lkml.org 
[lkml]   [2003]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectDFE-580TX lockup
    From
    Date
    Hi,

    I'm using v1.10 of the sundance driver for DFE-580TX (on 2.4.19), I have
    5 of these cards in a system. Every few weeks all networking on the box
    stops working, only a reboot can fix it. (not tried unloading and
    reloading the modules yet, box is miles away to get to keyboard).
    Problem does not appear to be reproducable.

    Is this a known problem, is there a solution, if not, would you like
    some more debugging information?

    Thanks.

    Attached is lspci -vv, and /proc/interrupts output.

    --
    // Gianni Tedesco (gianni at scaramanga dot co dot uk)
    lynx --source www.scaramanga.co.uk/gianni-at-ecsc.asc | gpg --import
    8646BE7D: 6D9F 2287 870E A2C9 8F60 3A3C 91B5 7669 8646 BE7D
    00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

    00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 64, cache line size 08

    00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

    00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

    00:03.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
    Subsystem: Compaq Computer Corporation: Unknown device b0f3
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 0
    Region 0: I/O ports at 1800 [size=256]
    Region 1: Memory at f7df0000 (32-bit, non-prefetchable) [size=256]

    00:04.0 RAID bus controller: Symbios Logic Inc. (formerly NCR): Unknown device 0010 (rev 02)
    Subsystem: Compaq Computer Corporation: Unknown device 4040
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 192 (7500ns min, 2000ns max), cache line size 08
    Interrupt: pin A routed to IRQ 5
    Region 0: I/O ports at 2000 [size=256]
    Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
    Expansion ROM at <unassigned> [disabled] [size=512K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
    Subsystem: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2000ns min), cache line size 08
    Region 0: Memory at f3000000 (32-bit, prefetchable) [size=16M]
    Region 1: I/O ports at 2400 [size=256]
    Region 2: Memory at f4ff0000 (32-bit, non-prefetchable) [size=4K]
    Expansion ROM at <unassigned> [disabled] [size=128K]
    Capabilities: [5c] Power Management version 1
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, cache line size 08
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 00003000-00003fff
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Bridge: PM- B3+

    00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51)
    Subsystem: ServerWorks OSB4 South Bridge
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

    00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Region 4: I/O ports at 2800 [size=16]

    01:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 3
    Region 0: I/O ports at 3000 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    01:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at 3080 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    01:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 3
    Region 0: I/O ports at 3400 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    01:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at 3480 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    02:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12)
    Subsystem: Compaq Computer Corporation: Unknown device a2f8
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000

    02:06.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, cache line size 08
    Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
    I/O behind bridge: 00004000-00004fff
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Bridge: PM- B3+

    02:08.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, cache line size 08
    Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
    I/O behind bridge: 00005000-00005fff
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Bridge: PM- B3+

    02:09.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, cache line size 08
    Bus: primary=02, secondary=05, subordinate=05, sec-latency=64
    I/O behind bridge: 00006000-00006fff
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Bridge: PM- B3+

    03:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 4000 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    03:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 4080 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    03:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 4400 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    03:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 4480 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    04:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at 5000 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    04:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 3
    Region 0: I/O ports at 5080 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    04:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at 5400 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    04:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 3
    Region 0: I/O ports at 5480 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    05:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 6000 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    05:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 6080 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    05:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 6400 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    05:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 6480 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    07:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12)
    Subsystem: Compaq Computer Corporation: Unknown device a2f9
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000

    07:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, cache line size 08
    Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
    I/O behind bridge: 00007000-00007fff
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Bridge: PM- B3+

    08:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 7000 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    08:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 7080 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    08:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 7400 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    08:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
    Subsystem: D-Link System Inc: Unknown device 1012
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2500ns min, 2500ns max), cache line size 08
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 7480 [size=128]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

    CPU0
    0: 4482909 XT-PIC timer
    1: 2 XT-PIC keyboard
    2: 0 XT-PIC cascade
    3: 11286193 XT-PIC eth0, eth2, eth9, eth11
    5: 228654 XT-PIC ida0
    8: 1 XT-PIC rtc
    11: 10898381 XT-PIC eth1, eth3, eth8, eth10
    14: 3 XT-PIC ide0
    15: 4224483 XT-PIC eth4, eth5, eth6, eth7, eth12, eth13, eth14, eth15, eth16, eth17, eth18, eth19
    NMI: 0
    LOC: 4483084
    ERR: 0
    MIS: 0
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2005-03-22 13:32    [W:0.054 / U:1.400 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site