lkml.org 
[lkml]   [2003]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject3c59x + 2.6.0-test7
hi,

this note will probably not fullfill the needs of a "bug filing", but at
least i'd like to say there "is something with the 3c59x driver". since
i've seen several other oddities with this driver on this list in the
last time, here it comes:

i have a 3c905C-TX ("Vortex") in my ppc32 box, working fine under
2.4.22. with 2.6.0-test7 the 3c59x.ko module get loaded, but then the
machine just freezes. this is the behaviour during the standard booting
process. upon booting with "init=/bin/bash" i am able to do "modprobe
3c59x". the card gets loaded. i can assign an ip adress to the card, ok.
but after a couple of minutes or at least upon unloading the driver, the
machine just freezes. there is *no* oops shown, nothing in the logs,
SYS-REQ is not working, the machine just halts.

yes, this is quite odd, reproducible perhaps only here@home, another
3c59x card is working fine with 2.6.0-test7 under ia32 in the next room.
if this helps: gcc is 3.3.2, Debian/unstable, binutils 2.14.90.0.6,
compiled under 2.4.22.

my .config is at http://nerdbynature.de/bits/.config

evil@sheep:~$ cat /proc/cpuinfo
cpu : 604r
clock : ???
revision : 49.2 (pvr 0009 3102)
bogomips : 299.00
machine : PReP Utah (Powerstack II Pro4000)
l2 cache : 512KiB, parity disabled SRAM:synchronous, pipelined,
no parity
evil@sheep:~$

thanks,
Christian.
--
BOFH excuse #427:

network down, IP packets delivered via UPS

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.028 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site