lkml.org 
[lkml]   [2003]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Can't burn DVD under 2.5.59 with ide-cd
    On Thu, Jan 23, 2003 at 10:18:05PM +0100, Jens Axboe wrote:

    > No it's my mistake, should be blk_pc_request(). Sorry about that.

    Hello again ;-)

    I don't have more sucess now:

    Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
    Unlocked features: ProDVD Clone
    Limited features: speed
    This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
    TOC Type: 1 = CD-ROM
    scsidev: '/dev/hdc'
    devname: '/dev/hdc'
    scsibus: -2 target: -2 lun: -2
    Warning: Open by 'devname' is unintentional and not supported.
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.7'
    Driveropts: 'burnfree'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 2
    Response Format: 2
    Capabilities :
    Vendor_info : 'SONY '
    Identifikation : 'DVD RW DRU-500A '
    Revision : '1.0f'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
    Driver flags : DVD SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
    Drive buf size : 8126464 = 7936 KB
    FIFO size : 67108864 = 65536 KB
    Track 01: data 4001 MB
    Total size: 4001 MB = 2048512 sectors
    Current Secsize: 2048
    Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 249984
    Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
    Last chance to quit, starting dummy write in 9 seconds. 0.24% done, estimate finish Thu Jan 23 22:58:58 2003
    8 seconds. 0.49% done, estimate finish Thu Jan 23 22:58:59 2003
    7 seconds. 0.73% done, estimate finish Thu Jan 23 22:58:59 2003
    6 seconds. 0.98% done, estimate finish Thu Jan 23 22:58:59 2003
    5 seconds. 1.22% done, estimate finish Thu Jan 23 22:58:59 2003
    4 seconds. 1.46% done, estimate finish Thu Jan 23 22:58:59 2003
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    BURN-Free is ON.
    Starting new track at sector: 0
    Track 01: 4 of 4001 MB written (fifo 97%) 16.1x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 00 08 B8 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes:
    Sense Key: 0xFFFFFFFF [], Segment 0
    Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
    Sense flags: Blk 0 (not valid)
    resid: 63488
    cmd finished after 0.010s timeout 100s

    write track data: error after 4571136 bytes
    Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
    Writing time: 5.304s
    Average write speed 574.4x.
    Fixating...
    Fixating time: 77.059s
    cdrecord-prodvd: fifo had 1095 puts and 73 gets.
    cdrecord-prodvd: fifo was 0 times empty and 2 times full, min fill was 96%.
    Exit 254

    Thank you very much,

    Grégoire
    ________________________________________________________________
    http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:32    [W:0.024 / U:150.304 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site