lkml.org 
[lkml]   [2003]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] SMP parsing rewrite, phase 1
    Hi

    In case it's useful, lots of weird stuff happens when I boot with
    pci=noacpi (see attachment),none of which results in a successful boot :(

    I particularly liked this bit...

    PCI: Probing PCI hardware
    PCI: Discovered peer bus 0e
    PCI: Discovered peer bus 12
    PCI: Discovered primary peer bus 04 [IRQ]
    PCI: Discovered primary peer bus 13 [IRQ]
    PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0
    PCI BIOS passed nonexistent PCI bus 0!
    PCI BIOS passed nonexistent PCI bus 0!
    PCI BIOS passed nonexistent PCI bus 14!
    PCI BIOS passed nonexistent PCI bus 14!
    PCI BIOS passed nonexistent PCI bus 18!

    ;)
    Linux version 2.5.59 (root@r2d2.office) (gcc version 3.2) #2 SMP Tue Jan 21 17:30:26 GMT 2003
    Video mode to be used for restore is ffff
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bfffa000 (usable)
    BIOS-e820: 00000000bfffa000 - 00000000bffff000 (ACPI data)
    BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Warning only 4GB will be used.
    Use a PAE enabled kernel.
    3200MB HIGHMEM available.
    896MB LOWMEM available.
    On node 0 totalpages: 1048576
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 225280 pages, LIFO batch:16
    HighMem zone: 819200 pages, LIFO batch:16
    found SMP MP-table at 000f0490
    hm, page 000f0000 reserved twice.
    hm, page 000f1000 reserved twice.
    hm, page 000f0000 reserved twice.
    hm, page 000f1000 reserved twice.
    ACPI: RSDP (v000 ASUS ) @ 0x000f4ff0
    ACPI: RSDT (v001 ASUS PR-DLS 16944.11825) @ 0xbfffa000
    ACPI: FADT (v001 ASUS PR-DLS 16944.11825) @ 0xbfffa145
    ACPI: BOOT (v001 ASUS PR-DLS 16944.11825) @ 0xbfffa034
    ACPI: SPCR (v001 ASUS PR-DLS 16944.11825) @ 0xbfffa05c
    ACPI: MADT (v001 ASUS PR-DLS 16944.11825) @ 0xbfffa0a9
    ACPI: DSDT (v001 ASUS PR-DLS 00000.04096) @ 0x00000000
    ACPI: BIOS passes blacklist
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
    Processor #6 APIC version 16
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
    Processor #7 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x1] trigger[0x1] lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x1] trigger[0x1] lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    IOAPIC[0]: Assigned apic_id 2
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-15
    ACPI: IOAPIC (id[0x03] address[0xfec01000] global_irq_base[0x10])
    IOAPIC[1]: Assigned apic_id 3
    IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, IRQ 16-31
    ACPI: IOAPIC (id[0x04] address[0xfec02000] global_irq_base[0x20])
    IOAPIC[2]: Assigned apic_id 4
    IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, IRQ 32-47
    ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
    ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
    Enabling APIC mode: Flat. Using 3 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Building zonelist for node : 0
    Kernel command line: ro root=/dev/nfs ip=dhcp console=tty0 console=ttyS0,115200n8 init=/boot.sh pci=noacpi
    Initializing CPU#0
    PID hash table entries: 4096 (order 12: 32768 bytes)
    Detected 2591.566 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 5111.80 BogoMIPS
    Memory: 3100432k/4194304k available (1692k kernel code, 44152k reserved, 453k data, 312k init, 2228200k highmem)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    -> /dev
    -> /dev/console
    -> /root
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU#0: Thermal monitoring enabled
    Machine check exception polling timer started.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    CPU0: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07
    per-CPU timeslice cutoff: 1462.69 usecs.
    task migration cache decay timeout: 2 msecs.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    masked ExtINT on CPU#1
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 5177.34 BogoMIPS
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU#1: Thermal monitoring enabled
    CPU1: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07
    Total of 2 processors activated (10289.15 BogoMIPS).
    cpu_sibling_map[0] = 1
    cpu_sibling_map[1] = 0
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=0
    ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    ...trying to set up timer (IRQ0) through the 8259A ...
    ..... (found pin 0) ...works.
    testing the IO APIC.......................



    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 2591.0225 MHz.
    ..... host bus clock speed is 99.0662 MHz.
    checking TSC synchronization across 2 CPUs: passed.
    Starting migration thread for cpu 0
    Bringing up 1
    CPU 1 IS NOW UP!
    Starting migration thread for cpu 1
    CPUS done 4
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    mtrr: v2.0 (20020519)
    PCI: PCI BIOS revision 2.10 entry at 0xf1510, last bus=22
    PCI: Using configuration type 1
    BIO: pool of 256 setup, 14Kb (56 bytes/bio)
    biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
    biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
    biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
    biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
    biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
    biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
    ACPI: Subsystem revision 20030109
    tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired
    Parsing all Control Methods:..........................................................................................................................................................................................................
    Table [DSDT] - 643 Objects with 62 Devices 202 Methods 12 Regions
    ACPI Namespace successfully loaded at root c038b7fc
    evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful
    evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE31
    evgpe-0262: *** Info: GPE Block1 defined as GPE32 to GPE63
    Executing all Device _STA and_INI methods:..............................................................
    62 Devices found containing: 62 _STA, 4 _INI methods
    Completing Region/Field/Buffer/Package initialization:.......................................................................
    Initialized 8/12 Regions 0/0 Fields 49/49 Buffers 14/14 Packages (643 nodes)
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKQ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKR] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKT] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKV] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKW] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKX] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKY] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKZ] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    pci_link-0249 [07] acpi_pci_link_get_curr: Invalid use of IRQ 0
    ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11 12 14 15, disabled)
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    pci_bind-0191 [04] acpi_pci_bind : Device 00:00:0f.02 not present in PCI namespace
    ACPI: PCI Root Bridge [PCI1] (00:00)
    ACPI: PCI Root Bridge [PCI2] (00:00)
    ACPI: PCI Root Bridge [PCI3] (00:00)
    ACPI: PCI Root Bridge [PCI4] (00:00)
    block request queues:
    128 requests per read queue
    128 requests per write queue
    8 requests per batch
    enter congestion at 15
    exit congestion at 17
    PCI: Probing PCI hardware
    PCI: Discovered peer bus 0e
    PCI: Discovered peer bus 12
    PCI: Discovered primary peer bus 04 [IRQ]
    PCI: Discovered primary peer bus 13 [IRQ]
    PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0
    PCI BIOS passed nonexistent PCI bus 0!
    PCI BIOS passed nonexistent PCI bus 0!
    PCI BIOS passed nonexistent PCI bus 14!
    PCI BIOS passed nonexistent PCI bus 14!
    PCI BIOS passed nonexistent PCI bus 18!
    SBF: Simple Boot Flag extension found and enabled.
    SBF: Setting boot flags 0x80
    IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
    Enabling SEP on CPU 0
    Enabling SEP on CPU 1
    highmem bounce pool size: 64 pages
    aio_setup: sizeof(struct page) = 40
    devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x0
    ACPI: Power Button (FF) [PWRF]
    ACPI: Processor [CPU0] (supports C1)
    ACPI: Processor [CPU1] (supports C1)
    ACPI: Processor [CPU2] (supports C1)
    ACPI: Processor [CPU3] (supports C1)
    Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
    tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
    pty: 256 Unix98 ptys configured
    Real Time Clock Driver v1.11
    Intel(R) PRO/100 Network Driver - version 2.1.29-k1
    Copyright (c) 2002 Intel Corporation

    Freeing alive device c39c3800, eth%d
    e100: eth0: Intel(R) PRO/100 S Server Adapter
    Hardware receive checksums enabled

    Intel(R) PRO/1000 Network Driver - version 4.4.19-k1
    Copyright (c) 1999-2002 Intel Corporation.
    eth1: Intel(R) PRO/1000 Network Connection
    i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719)
    i2c-proc.o version 2.6.4 (20020719)
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP: routing cache hash table of 32768 buckets, 256Kbytes
    TCP: Hash tables configured (established 524288 bind 65536)
    Sending DHCP requests .<3>e100: eth0 NIC Link is Up 100 Mbps Full duplex
    e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex
    .<6>NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    .<6>NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    .<6>NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    NETDEV WATCHDOG: eth1: transmit timed out
    \
     
     \ /
      Last update: 2005-03-22 13:32    [W:0.039 / U:30.420 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site