lkml.org 
[lkml]   [2003]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: via-rhine on 2.4.23-pre6 Too much work at interrupt, status=0x00001000. (fwd)
    > Date: Thu, 16 Oct 2003 12:27:17 -0700
    > From: John Wong <kernel@implode.net>
    > To: linux-kernel@vger.kernel.org
    > Subject: via-rhine on 2.4.23-pre6 Too much work at interrupt,
    > status=0x00001000.
    >
    > The system used to run 2.4.22 and did not have this too much work
    > problem. There were some other hardware changes. The system used to be
    > a Pentium 100 on a Triton 430FX chipset Intel Advanced/EV board. Now it
    > is a K6 2 - 500 on a Via Apollo MVP3 chipset on FIC VA-503+ board.
    > The NIC stayed the same. The kernel was recompiled and ACPI was
    > enabled.
    >
    > I noticed in 2.4.23-pre2 -> pre3
    > [netdrvr] sync with 2.5: epic100, fealnx, via-rhine, winbond-840


    This cset contains no functional via-rhine changes... First thing to do
    would be try to 2.4.23-pre2. But my main suspect would be ACPI.

    Jeff


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:58    [W:0.020 / U:0.780 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site