Messages in this thread | | | Date | Wed, 29 Jan 2003 15:16:08 +0600 | From | Anuradha Ratnaweera <> | Subject | Re: Where are the matroxfb updates? |
| |
On Wed, Jan 29, 2003 at 12:37:52AM -0800, Petr Vandrovec wrote: > > On Wed, Jan 29, 2003 at 02:22:26PM +0600, Anuradha Ratnaweera wrote: > > > both monitors display the same screen. /dev/fb1 gets registered, and > > ttys get moved to it with con2fb, but not to any of the monitors. Both > > monitors still seem to act as /dev/fb0. The moved tty no longer exist. > > What about using matroxset to set things up?
Config.in patch applied.
# ./matroxset -m 00001111 # ioctl failed: Device or resource busy
Have tried other variations, too.
# ls /proc/drivers/mga/ fb0 # cat /proc/drivers/mga/fb0/bios BIOS: 1.2.21 Output: 0x00 TVOut: no PINS: found Info: c02a0a8c
Howerver, fb1 gets registered (yes as the secondary head of fb0).
# dmesg | grep matrox Kernel command line: BOOT_IMAGE=linux ro root=306 video=matrox:vesa:0x192,font:SUN12x22,nopan matroxfb: Matrox G450 detected matroxfb: MTRR's turned on matroxfb: 1152x864x16bpp (virtual: 1152x864) matroxfb: framebuffer at 0x42000000, mapped to 0xe0805000, size 33554432 matroxfb_crtc2: secondary head of fb0 was registered as fb1
Anuradha
--
Debian GNU/Linux (kernel 2.4.21-pre4)
Adore, v.: To venerate expectantly. -- Ambrose Bierce, "The Devil's Dictionary"
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |