Messages in this thread | | | Date | Thu, 02 Oct 2003 14:52:31 -0700 | From | Erik Steffl <> | Subject | Re: Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22) |
| |
Martin List-Petersen wrote: > I've got trouble with both 2.4.22-ac1, ac4 and 2.4.22-bk25 + newest sata > patch. (Debian Sid) > > When i try to boot ac1 or ac4 from harddisk. The kernel would fail by > endless stating: > kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8 > on screen. > > Do i boot the same kernel from floppy or cd (syslinux/isolinux - dmesg for ac4 attached, bootet from cd) it boots without trouble, > mounts the harddisk etc. > > The machine is a Dell Dimension 8300 (practically the same as the Precision 360), with Intel 875 chipset (ICH5 SATA controllers). > In bk25+sata patch reiserfs seems to be broken (dmesg attached), i will try an older version tomorrow. > > I simply can't figure out, whats wrong here.
I have intel D865PERL mb (close but not same as you have, I think they have the same sata controller), I used the 2.4.21-ac4 kernel, with SCSI_ATA enabled (otherwise system freezes right after it detects HDs). I also had to use libata5 patches from Jeff Garzik to be able to use drive >137GB (not sure whether libata5 are in one of the more recent kernels or ac patches).
erik
> > Regards, > Martin List-Petersen > martin at list-petersen dot se > -- > Microsoft DNS service terminates abnormally when it recieves a response > to a DNS query that was never made. Fix Information: Run your DNS > service on a different platform. > -- BugTraq > > > ------------------------------------------------------------------------ > > Linux version 2.4.22-bk25-20031002-odin (root@odin) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 SMP tor okt 2 21:53:33 CEST 2003 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ff74000 (usable) > BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS) > BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data) > BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) > BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 127MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000fe710 > hm, page 000fe000 reserved twice. > hm, page 000ff000 reserved twice. > hm, page 000f0000 reserved twice. > On node 0 totalpages: 262004 > zone(0): 4096 pages. > zone(1): 225280 pages. > zone(2): 32628 pages. > ACPI: RSDP (v000 DELL ) @ 0x000feb90 > ACPI: RSDT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1ca > ACPI: FADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1fe > ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc8937 > ACPI: MADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd272 > ACPI: BOOT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd2de > ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) > ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) > IOAPIC[0]: Assigned apic_id 2 > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 > ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) > ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) > Using ACPI (MADT) for SMP configuration information > Kernel command line: root=/dev/sda2 ro console=tty0 console=ttyS0,9600n8 BOOT_IMAGE=linux.bin > Initializing CPU#0 > Detected 2992.564 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 5976.88 BogoMIPS > Memory: 1031936k/1048016k available (1977k kernel code, 15696k reserved, 655k data, 132k init, 130512k highmem) > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode cache hash table entries: 65536 (order: 7, 524288 bytes) > Mount cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) > Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Physical Processor ID: 0 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > mtrr: detected mtrr type: Intel > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Physical Processor ID: 0 > Intel machine check reporting enabled on CPU#0. > CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 > per-CPU timeslice cutoff: 1462.91 usecs. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000040 > ESR value after enabling vector: 00000000 > Booting processor 1/1 eip 3000 > Initializing CPU#1 > masked ExtINT on CPU#1 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Calibrating delay loop... 5976.88 BogoMIPS > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Physical Processor ID: 0 > Intel machine check reporting enabled on CPU#1. > CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 > Total of 2 processors activated (11953.76 BogoMIPS). > cpu_sibling_map[0] = 1 > cpu_sibling_map[1] = 0 > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 pin1=2 pin2=0 > testing the IO APIC....................... > > .................................... done. > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 2992.4180 MHz. > ..... host bus clock speed is 199.4944 MHz. > cpu: 0, clocks: 1994944, slice: 664981 > CPU0<T0:1994944,T1:1329952,D:11,S:664981,C:1994944> > cpu: 1, clocks: 1994944, slice: 664981 > CPU1<T0:1994944,T1:664976,D:6,S:664981,C:1994944> > checking TSC synchronization across CPUs: passed. > Waiting on wait_init_idle (map = 0x2) > All processors have done init_idle > ACPI: Subsystem revision 20030916 > PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 > PCI: Using configuration type 1 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 > Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) > PCI: Probing PCI hardware > PCI: Using ACPI for IRQ routing > PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com> > Starting kswapd > allocated 32 pages and 32 bhs reserved for the highmem bounces > VFS: Disk quotas vdquot_6.5.1 > Journalled Block Device driver loaded > devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) > devfs: boot_options: 0x0 > ACPI: Processor [CPU0] (supports C1) > ACPI: Processor [CPU1] (supports C1) > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > Intel(R) PRO/100 Network Driver - version 2.3.18-k1 > Copyright (c) 2003 Intel Corporation > > e100: eth0: Intel(R) PRO/100 Network Connection > Hardware receive checksums enabled > > Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH5: IDE controller at PCI slot 00:1f.1 > ICH5: chipset revision 2 > ICH5: not 100% native mode: will probe irqs later > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA > ICH5-SATA: IDE controller at PCI slot 00:1f.2 > ICH5-SATA: chipset revision 2 > ICH5-SATA: 100% native mode on irq 18 > ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio > hda: ST3120026AS, ATA DISK drive > hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) > hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) > blk: queue c041d460, I/O limit 4095Mb (mask 0xffffffff) > hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive > hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive > ide0 at 0xfe00-0xfe07,0xfe12 on irq 18 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: attached ide-disk driver. > hda: host protected area => 1 > hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(33) > hdc: attached ide-cdrom driver. > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.12 > hdd: attached ide-cdrom driver. > hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > Partition check: > /dev/ide/host0/bus0/target0/lun0: p1 p2 > SCSI subsystem driver Revision: 1.00 > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > i2c-core.o: i2c core module version 2.8.0 (20030714) > i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714) > i2c-proc.o version 2.8.0 (20030714) > Initializing Cryptographic API > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 8192 buckets, 64Kbytes > TCP: Hash tables configured (established 262144 bind 65536) > Linux IP multicast router 0.06 plus PIM-SM > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > VFS: Cannot open root device "sda2" or 08:02 > Please append a correct "root=" boot option > Kernel panic: VFS: Unable to mount root fs on 08:02
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |