lkml.org 
[lkml]   [2003]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Probably buggy MP Table and ACPI doesn't works
Ooops , thank you very much! :-D

You are right!

Anyone have an idea about this?

Byez

Bubba wrote:

>fix your clock, last time i checked the month was january, not september.
>
>On Friday 12 September 2003 06:19, AnonimoVeneziano wrote:
>
>
>>Hi, I've compiled my kernel with Local APIC and IO-APIC function on a
>>UniProcessor system (MSI KT4 Ultra + Athlon 2400+) and at the system
>>start I see this (kernel 2.4.21-pre3-ac4 , but is similar with all the
>>kernels) :
>>
>>Linux version 2.4.21-pre3-ac4 (root@valinor) (gcc version 3.2.2 20030109
>>(Debian prerelease)) #1 ven set 12 00:56:30 CEST 2003
>>BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
>> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
>> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>>511MB LOWMEM available.
>>found SMP MP-table at 000fb930
>>hm, page 000fb000 reserved twice.
>>hm, page 000fc000 reserved twice.
>>hm, page 000f6000 reserved twice.
>>hm, page 000f7000 reserved twice.
>>On node 0 totalpages: 131056
>>zone(0): 4096 pages.
>>zone(1): 126960 pages.
>>zone(2): 0 pages.
>>Intel MultiProcessor Specification v1.4
>> Virtual Wire compatibility mode.
>>OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
>>Processor #0 Pentium(tm) Pro APIC version 17
>>I/O APIC #2 Version 3 at 0xFEC00000.
>>Enabling APIC mode: Flat. Using 1 I/O APICs
>>Processors: 1
>>Kernel command line: auto BOOT_IMAGE=Linux ro root=305
>>video=vesa:ywrap,mtrr Initializing CPU#0
>>Detected 2000.130 MHz processor.
>>Console: colour dummy device 80x25
>>Calibrating delay loop... 3984.58 BogoMIPS
>>Memory: 516224k/524224k available (1192k kernel code, 7612k reserved,
>>412k data, 104k init, 0k highmem)
>>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
>>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>CPU: L2 Cache: 256K (64 bytes/line)
>>Intel machine check architecture supported.
>>Intel machine check reporting enabled on CPU#0.
>>CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
>>CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
>>CPU: AMD Athlon(tm) XP 2400+ stepping 01
>>Enabling fast FPU save and restore... done.
>>Enabling unmasked SIMD FPU exception support... done.
>>Checking 'hlt' instruction... OK.
>>POSIX conformance testing by UNIFIX
>>enabled ExtINT on CPU#0
>>ESR value before enabling vector: 00000080
>>ESR value after enabling vector: 00000000
>>ENABLING IO-APIC IRQs
>>Setting 2 in the phys_id_present_map
>>...changing IO-APIC physical APIC ID to 2 ... ok.
>>init IO_APIC IRQs
>> IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-17, 2-18, 2-20, 2-22,
>>2-23 not connected.
>>..TIMER: vector=0x31 pin1=2 pin2=0
>>number of MP IRQ sources: 19.
>>number of IO-APIC #2 registers: 24.
>>testing the IO APIC.......................
>>
>>IO APIC #2......
>>.... register #00: 02000000
>>....... : physical APIC id: 02
>>.... register #01: 00178003
>>....... : max redirection entries: 0017
>>....... : PRQ implemented: 1
>>....... : IO APIC version: 0003
>>An unexpected IO-APIC was found. If this kernel release is less than
>>three months old please report this to linux-smp@vger.kernel.org
>>.... IRQ redirection table:
>> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>> 00 000 00 1 0 0 0 0 0 0 00
>> 01 001 01 0 0 0 0 0 1 1 39
>> 02 001 01 0 0 0 0 0 1 1 31
>> 03 001 01 0 0 0 0 0 1 1 41
>> 04 001 01 0 0 0 0 0 1 1 49
>> 05 000 00 1 0 0 0 0 0 0 00
>> 06 001 01 0 0 0 0 0 1 1 51
>> 07 001 01 0 0 0 0 0 1 1 59
>> 08 001 01 0 0 0 0 0 1 1 61
>> 09 000 00 1 0 0 0 0 0 0 00
>> 0a 000 00 1 0 0 0 0 0 0 00
>> 0b 000 00 1 0 0 0 0 0 0 00
>> 0c 001 01 0 0 0 0 0 1 1 69
>> 0d 001 01 0 0 0 0 0 1 1 71
>> 0e 001 01 0 0 0 0 0 1 1 79
>> 0f 001 01 0 0 0 0 0 1 1 81
>> 10 001 01 1 1 0 1 0 1 1 89
>> 11 000 00 1 0 0 0 0 0 0 00
>> 12 000 00 1 0 0 0 0 0 0 00
>> 13 001 01 1 1 0 1 0 1 1 91
>> 14 000 00 1 0 0 0 0 0 0 00
>> 15 001 01 1 1 0 1 0 1 1 99
>> 16 000 00 1 0 0 0 0 0 0 00
>> 17 000 00 1 0 0 0 0 0 0 00
>>IRQ to pin mappings:
>>IRQ0 -> 0:2
>>IRQ1 -> 0:1
>>IRQ3 -> 0:3
>>IRQ4 -> 0:4
>>IRQ6 -> 0:6
>>IRQ7 -> 0:7
>>IRQ8 -> 0:8
>>IRQ12 -> 0:12
>>IRQ13 -> 0:13
>>IRQ14 -> 0:14
>>IRQ15 -> 0:15
>>IRQ16 -> 0:16
>>IRQ19 -> 0:19
>>IRQ21 -> 0:21
>>.................................... done.
>>Using local APIC timer interrupts.
>>calibrating APIC timer ...
>>..... CPU clock speed is 2000.2553 MHz.
>>..... host bus clock speed is 266.7008 MHz.
>>cpu: 0, clocks: 2667008, slice: 1333504
>>CPU0<T0:2667008,T1:1333504,D:0,S:1333504,C:2667008>
>>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>>mtrr: detected mtrr type: Intel
>>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>PCI: Using configuration type 1
>>PCI: Probing PCI hardware
>>PCI: Using IRQ router default [1106/3177] at 00:11.0
>>PCI->APIC IRQ transform: (B0,I7,P0) -> 19
>>PCI->APIC IRQ transform: (B0,I12,P0) -> 16
>>PCI->APIC IRQ transform: (B0,I16,P0) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P1) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P2) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P3) -> 21
>>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
>>PCI: Via IRQ fixup for 00:10.2, from 10 to 5
>>PCI: Via IRQ fixup for 00:10.0, from 11 to 5
>>PnPBIOS: Found PnP BIOS installation structure at 0xc00f79a0
>>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x686b, dseg 0xf0000
>>PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
>>Linux NET4.0 for Linux 2.4
>>Based upon Swansea University Computer Society NET3.039
>>Initializing RT netlink socket
>>Starting kswapd
>>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
>>devfs: boot_options: 0x1
>>ACPI: Core Subsystem version [20011018]
>>ACPI: Subsystem enabled
>>vesafb: framebuffer at 0xd8000000, mapped to 0xe0807000, size 65536k
>>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>>vesafb: protected mode interface info at c000:b7d0
>>vesafb: pmi: set display start = c00cb815, set palette = c00cb89a
>>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
>>3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
>>vesafb: scrolling: ywrap using protected mode interface, yres_virtual=16384
>>vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
>>Console: switching to colour frame buffer device 128x48
>>fb0: VESA VGA frame buffer device
>>pty: 256 Unix98 ptys configured
>>Real Time Clock Driver v1.10e
>>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>VP_IDE: IDE controller at PCI slot 00:11.1
>>PCI: No IRQ known for interrupt pin A of device 00:11.1. Probably buggy
>>MP table.
>>VP_IDE: chipset revision 6
>>VP_IDE: not 100% native mode: will probe irqs later
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
>> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>>hda: QUANTUM FIREBALLP AS30.0, ATA DISK drive
>>hdb: MAXTOR 6L060J3, ATA DISK drive
>>hda: DMA disabled
>>blk: queue c02d8860, I/O limit 4095Mb (mask 0xffffffff)
>>hdb: DMA disabled
>>blk: queue c02d899c, I/O limit 4095Mb (mask 0xffffffff)
>>hdc: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
>>hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive
>>hdc: DMA disabled
>>hdd: DMA disabled
>>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>ide1 at 0x170-0x177,0x376 on irq 15
>>hda: host protected area => 1
>>hda: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=3649/255/63,
>>UDMA(100) hdb: host protected area => 1
>>hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63,
>>UDMA(133)
>>Partition check:
>> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
>> /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 > p4
>>NET4: Linux TCP/IP 1.0 for NET4.0
>>IP Protocols: ICMP, UDP, TCP, IGMP
>>IP: routing cache hash table of 4096 buckets, 32Kbytes
>>TCP: Hash tables configured (established 32768 bind 65536)
>>reiserfs: checking transaction log (device 03:05) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>VFS: Mounted root (reiserfs filesystem) readonly.
>>Mounted devfs on /dev
>>Freeing unused kernel memory: 104k freed
>>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>>Adding Swap: 506036k swap-space (priority -1)
>>Adding Swap: 506036k swap-space (priority -2)
>>IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
>>i2c-core.o: i2c core module
>>8139too Fast Ethernet driver 0.9.26
>>eth0: RealTek RTL8139 Fast Ethernet at 0xe4952f00, 00:40:f4:55:a1:40, IRQ
>>19 eth0: Identified 8139 chip type 'RTL-8139C'
>>Power Resource: found
>>Power Resource: found
>>Power Resource: found
>>Power Resource: found
>>ACPI: Power Button (FF) found
>>ACPI: Multiple power buttons detected, ignoring fixed-feature
>>ACPI: Power Button (CM) found
>>ACPI: Sleep Button (CM) found
>>ACPI: System firmware supports S0 S1 S4 S5
>>Processor[0]: C0 C1, 8 throttling states
>>Non-volatile memory driver v1.2
>>SCSI subsystem driver Revision: 1.00
>>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>> Vendor: _NEC Model: DV-5800A Rev: 1.90
>> Type: CD-ROM ANSI SCSI revision: 02
>> Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g
>> Type: CD-ROM ANSI SCSI revision: 02
>>cmpci: version $Revision: 5.64 $ time 01:00:52 Sep 12 2003
>>cmpci: found CM8738 adapter at io 0xe800 irq 16
>>cmpci: chip version = 055
>>cmpci: Inverse SPDIF-in
>>cmpci: Enable SPDIF loop
>>arp_tables: (C) 2002 David S. Miller
>>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per
>>conntrack ip_tables: (C) 2000-2002 Netfilter core team
>>ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
>>ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
>>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
>>parport0: irq 7
>>ide: no cache flush required.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>isapnp: Scanning for PnP cards...
>>isapnp: No Plug & Play device found
>>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
>>SERIAL_PCI ISAPNP enabled
>>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>>ttyS01 at 0x02f8 (irq = 3) is a 16550A
>>reiserfs: checking transaction log (device 03:01) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:06) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:07) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:08) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>Journalled Block Device driver loaded
>>kjournald starting. Commit interval 5 seconds
>>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal
>>EXT3-fs: mounted filesystem with ordered data mode.
>>kjournald starting. Commit interval 5 seconds
>>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal
>>EXT3-fs: mounted filesystem with ordered data mode.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
>> detected
>>
>>What does mean buggy MP table on device 00.11.1 ?? (That is the IDE
>>controller I think) In my bios I can select 1.4. and 1.1. MPS table,
>>I've tried both but the situation doesn't change. This messsage is
>>appeared recently , with the bios upgrade from 1.1 to 1.3. Doing lspci
>>-vvvxxx I've noticed that the IRQ of 00.11.1 is routed to IRQ 0 .
>>
>>And there is another problem. With IO-APIC activated in the kernel ACPI
>>works in a strange way. I can't shutdown the system by pressing the
>> On/Off button, and when I do "shutdown -h now" the system instead to
>>halt it reboots . I hear the HD that are Off, but the fans and the PSU
>>remain Switch On, after few seconds the HDs switch on again and the
>>system restarts. Why??
>>
>>If I disable IO-APIC and use Local APIC only ACPI works correctly, but I
>>recive the message "spurious 8259A interrupt: IRQ7" during the boot or
>>few time later after the boot. Should I disable APIC at all?? This
>>problem of ACPI is present with 1.1 bios too
>>
>>Thanks
>>
>>Bye
>>
>>Marcello
>>
>>
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>
>
>
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.073 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site