Messages in this thread | | | From | bd <> | Subject | 2.6.0-test8: 'sleeping function called from invalid context at include/asm/semaphore.h: 119' at boot | Date | Tue, 21 Oct 2003 20:08:22 -0400 |
| |
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
When I boot 2.6.0-test8, it sends the following to dmesg: Debug: sleeping function called from invalid context at include/asm/semaphore.h: 119 in_atomic():1, irqs_disabled():1 Call Trace: [<c011a386>] __might_sleep+0xa0/0xc2 [<c011cdd7>] acquire_console_sem+0x3a/0x59 [<c011d00c>] register_console+0x9f/0x1ca [<c02c9327>] vgacon_save_screen+0x0/0x68 [<c04b5cb3>] con_init+0x1f4/0x241 [<c0105000>] _stext+0x0/0x61 [<c04b50c3>] console_init+0x33/0x40 [<c04a462b>] start_kernel+0xbe/0x15d [<c04a443f>] unknown_bootoption+0x0/0xfa
Full dmesg: Linux version 2.6.0-test8 (root@bd-home-comp.no-ip.org) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #2 Tue Oct 21 19:25:03 EDT 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 00000000000ec000 (ACPI NVS) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017f00000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98048 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 93952 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000e8010 ACPI: RSDT (v001 COMPAQ CARS6C31 0x00000001 0x00000000) @ 0x000e8080 ACPI: FADT (v001 COMPAQ CARS6C31 0x00000001 0x00000000) @ 0x000e80cc ACPI: SSDT (v001 COMPAQ CARS6C3 0x00000001 MSFT 0x01000007) @ 0x000e8187 ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x01000007) @ 0x00000000 Building zonelist for node : 0 Kernel command line: ro root=/dev/hdb3 hdc=ide-scsi ide_setup: hdc=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 797.771 MHz processor. Console: colour VGA+ 80x25 Debug: sleeping function called from invalid context at include/asm/semaphore.h:119 in_atomic():1, irqs_disabled():1 Call Trace: [<c011a386>] __might_sleep+0xa0/0xc2 [<c011cdd7>] acquire_console_sem+0x3a/0x59 [<c011d00c>] register_console+0x9f/0x1ca [<c02c9327>] vgacon_save_screen+0x0/0x68 [<c04b5cb3>] con_init+0x1f4/0x241 [<c0105000>] _stext+0x0/0x61 [<c04b50c3>] console_init+0x33/0x40 [<c04a462b>] start_kernel+0xbe/0x15d [<c04a443f>] unknown_bootoption+0x0/0xfa
Memory: 383240k/392192k available (2737k kernel code, 8188k reserved, 982k data, 152k init, 0k highmem) Calibrating delay loop... 1576.96 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 797.0481 MHz. ..... host bus clock speed is 99.0685 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfa134, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i810 E Chipset. agpgart: Maximum main memory to use for agp memory: 321M agpgart: AGP aperture is 64M @ 0x44000000 [drm] Initialized i810 1.4.0 20030605 on minor 0 [drm] Initialized i830 1.3.2 20021108 on minor 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Enabling device 0000:01:0a.0 (0000 -> 0001) Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Enabling device 0000:01:08.0 (0004 -> 0007) eth0: ADMtek Comet rev 17 at 0xd88a4000, 00:03:6D:11:10:9E, IRQ 3. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller at PCI slot 0000:00:1f.1 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLlct20 20, ATA DISK drive hdb: Maxtor 6E040L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdb: max request size: 128KiB hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66) /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-32123S Rev: XS0K Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 16x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0000eec0 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_conntrack version 2.1 (3064 buckets, 24512 max) - 160 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 found reiserfs format "3.6" with standard journal hub 1-0:1.0: new USB device on port 1, assigned address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected Reiserfs journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hdb3) for (hdb3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 152k freed hub 1-1:1.0: new USB device on port 3, assigned address 3 drivers/usb/input/hid-core.c: ctrl urb status -32 received input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:1f.2-1.3 Adding 1005440k swap on /dev/hdb1. Priority:0 extents:1 Adding 529192k swap on /dev/hda2. Priority:0 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hdb2) for (hdb2) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names Disabled Privacy Extensions on device c0459a00(lo) process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT process `named' is using obsolete setsockopt SO_BSDCOMPAT eth0: no IPv6 routers present blk: queue d7bf8e00, I/O limit 4095Mb (mask 0xffffffff) blk: queue d7bf8a00, I/O limit 4095Mb (mask 0xffffffff) spurious 8259A interrupt: IRQ7. snd_maestro3: Unknown parameter `snd-pcm-oss' kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode.
The system runs fine once it finishes booting, however, except that 'xosview' hangs at startup and must be killed. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/lcp5x533NjVSos4RAluzAJ93bdgsxqDQNvGD83oOs+LON5JamACfQ7Wm HzuRqTMomv8i2+h0M6xytU8= =5HUl -----END PGP SIGNATURE-----
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |