lkml.org 
[lkml]   [2003]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: FW: PDC202XX DMA loss in 2.4.21-pre3-ac4
I dont think so. Without SMART data collection being
enabled, it wont give out the any SMART data at all.
How, did the SMART data show:

Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst
Threshold Raw Value
( 3)Spin Up Time 0x0027 252 252 063
0
( 4)Start Stop Count 0x0032 253 253 000
0
( 5)Reallocated Sector Ct 0x0033 253 253 063
0
( 6)Read Channel Margin 0x0001 253 253 100
0
( 7)Seek Error Rate 0x000a 253 252 000
0
( 8)Seek Time Preformance 0x0027 244 244 187
36736
( 9)Power On Hours 0x0032 253 253 000
4341
( 10)Spin Retry Count 0x002b 252 252 223
0
( 11)Calibration Retry Count 0x002b 252 252 223
0
( 12)Power Cycle Count 0x0032 253 253 000
43
(192)Power-Off Retract Count 0x0032 253 253 000
0
(193)Load Cycle Count 0x0032 253 253 000
0
(194)Temperature 0x0032 253 253 000
0
(195)Hardware ECC Recovered 0x000a 253 252 000
221
(196)Reallocated Event Count 0x0008 253 253 000
0
(197)Current Pending Sector 0x0008 253 253 000
0
(198)Offline Uncorrectable 0x0008 253 253 000
0
(199)UDMA CRC Error Count 0x0008 199 199 000
0
(200)Unknown Attribute 0x000a 253 252 000
0
(201)Unknown Attribute 0x000a 253 252 000
0
(202)Unknown Attribute 0x000a 253 252 000
0
(203)Unknown Attribute 0x000b 253 252 180
0
(204)Unknown Attribute 0x000a 253 252 000
0
(205)Unknown Attribute 0x000a 253 252 000
0
(207)Unknown Attribute 0x002a 252 252 000
0
(208)Unknown Attribute 0x002a 252 252 000
0
(209)Unknown Attribute 0x0024 253 253 000
0
( 99)Unknown Attribute 0x0004 253 253 000
0
(100)Unknown Attribute 0x0004 253 253 000
0
(101)Unknown Attribute 0x0004 253 253 000
0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 05
ATA Error Count: 8
Non-Fatal Count: 0

Also, the SMART error log,

Error Log Structure 5:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
08 d1 01 01 4f c2 e0 b0 459147
08 d0 01 00 4f c2 e0 b0 459148
08 d1 01 01 4f c2 e0 b0 459148
00 04 01 0b 4f c2 e0 51 279972

You can retrieve the sector# ...

Thanks
Manish

--- Andre Hedrick <andre@linux-ide.org> wrote:
> On Sat, 25 Jan 2003, Manish Lachwani wrote:
>
> > The "Hardware ECC Recovered" indicates the number
> of
> > ECC errors corrected in the drive. Do one thing.
> Try
> > to swap the drive with the drive on another ATA
> cable.
> > So, swap /dev/hde with /dev/hda (or whatever)
> > physically and check if the error follows the
> drive or
> > the ATA cable.
> >
> > If it follows the drive, you may have to replace
> the
> > drive. Additionally, from the SMART error log #5:
> >
> > 00 04 01 0b 4f c2 e0 51 279972
>
> NO!
> command aborted
> amount to transfer == 1 sector
> have to dig through notes to decode
> ...
> lcyl smart passcode
> hcyl smart passcode
> primary device
>
> ready_seek_error
>
>
> It barfed the command ...
>
> try -e first
>
> Cheers,
>
> Andre Hedrick
> LAD Storage Consulting Group
>
>
>


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.045 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site