lkml.org 
[lkml]   [2003]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [parisc-linux] Generic RTC driver in 2.4.x?
On Sat, 28 Dec 2002, Geert Uytterhoeven wrote:
> On Thu, 26 Dec 2002, Tom Rini wrote:
> > On Tue, Dec 24, 2002 at 03:51:47PM -0800, Randolph Chung wrote:
> > > > AFAIK the generic RTC driver is used on PA-RISC, PPC, and m68k.
> > > >
> > > > Are you interested in a backport to 2.4.x?
> > >
> > > On parisc we already have a version of the generic RTC driver in our
> > > 2.4 tree. If there's something more "official" or common we can adopt
> > > that version.
> >
> > Similarly, PPC has had it's own 'generic' RTC driver in the kernel for
> > ages, so there's no pressing need, but if the 2.5 version makes its way
> > back into 2.4 (as the 2.5 version has some minor changes needed for
> > everyone which weren't in the 2.4 m68k version), we can easily switch to
> > that version.
>
> I already merged some of your 2.5.x changes with the driver in the m68k 2.4.x
> tree.
>
> I'll do some more merges, and get back to you...

The following patch adds the generic RTC driver to 2.4.20 (applies fine to
2.4.21-pre2). This driver provides a /dev/rtc-compatible interface to the real
time clock on machines without a PC-style RTC chip. It is used as the primary
RTC driver on m68k, pa-risc, and ppc. This driver is already present in 2.5.x.

Pa-risc and ppc people (any other users?), please send me your enhancements (or
just ack if none are necessary), so I can send genrtc to Marcelo.

Thanks!

Documentation/Configure.help | 28 +
arch/m68k/config.in | 5
arch/m68k/kernel/m68k_ksyms.c | 5
arch/m68k/kernel/setup.c | 3
arch/m68k/q40/config.c | 41 ++
drivers/char/Makefile | 1
include/asm-m68k/machdep.h | 4
include/asm-m68k/rtc.h | 44 ++
include/linux/rtc.h | 28 +
linux-m68k-2.4.20/drivers/char/genrtc.c | 524 ++++++++++++++++++++++++++++++++ 10 files changed, 678 insertions, 5 deletions

--- linux-2.4.20/Documentation/Configure.help Tue Oct 29 18:40:45 2002
+++ linux-m68k-2.4.20/Documentation/Configure.help Wed Oct 16 11:01:53 2002
@@ -18959,6 +18959,34 @@
The module is called rtc.o. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.

+Generic Real Time Clock Support
+CONFIG_GEN_RTC
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+ In 2.4 and later kernels this is the only way to set and get rtc
+ time on m68k systems so it is highly recommended.
+
+ It reports status information via the file /proc/driver/rtc and its
+ behaviour is set by various ioctls on /dev/rtc. If you enable the
+ "extended RTC operation" below it will also provide an emulation
+ for RTC_UIE which is required by some programs and may improve
+ precision in some cases.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module is called genrtc.o. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>. To load the
+ module automaticaly add 'alias char-major-10-135 genrtc' to your
+ /etc/modules.conf
+
+Extended RTC operation
+CONFIG_GEN_RTC_X
+ Provides an emulation for RTC_UIE which is required by some programs
+ and may improve precision of the generic RTC support in some cases.
+
Tadpole ANA H8 Support
CONFIG_H8
The Hitachi H8/337 is a microcontroller used to deal with the power
--- linux-2.4.20/arch/m68k/config.in Fri Sep 13 10:14:59 2002
+++ linux-m68k-2.4.20/arch/m68k/config.in Tue Aug 13 09:14:30 2002
@@ -517,8 +517,11 @@
if [ "$CONFIG_SUN3" = "y" ]; then
define_bool CONFIG_GEN_RTC y
else
- bool 'Generic /dev/rtc emulation' CONFIG_GEN_RTC
+ tristate 'Generic /dev/rtc emulation' CONFIG_GEN_RTC
fi
+fi
+if [ "$CONFIG_GEN_RTC" != "n" ]; then
+ bool ' Extended RTC operation' CONFIG_GEN_RTC_X
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
--- linux-2.4.20/arch/m68k/kernel/m68k_ksyms.c Thu Jan 4 22:00:55 2001
+++ linux-m68k-2.4.20/arch/m68k/kernel/m68k_ksyms.c Fri Mar 1 12:29:44 2002
@@ -18,6 +18,7 @@
#include <asm/checksum.h>
#include <asm/hardirq.h>
#include <asm/softirq.h>
+#include <asm/rtc.h>

asmlinkage long long __ashldi3 (long long, int);
asmlinkage long long __ashrdi3 (long long, int);
@@ -49,6 +50,10 @@
EXPORT_SYMBOL(kernel_set_cachemode);
#endif /* !CONFIG_SUN3 */
EXPORT_SYMBOL(m68k_debug_device);
+EXPORT_SYMBOL(mach_hwclk);
+EXPORT_SYMBOL(mach_get_ss);
+EXPORT_SYMBOL(mach_get_rtc_pll);
+EXPORT_SYMBOL(mach_set_rtc_pll);
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(dump_thread);
EXPORT_SYMBOL(strnlen);
--- linux-2.4.20/arch/m68k/kernel/setup.c Fri Sep 13 10:15:01 2002
+++ linux-m68k-2.4.20/arch/m68k/kernel/setup.c Mon Sep 9 13:07:29 2002
@@ -90,6 +90,9 @@
void (*mach_gettod) (int*, int*, int*, int*, int*, int*);
int (*mach_hwclk) (int, struct rtc_time*) = NULL;
int (*mach_set_clock_mmss) (unsigned long) = NULL;
+unsigned int (*mach_get_ss)(void) = NULL;
+int (*mach_get_rtc_pll)(struct rtc_pll_info *) = NULL;
+int (*mach_set_rtc_pll)(struct rtc_pll_info *) = NULL;
void (*mach_reset)( void );
void (*mach_halt)( void ) = NULL;
void (*mach_power_off)( void ) = NULL;
--- linux-2.4.20/arch/m68k/q40/config.c Fri Sep 13 10:15:02 2002
+++ linux-m68k-2.4.20/arch/m68k/q40/config.c Mon Sep 9 13:07:29 2002
@@ -58,7 +58,10 @@
extern void q40_gettod (int *year, int *mon, int *day, int *hour,
int *min, int *sec);
extern int q40_hwclk (int, struct rtc_time *);
+extern unsigned int q40_get_ss (void);
extern int q40_set_clock_mmss (unsigned long);
+static int q40_get_rtc_pll(struct rtc_pll_info *pll);
+static int q40_set_rtc_pll(struct rtc_pll_info *pll);
extern void q40_reset (void);
void q40_halt(void);
extern void q40_waitbut(void);
@@ -196,6 +199,9 @@
mach_gettimeoffset = q40_gettimeoffset;
mach_gettod = q40_gettod;
mach_hwclk = q40_hwclk;
+ mach_get_ss = q40_get_ss;
+ mach_get_rtc_pll = q40_get_rtc_pll;
+ mach_set_rtc_pll = q40_set_rtc_pll;
mach_set_clock_mmss = q40_set_clock_mmss;

mach_reset = q40_reset;
@@ -331,6 +337,11 @@
return 0;
}

+unsigned int q40_get_ss()
+{
+ return bcd2bin(Q40_RTC_SECS);
+}
+
/*
* Set the minutes and seconds from seconds value 'nowtime'. Fail if
* clock is out by > 30 minutes. Logic lifted from atari code.
@@ -362,3 +373,33 @@
return retval;
}

+
+/* get and set PLL calibration of RTC clock */
+#define Q40_RTC_PLL_MASK ((1<<5)-1)
+#define Q40_RTC_PLL_SIGN (1<<5)
+
+static int q40_get_rtc_pll(struct rtc_pll_info *pll)
+{
+ int tmp=Q40_RTC_CTRL;
+ pll->pll_value = tmp & Q40_RTC_PLL_MASK;
+ if (tmp & Q40_RTC_PLL_SIGN)
+ pll->pll_value = -pll->pll_value;
+ pll->pll_max=31;
+ pll->pll_min=-31;
+ pll->pll_posmult=512;
+ pll->pll_negmult=256;
+ pll->pll_clock=125829120;
+ return 0;
+ }
+
+static int q40_set_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (!pll->pll_ctrl){
+ /* the docs are a bit unclear so I am doublesetting RTC_WRITE here ... */
+ int tmp=(pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) | Q40_RTC_WRITE;
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
+ Q40_RTC_CTRL = tmp;
+ Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+ return 0;
+ } else return -EINVAL;
+}
--- linux-2.4.20/drivers/char/Makefile Wed Nov 27 11:02:06 2002
+++ linux-m68k-2.4.20/drivers/char/Makefile Tue Nov 26 13:24:32 2002
@@ -222,6 +222,7 @@
obj-$(CONFIG_PC110_PAD) += pc110pad.o
obj-$(CONFIG_MK712_MOUSE) += mk712.o
obj-$(CONFIG_RTC) += rtc.o
+obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),)
obj-$(CONFIG_NVRAM) += nvram.o
--- /dev/null Mon Mar 18 12:17:27 2002
+++ linux-m68k-2.4.20/drivers/char/genrtc.c Sun Jan 5 15:24:28 2003
@@ -0,0 +1,524 @@
+/*
+ * Real Time Clock interface for q40 and other m68k machines
+ * emulate some RTC irq capabilities in software
+ *
+ * Copyright (C) 1999 Richard Zidlicky
+ *
+ * based on Paul Gortmaker's rtc.c device and
+ * Sam Creasey Generic rtc driver
+ *
+ * This driver allows use of the real time clock (built into
+ * nearly all computers) from user space. It exports the /dev/rtc
+ * interface supporting various ioctl() and also the /proc/dev/rtc
+ * pseudo-file for status information.
+ *
+ * The ioctls can be used to set the interrupt behaviour where
+ * supported.
+ *
+ * The /dev/rtc interface will block on reads until an interrupt
+ * has been received. If a RTC interrupt has already happened,
+ * it will output an unsigned long and then block. The output value
+ * contains the interrupt status in the low byte and the number of
+ * interrupts since the last read in the remaining high bytes. The
+ * /dev/rtc interface can also be used with the select(2) call.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+
+ * 1.01 fix for 2.3.X rz@linux-m68k.org
+ * 1.02 merged with code from genrtc.c rz@linux-m68k.org
+ * 1.03 make it more portable zippel@linux-m68k.org
+ * 1.04 removed useless timer code rz@linux-m68k.org
+ * 1.05 portable RTC_UIE emulation rz@linux-m68k.org
+ * 1.06 set_rtc_time can return an error trini@kernel.crashing.org
+ */
+
+#define RTC_VERSION "1.06"
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fcntl.h>
+
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/rtc.h>
+
+/*
+ * We sponge a minor off of the misc major. No need slurping
+ * up another valuable major dev number for this. If you add
+ * an ioctl, make sure you don't conflict with SPARC's RTC
+ * ioctls.
+ */
+
+static DECLARE_WAIT_QUEUE_HEAD(gen_rtc_wait);
+
+static int gen_rtc_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+
+/*
+ * Bits in gen_rtc_status.
+ */
+
+#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
+
+unsigned char gen_rtc_status; /* bitmapped status byte. */
+unsigned long gen_rtc_irq_data; /* our output to the world */
+
+/* months start at 0 now */
+unsigned char days_in_mo[] =
+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+static int irq_active;
+
+#ifdef CONFIG_GEN_RTC_X
+struct tq_struct genrtc_task;
+static struct timer_list timer_task;
+
+static unsigned int oldsecs;
+static int lostint;
+static int tt_exp;
+
+void gen_rtc_timer(unsigned long data);
+
+static volatile int stask_active; /* schedule_task */
+static volatile int ttask_active; /* timer_task */
+static int stop_rtc_timers; /* don't requeue tasks */
+static spinlock_t gen_rtc_lock = SPIN_LOCK_UNLOCKED;
+
+/*
+ * Routine to poll RTC seconds field for change as often as posible,
+ * after first RTC_UIE use timer to reduce polling
+ */
+void genrtc_troutine(void *data)
+{
+ unsigned int tmp = get_rtc_ss();
+
+ if (stop_rtc_timers) {
+ stask_active = 0;
+ return;
+ }
+
+ if (oldsecs != tmp){
+ oldsecs = tmp;
+
+ timer_task.function = gen_rtc_timer;
+ timer_task.expires = jiffies + HZ - (HZ/10);
+ tt_exp=timer_task.expires;
+ ttask_active=1;
+ stask_active=0;
+ add_timer(&timer_task);
+
+ gen_rtc_interrupt(0);
+ } else if (schedule_task(&genrtc_task) == 0)
+ stask_active = 0;
+}
+
+void gen_rtc_timer(unsigned long data)
+{
+ lostint = get_rtc_ss() - oldsecs ;
+ if (lostint<0)
+ lostint = 60 - lostint;
+ if (time_after(jiffies, tt_exp))
+ printk(KERN_INFO "genrtc: timer task delayed by %ld jiffies\n",
+ jiffies-tt_exp);
+ ttask_active=0;
+ stask_active=1;
+ if ((schedule_task(&genrtc_task) == 0))
+ stask_active = 0;
+}
+
+/*
+ * call gen_rtc_interrupt function to signal an RTC_UIE,
+ * arg is unused.
+ * Could be invoked either from a real interrupt handler or
+ * from some routine that periodically (eg 100HZ) monitors
+ * whether RTC_SECS changed
+ */
+void gen_rtc_interrupt(unsigned long arg)
+{
+ /* We store the status in the low byte and the number of
+ * interrupts received since the last read in the remainder
+ * of rtc_irq_data. */
+
+ gen_rtc_irq_data += 0x100;
+ gen_rtc_irq_data &= ~0xff;
+ gen_rtc_irq_data |= RTC_UIE;
+
+ if (lostint){
+ printk("genrtc: system delaying clock ticks?\n");
+ /* increment count so that userspace knows something is wrong */
+ gen_rtc_irq_data += ((lostint-1)<<8);
+ lostint = 0;
+ }
+
+ wake_up_interruptible(&gen_rtc_wait);
+}
+
+/*
+ * Now all the various file operations that we export.
+ */
+static ssize_t gen_rtc_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long data;
+ ssize_t retval;
+
+ if (count != sizeof (unsigned int) && count != sizeof (unsigned long))
+ return -EINVAL;
+
+ if (file->f_flags & O_NONBLOCK && !gen_rtc_irq_data)
+ return -EAGAIN;
+
+ add_wait_queue(&gen_rtc_wait, &wait);
+ retval = -ERESTARTSYS;
+
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = xchg(&gen_rtc_irq_data, 0);
+ if (data)
+ break;
+ if (signal_pending(current))
+ goto out;
+ schedule();
+ }
+
+ /* first test allows optimizer to nuke this case for 32-bit machines */
+ if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
+ unsigned int uidata = data;
+ retval = put_user(uidata, (unsigned long *)buf);
+ }
+ else {
+ retval = put_user(data, (unsigned long *)buf);
+ }
+ if (!retval)
+ retval = sizeof(unsigned long);
+ out:
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&gen_rtc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int gen_rtc_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ poll_wait(file, &gen_rtc_wait, wait);
+ if (gen_rtc_irq_data != 0)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+#endif
+
+/*
+ * Used to disable/enable interrupts, only RTC_UIE supported
+ * We also clear out any old irq data after an ioctl() that
+ * meddles with the interrupt enable/disable bits.
+ */
+
+static inline void gen_clear_rtc_irq_bit(unsigned char bit)
+{
+#ifdef CONFIG_GEN_RTC_X
+ stop_rtc_timers = 1;
+ if (ttask_active){
+ del_timer_sync(&timer_task);
+ ttask_active = 0;
+ }
+ while (stask_active)
+ schedule();
+
+ spin_lock(&gen_rtc_lock);
+ irq_active = 0;
+ spin_unlock(&gen_rtc_lock);
+#endif
+}
+
+static inline int gen_set_rtc_irq_bit(unsigned char bit)
+{
+#ifdef CONFIG_GEN_RTC_X
+ spin_lock(&gen_rtc_lock);
+ if ( !irq_active ) {
+ irq_active = 1;
+ stop_rtc_timers = 0;
+ lostint = 0;
+ genrtc_task.routine = genrtc_troutine;
+ oldsecs = get_rtc_ss();
+ init_timer(&timer_task);
+
+ stask_active = 1;
+ if (schedule_task(&genrtc_task) == 0){
+ stask_active = 0;
+ }
+ }
+ spin_unlock(&gen_rtc_lock);
+ gen_rtc_irq_data = 0;
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
+
+static int gen_rtc_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct rtc_time wtime;
+ struct rtc_pll_info pll;
+
+ switch (cmd) {
+
+ case RTC_PLL_GET:
+ if (get_rtc_pll(&pll))
+ return -EINVAL;
+ else
+ return copy_to_user((void *)arg, &pll, sizeof pll) ? -EFAULT : 0;
+
+ case RTC_PLL_SET:
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+ if (copy_from_user(&pll, (struct rtc_pll_info*)arg,
+ sizeof(pll)))
+ return -EFAULT;
+ return set_rtc_pll(&pll);
+
+ case RTC_UIE_OFF: /* disable ints from RTC updates. */
+ gen_clear_rtc_irq_bit(RTC_UIE);
+ return 0;
+
+ case RTC_UIE_ON: /* enable ints for RTC updates. */
+ return gen_set_rtc_irq_bit(RTC_UIE);
+
+ case RTC_RD_TIME: /* Read the time/date from RTC */
+ /* this doesn't get week-day, who cares */
+ memset(&wtime, 0, sizeof(wtime));
+ get_rtc_time(&wtime);
+
+ return copy_to_user((void *)arg, &wtime, sizeof(wtime)) ? -EFAULT : 0;
+
+ case RTC_SET_TIME: /* Set the RTC */
+ {
+ int year;
+ unsigned char leap_yr;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ if (copy_from_user(&wtime, (struct rtc_time *)arg,
+ sizeof(wtime)))
+ return -EFAULT;
+
+ year = wtime.tm_year + 1900;
+ leap_yr = ((!(year % 4) && (year % 100)) ||
+ !(year % 400));
+
+ if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1))
+ return -EINVAL;
+
+ if (wtime.tm_mday < 0 || wtime.tm_mday >
+ (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr)))
+ return -EINVAL;
+
+ if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 ||
+ wtime.tm_min < 0 || wtime.tm_min >= 60 ||
+ wtime.tm_sec < 0 || wtime.tm_sec >= 60)
+ return -EINVAL;
+
+ return set_rtc_time(&wtime);
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * We enforce only one user at a time here with the open/close.
+ * Also clear the previous interrupt data on an open, and clean
+ * up things on a close.
+ */
+
+static int gen_rtc_open(struct inode *inode, struct file *file)
+{
+ if (gen_rtc_status & RTC_IS_OPEN)
+ return -EBUSY;
+
+ MOD_INC_USE_COUNT;
+
+ gen_rtc_status |= RTC_IS_OPEN;
+ gen_rtc_irq_data = 0;
+ irq_active = 0;
+
+ return 0;
+}
+
+static int gen_rtc_release(struct inode *inode, struct file *file)
+{
+ /*
+ * Turn off all interrupts once the device is no longer
+ * in use and clear the data.
+ */
+
+ gen_clear_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE);
+
+ gen_rtc_status &= ~RTC_IS_OPEN;
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+static int gen_rtc_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+
+
+/*
+ * The various file operations we support.
+ */
+
+static struct file_operations gen_rtc_fops = {
+ owner: THIS_MODULE,
+#ifdef CONFIG_GEN_RTC_X
+ read: gen_rtc_read,
+ poll: gen_rtc_poll,
+#endif
+ ioctl: gen_rtc_ioctl,
+ open: gen_rtc_open,
+ release: gen_rtc_release
+};
+
+static struct miscdevice rtc_gen_dev =
+{
+ RTC_MINOR,
+ "rtc",
+ &gen_rtc_fops
+};
+
+int __init rtc_generic_init(void)
+{
+
+ printk(KERN_INFO "Generic RTC Driver v%s\n", RTC_VERSION);
+
+ misc_register(&rtc_gen_dev);
+ create_proc_read_entry ("driver/rtc", 0, 0, gen_rtc_read_proc, NULL);
+
+ return 0;
+}
+
+static void __exit rtc_generic_exit(void)
+{
+ remove_proc_entry ("driver/rtc", NULL);
+ misc_deregister(&rtc_gen_dev);
+}
+
+module_init(rtc_generic_init);
+module_exit(rtc_generic_exit);
+EXPORT_NO_SYMBOLS;
+
+
+/*
+ * Info exported via "/proc/rtc".
+ */
+
+int gen_rtc_proc_output(char *buf)
+{
+ char *p;
+ struct rtc_time tm;
+ unsigned tmp;
+ struct rtc_pll_info pll;
+
+ p = buf;
+
+ get_rtc_time(&tm);
+
+ p += sprintf(p,
+ "rtc_time\t: %02d:%02d:%02d\n"
+ "rtc_date\t: %04d-%02d-%02d\n"
+ "rtc_epoch\t: %04u\n",
+ tm.tm_hour, tm.tm_min, tm.tm_sec,
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, 1900);
+
+ tm.tm_hour=0;tm.tm_min=0;tm.tm_sec=0;
+
+ p += sprintf(p, "alarm\t\t: ");
+ if (tm.tm_hour <= 24)
+ p += sprintf(p, "%02d:", tm.tm_hour);
+ else
+ p += sprintf(p, "**:");
+
+ if (tm.tm_min <= 59)
+ p += sprintf(p, "%02d:", tm.tm_min);
+ else
+ p += sprintf(p, "**:");
+
+ if (tm.tm_sec <= 59)
+ p += sprintf(p, "%02d\n", tm.tm_sec);
+ else
+ p += sprintf(p, "**\n");
+
+ tmp= RTC_24H ;
+ p += sprintf(p,
+ "DST_enable\t: %s\n"
+ "BCD\t\t: %s\n"
+ "24hr\t\t: %s\n"
+ "square_wave\t: %s\n"
+ "alarm_IRQ\t: %s\n"
+ "update_IRQ\t: %s\n"
+ "periodic_IRQ\t: %s\n"
+ "periodic_freq\t: %ld\n"
+ "batt_status\t: %s\n",
+ (tmp & RTC_DST_EN) ? "yes" : "no",
+ (tmp & RTC_DM_BINARY) ? "no" : "yes",
+ (tmp & RTC_24H) ? "yes" : "no",
+ (tmp & RTC_SQWE) ? "yes" : "no",
+ (tmp & RTC_AIE) ? "yes" : "no",
+ irq_active ? "yes" : "no",
+ (tmp & RTC_PIE) ? "yes" : "no",
+ 0L /* freq */,
+ "okay" );
+ if (!get_rtc_pll(&pll))
+ p += sprintf(p,
+ "PLL adjustment\t: %d\n"
+ "PLL max +ve adjustment\t: %d\n"
+ "PLL max -ve adjustment\t: %d\n"
+ "PLL +ve adjustment factor\t: %d\n"
+ "PLL -ve adjustment factor\t: %d\n"
+ "PLL frequency\t: %ld\n",
+ pll.pll_value,
+ pll.pll_max,
+ pll.pll_min,
+ pll.pll_posmult,
+ pll.pll_negmult,
+ pll.pll_clock);
+ return p - buf;
+}
+
+static int gen_rtc_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len = gen_rtc_proc_output (page);
+ if (len <= off+count) *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len>count) len = count;
+ if (len<0) len = 0;
+ return len;
+}
+
+
+MODULE_AUTHOR("Richard Zidlicky");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -c -o genrtc.o genrtc.c"
+ * End:
+ */
+
--- linux-2.4.20/include/asm-m68k/machdep.h Wed May 29 10:14:12 2002
+++ linux-m68k-2.4.20/include/asm-m68k/machdep.h Mon Sep 9 13:07:29 2002
@@ -5,6 +5,7 @@
struct kbd_repeat;
struct mktime;
struct rtc_time;
+struct rtc_pll_info;
struct gendisk;
struct buffer_head;

@@ -29,6 +30,9 @@
extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
int *min, int *sec);
extern int (*mach_hwclk)(int, struct rtc_time*);
+extern unsigned int (*mach_get_ss)(void);
+extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_clock_mmss)(unsigned long);
extern void (*mach_reset)( void );
extern void (*mach_halt)( void );
--- linux-2.4.20/include/asm-m68k/rtc.h Wed May 29 10:14:13 2002
+++ linux-m68k-2.4.20/include/asm-m68k/rtc.h Sun Jan 5 15:24:28 2003
@@ -13,9 +13,8 @@

#ifdef __KERNEL__

-#include <linux/config.h>
#include <linux/rtc.h>
-#include <linux/delay.h>
+#include <asm/errno.h>
#include <asm/machdep.h>

#define RTC_PIE 0x40 /* periodic interrupt enable */
@@ -30,7 +29,48 @@
#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */

+static inline void get_rtc_time(struct rtc_time *time)
+{
+ /*
+ * Only the values that we read from the RTC are set. We leave
+ * tm_wday, tm_yday and tm_isdst untouched. Even though the
+ * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+ * by the RTC when initially set to a non-zero value.
+ */
+ mach_hwclk(0, time);
+}

+static inline int set_rtc_time(struct rtc_time *time)
+{
+ return mach_hwclk(1, time);
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ if (mach_get_ss)
+ return mach_get_ss();
+ else{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+ }
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (mach_get_rtc_pll)
+ return mach_get_rtc_pll(pll);
+ else
+ return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (mach_set_rtc_pll)
+ return mach_set_rtc_pll(pll);
+ else
+ return -EINVAL;
+}
#endif /* __KERNEL__ */

#endif /* _ASM__RTC_H */
--- linux-2.4.20/include/linux/rtc.h Mon Feb 19 09:47:19 2001
+++ linux-m68k-2.4.20/include/linux/rtc.h Sun Jan 5 15:24:28 2003
@@ -39,10 +39,32 @@
struct rtc_time time; /* time the alarm is set to */
};

+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ * pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ * pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+ int pll_ctrl; /* placeholder for fancier control */
+ int pll_value; /* get/set correction value */
+ int pll_max; /* max +ve (faster) adjustment value */
+ int pll_min; /* max -ve (slower) adjustment value */
+ int pll_posmult; /* factor for +ve corection */
+ int pll_negmult; /* factor for -ve corection */
+ long pll_clock; /* base PLL frequency */
+};

/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * CONFIG_RTC/CONFIG_EFI_RTC was enabled.
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
*/

#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
@@ -66,4 +88,6 @@
#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/

+#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
+#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
#endif /* _LINUX_RTC_H_ */
Gr{oetje,eeting}s,
Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.083 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site