lkml.org 
[lkml]   [2003]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] unify netdev config follow-up
Add more netdev bus dependencies.  Patch by Arnd Bergmann.

Linus, please apply.



===== drivers/net/Kconfig 1.8 vs edited =====
--- 1.8/drivers/net/Kconfig Thu Jan 2 22:05:21 2003
+++ edited/drivers/net/Kconfig Fri Jan 3 17:48:11 2003
@@ -2364,7 +2364,7 @@

config ARLAN
tristate "Aironet Arlan 655 & IC2200 DS support"
- depends on NET_RADIO
+ depends on NET_RADIO && ISA
---help---
Aironet makes Arlan, a class of wireless LAN adapters. These use the
www.Telxon.com chip, which is also used on several similar cards.
===== drivers/net/wan/Kconfig 1.1 vs edited =====
--- 1.1/drivers/net/wan/Kconfig Wed Oct 30 02:16:55 2002
+++ edited/drivers/net/wan/Kconfig Fri Jan 3 18:25:47 2003
@@ -62,7 +62,7 @@
#
config COMX
tristate "MultiGate (COMX) synchronous serial boards support"
- depends on WAN
+ depends on WAN && (ISA || PCI)
---help---
Say Y if you want to use any board from the MultiGate (COMX) family.
These boards are synchronous serial adapters for the PC,
@@ -176,7 +176,7 @@
#
config DSCC4
tristate "Etinc PCISYNC serial board support"
- depends on WAN && m
+ depends on WAN && PCI && m
help
This is a driver for Etinc PCISYNC boards based on the Infineon
(ex. Siemens) DSCC4 chipset. It is supposed to work with the four
@@ -193,7 +193,7 @@
#
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
- depends on WAN
+ depends on WAN && PCI
---help---
This is a driver for the following Lan Media family of serial
boards.
@@ -222,7 +222,7 @@
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && m
+ depends on WAN && ISA && m
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.

@@ -336,7 +336,7 @@

config N2
tristate "SDL RISCom/N2 support"
- depends on HDLC
+ depends on HDLC && ISA
help
This driver is for RISCom/N2 single or dual channel ISA cards
made by SDL Communications Inc. If you have such a card,
@@ -348,7 +348,7 @@

config C101
tristate "Moxa C101 support"
- depends on HDLC
+ depends on HDLC && ISA
help
This driver is for C101 SuperSync ISA cards made by Moxa
Technologies Co., Ltd. If you have such a card,
@@ -358,7 +358,7 @@

config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC
+ depends on HDLC && PCI
---help---
This driver supports the FarSync T-Series X.21 (and V.35/V.24) cards
from FarSite Communications Ltd.
@@ -432,7 +432,7 @@

config SDLA
tristate "SDLA (Sangoma S502/S508) support"
- depends on DLCI
+ depends on DLCI && ISA
help
Say Y here if you need a driver for the Sangoma S502A, S502E, and
S508 Frame Relay Access Devices. These are multi-protocol cards, but
@@ -465,7 +465,7 @@

config VENDOR_SANGOMA
tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER
+ depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA)
---help---
WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
is a family of intelligent multiprotocol WAN adapters with data
@@ -559,7 +559,7 @@

config CYCLADES_SYNC
tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
- depends on WAN_ROUTER_DRIVERS
+ depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
---help---
Cyclom 2X from Cyclades Corporation (<http://www.cyclades.com/> and

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.030 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site