Messages in this thread Patch in this message | | | Date | Wed, 29 Oct 2003 19:47:58 +0100 | From | Stefan Traby <> | Subject | Re: ACPI && vortex still broken in latest 2.4 and 2.6.0-test9 |
| |
On Wed, Oct 29, 2003 at 06:32:22PM +0300, Yaroslav Rastrigin wrote: > On Wednesday 29 October 2003 17:03, Matthias Andree wrote: > > > Affected are at least > > > IBM Thinkpad T21 http://lkml.org/lkml/2003/6/15/111 > > > IBM Thinkpad A21p (3c556B Laptop Hurricane) > > > > Might the problems you observe be related to the IBM BIOS? > Yes. With IBM's DSDT, to be more specific. I've filed a bug in the bugzilla,
Well, I could try a Dell BIOS on my A21p if buying a SCO-Linux license doesn't fix the problem. :)
http://www.hello-penguin.com/thinkpad/ contains more info including a dump of /proc/acpi/dsdt if somebody cares (to acpi_blacklist it).
Maybe this is interesting: It's a diff of lspci -vvvvvvvvv without and with acpi enabled...
--- lspci-noacpi 2003-10-29 19:20:00.000000000 +0100 +++ lspci-acpi 2003-10-29 19:21:42.000000000 +0100 @@ -49,13 +49,13 @@ 00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus (rev 20) Subsystem: 3Com Corporation: Unknown device 6356 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- - Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes) + Latency: 64 (2500ns min, 2500ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 1800 [size=256] - Region 1: Memory at f0101400 (32-bit, non-prefetchable) [size=128] - Region 2: Memory at f0101000 (32-bit, non-prefetchable) [size=128] + Region 1: [virtual] Memory at f0101400 (32-bit, non-prefetchable) [size=128] + Region 2: [virtual] Memory at f0101000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) --
ciao - Stefan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |