lkml.org 
[lkml]   [2003]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Asterisk] DTMF noise
Wolfgang Fritz wrote:
> There exists a long text about DTMF detection somewhere on the net (I
> may have the link in the office but I'm on vacation now). What I
> remember is that a "correct" DTMF detection requires much more computing
> power as the present i4l implementation needs (much longer audio samples
> for the goertzel filter, a larger number of frequencies to check) and a
> standard test procedure with a lot of test cases which are not available
> to mortal humans (audio tapes from Bellcore IIRC)

Take a look at this:

http://www-s.ti.com/sc/psheets/spra096a/spra096a.pdf

It describes an algorithm, plus test results. It was tested on a TI
DSP using those very Bellcore tapes, plus another set of tests, and
passes both tests very well.

Of course your ISDN hardware + phone handset may have much worse
analogue circuitry, but I would hope the Bellcore tapes represent that
to some degree.

Unfortunately, TI have removed the version of their application node
which includes DSP source code. It can be found here instead:

http://sulcata6.cs.ccu.edu.tw/~vlsi/data/c54x/spra096.pdf

I guess if that _exact_ DSP algorithm were recoded in C, you could be
reasonably confident that the C implementation would pass those
Bellcore and MITEL tests with reasonable analogue hardware. That's
probably the best you can do on the digital side.

enjoy,
-- Jamie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.144 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site