lkml.org 
[lkml]   [2003]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] 2.5.59 morse code panics
> [alan@lxorguk.ukuu.org.uk]
>
> On Thu, 2003-01-30 at 17:36, Dave Jones wrote:
>
> > As this patch further builds upon the previous one,
> > It'd take a complete change of mind on his part to take
> > this as it is.
>
> If its attached to atkbd then its not a PCism and its now
> nicely modularised in the atkbd driver. Providing we have
> a clear split between the core "morse sender" and the
> platform specific morse output device (do we want
> morse_ops 8)) it should be clean and you can write morse
> drivers for pc speaker, for non pc keyboard and even for
> soundblaster 8)

Of course we want morseops. :)
v2 follows.

--
Tomas Szepe <szepe@pinerecords.com>


drivers/input/keyboard/atkbd.c | 22 +++++-
include/linux/morseops.h | 26 +++++++
init/Kconfig | 14 +++-
kernel/Makefile | 1
kernel/morse.c | 137 +++++++++++++++++++++++++++++++++++++++++
kernel/panic.c | 4 -
6 files changed, 200 insertions(+), 4 deletions(-)

diff -urN b/drivers/input/keyboard/atkbd.c a/drivers/input/keyboard/atkbd.c
--- b/drivers/input/keyboard/atkbd.c 2002-12-08 20:06:16.000000000 +0100
+++ a/drivers/input/keyboard/atkbd.c 2003-01-31 10:20:56.000000000 +0100
@@ -445,6 +445,23 @@
atkbd_command(atkbd, &atkbd->oldset, ATKBD_CMD_SSCANSET);
}

+#ifdef CONFIG_MORSE_PANICS
+static struct atkbd *atkbd_blinkdev = NULL;
+int atkbd_blink(char led) {
+ char param[2] = "\0\0";
+ led = led ? (0x01 | 0x04) : 0x00;
+ *param = led;
+
+ if (atkbd_blinkdev == NULL)
+ return -1;
+
+ if (atkbd_command(atkbd_blinkdev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+
+ return 0;
+}
+#endif
+
/*
* atkbd_disconnect() closes and frees.
*/
@@ -543,11 +560,12 @@
set_bit(atkbd->keycode[i], atkbd->dev.keybit);

input_register_device(&atkbd->dev);
-
+#ifdef CONFIG_MORSE_PANICS
+ atkbd_blinkdev = atkbd;
+#endif
printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
}

-
static struct serio_dev atkbd_dev = {
.interrupt = atkbd_interrupt,
.connect = atkbd_connect,
diff -urN b/include/linux/morseops.h a/include/linux/morseops.h
--- b/include/linux/morseops.h 1970-01-01 01:00:00.000000000 +0100
+++ a/include/linux/morseops.h 2003-01-31 11:20:05.000000000 +0100
@@ -0,0 +1,26 @@
+/* Yes, it's morse code ops indeed. */
+
+#ifndef _LINUX_MORSEOPS_H
+#define _LINUX_MORSEOPS_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_MORSE_PANICS)
+
+extern const unsigned char morsetable[]; /* in kernel/morse.c */
+void panic_morseblink(char *buf); /* in kernel/morse.c */
+
+static inline unsigned char tomorse(char c) {
+ if (c >= 'a' && c <= 'z')
+ c = c - 'a' + 'A';
+ if (c >= '"' && c <= '_') {
+ return morsetable[c - '"'];
+ } else
+ return 0;
+}
+
+#else /* CONFIG_MORSE_PANICS */
+ #define panic_morseblink(buf)
+#endif /* CONFIG_MORSE_PANICS */
+
+#endif /* _LINUX_MORSEOPS_H */
diff -urN b/init/Kconfig a/init/Kconfig
--- b/init/Kconfig 2003-01-17 04:27:43.000000000 +0100
+++ a/init/Kconfig 2003-01-31 11:06:31.000000000 +0100
@@ -98,6 +98,19 @@
13 => 8 KB
12 => 4 KB

+config MORSE_PANICS
+ bool "Morse code panics"
+ depends on KEYBOARD_ATKBD || VT
+ help
+ When enabled, this code will make a panicking kernel cry for
+ help in morse code, signalling on the leds of a possibly attached
+ AT keyboard and/or a bleeper. You can enable/disable your morse
+ output devices of choice using the "panicmorse" kernel boot
+ parameter.
+
+ If unsure, say Y. This feature is very helpful for those who
+ spend most of their time in X.
+
endmenu


@@ -159,4 +172,3 @@
in <file:Documentation/kmod.txt>.

endmenu
-
diff -urN b/kernel/Makefile a/kernel/Makefile
--- b/kernel/Makefile 2003-01-09 10:59:41.000000000 +0100
+++ a/kernel/Makefile 2003-01-31 10:28:04.000000000 +0100
@@ -22,6 +22,7 @@
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
obj-$(CONFIG_COMPAT) += compat.o
+obj-$(CONFIG_MORSE_PANICS) += morse.o

ifneq ($(CONFIG_IA64),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff -urN b/kernel/morse.c a/kernel/morse.c
--- b/kernel/morse.c 1970-01-01 01:00:00.000000000 +0100
+++ a/kernel/morse.c 2003-01-31 11:19:54.000000000 +0100
@@ -0,0 +1,137 @@
+/*
+ * kernel/morse.c
+ *
+ * Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
+ * Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
+ *
+ * Tell the user who may be running in X and not see the console that
+ * we have panic'd. This is to distingush panics from "real lockups."
+ * Could in theory send the panic message as morse, but that is left
+ * as an exercise for the reader.
+ *
+ * And now it's done! LED and speaker morse code by Andrew Rodland
+ * <arodland@noln.com>, with improvements based on suggestions from
+ * linux@horizon.com and a host of others.
+ *
+ * Initial 2.5 morsepanics port and cleanup by
+ * Tomas Szepe <szepe@pinerecords.com>, January 2003.
+ */
+
+#include <linux/config.h>
+#include <linux/morseops.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/vt_kern.h>
+
+#define DITLEN (HZ / 5)
+#define DAHLEN (3 * DITLEN)
+#define SPACELEN (7 * DITLEN)
+#define FREQ 844
+
+/* Only blink by default if AT keyboard is available,
+ * go for beeping if it isn't.
+ */
+#ifdef CONFIG_KEYBOARD_ATKBD
+extern int atkbd_blink(char led); /* drivers/input/keyboards/atkbd.c */
+#define do_blink(x) atkbd_blink(x)
+static int morse_setting = 1;
+#else
+#define do_blink(x)
+static int morse_setting = 2;
+#endif
+
+const unsigned char morsetable[] = {
+ 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */
+ 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */
+ 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */
+ 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */
+ 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */
+ 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */
+ 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */
+ 0, 0, 0, 0, 0154 /* [\]^_ */
+};
+
+void panic_morseblink(char *buf)
+{
+ static unsigned long next_jiffie = 0;
+ static char * bufpos = 0;
+ static unsigned char morse = 0;
+ static char state = 1;
+
+ if (!morse_setting)
+ return;
+
+ if (!buf)
+ buf = "Uh oh, we lost the panic msg.";
+
+ /* Waiting for something? */
+ if (bufpos && time_after(next_jiffie, jiffies))
+ return;
+
+ if (state) { /* Coming off of a blink. */
+ if (morse_setting & 0x01)
+ do_blink(0);
+
+ state = 0;
+
+ if (morse > 1) {
+ /* Not done yet, just a one-dit pause. */
+ next_jiffie = jiffies + DITLEN;
+ } else {
+ /* Get a new char, figure out how much space. */
+
+ /* First time through */
+ if (!bufpos)
+ bufpos = (char *) buf;
+
+ if (!*bufpos) {
+ /* Repeating */
+ bufpos = (char *) buf;
+ next_jiffie = jiffies + SPACELEN;
+ } else {
+ /* Inter-letter space */
+ next_jiffie = jiffies + DAHLEN;
+ }
+
+ if (!(morse = tomorse(*bufpos))) {
+ next_jiffie = jiffies + SPACELEN;
+ state = 1; /* And get us back here */
+ }
+ bufpos++;
+ }
+ } else {
+ /* Starting a new blink. We have a valid code in morse. */
+ int len;
+
+ len = (morse & 001) ? DAHLEN : DITLEN;
+
+#ifdef CONFIG_VT
+ if (morse_setting & 0x02)
+ kd_mksound(FREQ, len);
+#endif
+
+ next_jiffie = jiffies + len;
+
+ if (morse_setting & 0x01)
+ do_blink(1);
+
+ state = 1;
+ morse >>= 1;
+ }
+}
+
+static int __init panicmorse_setup(char *str)
+{
+ int par;
+ if (get_option(&str, &par))
+ morse_setting = par;
+ return 1;
+}
+
+/* "panicmorse=0" disables the blinking as it caused problems with
+ * certain console switches.
+ *
+ * "panicmorse | 1" does the show using kbd leds.
+ * "panicmorse | 2" throws in bleeping via kd_mksound().
+ */
+__setup("panicmorse=", panicmorse_setup);
diff -urN b/kernel/panic.c a/kernel/panic.c
--- b/kernel/panic.c 2003-01-09 10:59:41.000000000 +0100
+++ a/kernel/panic.c 2003-01-31 10:36:50.000000000 +0100
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/sysrq.h>
#include <linux/interrupt.h>
+#include <linux/morseops.h>

asmlinkage void sys_sync(void); /* it's really int */

@@ -95,7 +96,8 @@
disabled_wait(caller);
#endif
local_irq_enable();
- for(;;) {
+ for (;;) {
+ panic_morseblink(buf);
CHECK_EMERGENCY_SYNC
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.100 / U:2.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site