Messages in this thread |  | | Date | Fri, 24 Jan 2003 22:48:36 +0100 | From | Arador <> | Subject | 2.5.59-mm5: cpu1 not working |
| |
machine: p3 2x800, 128 mb of ram, via VT82C686 chipset The problem is that in 2.5.59-mm kernels; /proc/interrupts shows something like this:
diego@estel:~$ cat /proc/interrupts CPU0 CPU1 0: 49316 0 IO-APIC-edge timer 1: 95 0 IO-APIC-edge i8042 2: 0 0 XT-PIC cascade 3: 1859 0 IO-APIC-edge serial 4: 912 0 IO-APIC-edge serial 8: 2 0 IO-APIC-edge rtc 10: 1291 0 IO-APIC-level VIA686A 14: 2407 0 IO-APIC-edge ide0 15: 11 0 IO-APIC-edge ide1 NMI: 101404 101288 LOC: 101258 101296 ERR: 0 MIS: 0
plain 2.5.59 works well. reverting kirq and kirq-up-fix patches (as suggested by Andrew Morton) from the -mm patchset fixes the problem.
Config attached This dmesg is from a 2.5.59-mm5 kernel with the kirq patch _reverted_
(BTW, this space testing the IO APIC.......................
IO APIC #2...... isn't a cut & paste error, it appears in dmesg)
Linux version 2.5.59-mm5 (diego@estel) (gcc versión 3.2.2 20030109 (Debian prerelease)) #4 SMP vie ene 24 22:16:17 CET 2003 Video mode to be used for restore is 30a BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000f64e0 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 6:8 APIC version 17 Processor #1 6:8 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: root=/dev/hda5 ro vga=0x30a profile=2 nmi_watchdog=1 kernel profiling enabled Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 802.853 MHz processor. Console: colour VGA+ 132x43 Calibrating delay loop... 1581.05 BogoMIPS Memory: 254552k/262080k available (1665k kernel code, 6792k reserved, 485k data, 144k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 732.17 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1601.53 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3182.59 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 activating NMI Watchdog ... done. testing NMI watchdog ... OK. number of MP IRQ sources: 19. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 001 01 1 1 0 1 0 1 1 81 0c 001 01 1 1 0 1 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 802.0804 MHz. ..... host bus clock speed is 133.0800 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 2 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.94 (c) Adam Belay pnp: Enabling Plug and Play Card Services. PnPBIOS: Found PnP BIOS installation structure at 0xc00fbcc0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbcf0, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 12 PCI->APIC IRQ transform: (B0,I7,P3) -> 12 PCI->APIC IRQ transform: (B0,I7,P2) -> 10 PCI->APIC IRQ transform: (B0,I9,P0) -> 11 PCI->APIC IRQ transform: (B0,I13,P0) -> 11 Enabling SEP on CPU 0 Enabling SEP on CPU 1 aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded PCI: Enabling Via external APIC routing Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6Y060L0, ATA DISK drive hda: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive hdd: ST340016A, ATA DISK drive hdc: DMA disabled hdd: DMA disabled ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(100) hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdd: host protected area => 1 hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33) hdd: hdd1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002 UTC). request_module[snd-card-0]: not ready request_module[snd-card-1]: not ready request_module[snd-card-2]: not ready request_module[snd-card-3]: not ready request_module[snd-card-4]: not ready request_module[snd-card-5]: not ready request_module[snd-card-6]: not ready request_module[snd-card-7]: not ready no UART detected at 0xffff ALSA sound/drivers/mpu401/mpu401.c:76: specify port PCI: Setting latency timer of device 00:07.5 to 64 ALSA device list: #0: VIA 82C686A/B at 0xcc00, irq 10 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 16Kbytes TCP: Hash tables configured (established 8192 bind 10922) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed Adding 530104k swap on /dev/hda6. Priority:-1 extents:1 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,5), internal journal parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) Module parport cannot be unloaded due to unsafe usage in include/linux/module.h:430 Module parport_pc cannot be unloaded due to unsafe usage in include/linux/module.h:430 parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdc, sector 0 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 Module ppp_async cannot be unloaded due to unsafe usage in include/linux/module.h:430 PPP BSD Compression module registered Module bsd_comp cannot be unloaded due to unsafe usage in include/linux/module.h:430 PPP Deflate Compression module registered Module ppp_deflate cannot be unloaded due to unsafe usage in include/linux/module.h:430 end_request: I/O error, dev hdc, sector 0 end_request: I/O error, dev hdc, sector 0 end_request: I/O error, dev hdc, sector 0 cdrom: This disc doesn't have any tracks I recognize!
Diego Calleja [unhandled content-type:application/octet-stream] |  |