lkml.org 
[lkml]   [2003]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectaic7xxx broken in 2.5.53/54 ?
Looks like the aic7xxx driver in 2.5.53 and 54 are broken on my hardware.
The older driver works fine. The new driver used to work until 2.5.52.
Does this look familiar to anyone ?

hda: ATAPI 48X CD-ROM drive, 120kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hda, sector 0
aic7xxx: PCI Device 0:1:0 failed memory mapped test. Using PIO.
Uhhuh. NMI received for unknown reason 25 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
aic7xxx: PCI Device 0:1:1 failed memory mapped test. Using PIO.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
<Adaptec aic7896/97 Ultra2 SCSI adapter>
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi0: PCI error Interrupt at seqaddr = 0x2
scsi0: Signaled a Target Abort
scsi1: PCI error Interrupt at seqaddr = 0x2
scsi1: Signaled a Target Abort
Uhhuh. NMI received for unknown reason 25 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
(scsi1:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
(scsi1:A:1): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
(scsi1:A:2): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
<Adaptec aic7896/97 Ultra2 SCSI adapter>
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs

Vendor: IBM-ESXS Model: ST318305LC !# Rev: B245
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:0:0: Tagged Queuing enabled. Depth 253
Vendor: IBM-ESXS Model: ST318305LC !# Rev: B245
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:1:0: Tagged Queuing enabled. Depth 253
Vendor: IBM-ESXS Model: ST318305LC !# Rev: B245
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:2:0: Tagged Queuing enabled. Depth 253
Vendor: IBM Model: AuSaV1S2 Rev: 0
Type: Processor ANSI SCSI revision: 02

The hardware [4-CPU P3 xeon] -

[root@llm04 root]# lspci
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 21)
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
00:00.2 Host bridge: ServerWorks: Unknown device 0006
00:00.3 Host bridge: ServerWorks: Unknown device 0006
00:01.0 SCSI storage controller: Adaptec AIC-7896U2/7897U2
00:01.1 SCSI storage controller: Adaptec AIC-7896U2/7897U2
00:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] )00:06.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 USB Controller (rev 04)
02:03.0 RAID bus controller: IBM Netfinity ServeRAID controller
02:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c)
02:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c)

Thanks
Dipankar
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.152 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site