ie
> > ee1394/pcilynx.o
> > depmod: i2c_bit_add_bus_Rca543f36
> > depmod: i2c_transfer_R1dea91d1
> > depmod: i2c_bit_del_bus_Rdf920b11
> > depmod: *** Unresolved symbols in
> > /lib/modules/2.4.23-pre6-aa2/kernel/drivers/me
> > dia/video/bttv.o
> > depmod: i2c_bit_add_bus_Rca543f36
> > depmod: i2c_master_recv_R67b29cc4
> > depmod: i2c_bit_del_bus_Rdf920b11
> > depmod: i2c_master_send_Rb692cb0e
> > depmod: *** Unresolved symbols in
> > /lib/modules/2.4.23-pre6-aa2/kernel/drivers/me
> > dia/video/msp3400.o
> > depmod: i2c_probe_R4e2acbec
> > depmod: i2c_add_driver_Racf22304
> > depmod: i2c_transfer_R1dea91d1
> > depmod: i2c_attach_client_Ra861362d
> > depmod: i2c_master_send_Rb692cb0e
> > depmod: i2c_detach_client_R0cfb40b4
> > depmod: i2c_del_driver_R57837012
> > .... more following, all in kernel/drivers/media/video/* ...
>
> this looks like if you didn't compile the needed i2c (or maybe it was
> due the lack of a `make dep` first), the above modules (pcilynx bttv
> msp3400) looks innocent.

I have a script that goes into the i2c-2.7.0 tree and builds it. This
worked just fine with vanilla -pre6 (and older ones for a long time
now) but fails with -pre6-aa2.


Nevertheless, I am now building vanilla -pre6 just to confirm the
above claims... built just fine. Retry -aa2... failed.

Here is the diff in .config between my vanilla -pre6 and -aa2

@@ -44,8 +44,7 @@
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_CMPXCHG8=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
@@ -56,6 +55,7 @@
CONFIG_X86_MCE=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
+CONFIG_THINKPAD=m
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
@@ -63,6 +63,11 @@
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_1GB=y
+# CONFIG_2GB is not set
+# CONFIG_3GB is not set
+# CONFIG_05GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
@@ -105,6 +110,8 @@
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
+CONFIG_MAX_USER_RT_PRIO=100
+CONFIG_MAX_RT_PRIO=0
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
@@ -316,6 +323,7 @@
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_LVM=m
+CONFIG_BLK_DEV_DM=m

#
# Networking options
@@ -328,6 +336,10 @@
CONFIG_FILTER=y
CONFIG_UNIX=m
CONFIG_INET=y
+CONFIG_TUX=m
+CONFIG_TUX_EXTCGI=y
+# CONFIG_TUX_EXTENDED_LOG is not set
+# CONFIG_TUX_DEBUG is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
@@ -715,6 +727,10 @@
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLOGIC_QLA2XXX=y
+CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2100=m
+CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2200=m
+CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2300=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
@@ -731,11 +747,7 @@
#
# PCMCIA SCSI adapter support
#
-CONFIG_SCSI_PCMCIA=y
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
+# CONFIG_SCSI_PCMCIA is not set

#
# Fusion MPT device support
@@ -909,6 +921,7 @@
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
+CONFIG_NETCONSOLE=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
@@ -1479,6 +1492,7 @@
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_ATI is not set
+CONFIG_ECC=m

#
# Direct Rendering Manager (XFree86 DRI support)
@@ -1619,6 +1633,13 @@
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_DMAPI is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_PAGEBUF_DEBUG is not set

#
# Network File Systems
@@ -2061,3 +2082,4 @@
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_FW_LOADER=m
+CONFIG_QSORT=m


--
Eyal Lebedinsky (eyal@eyal.emu.id.au) <http://samba.org/eyal/>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.079 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site