Messages in this thread | | | Date | Thu, 02 Jan 2003 11:47:56 -0800 | From | Samuel Flory <> | Subject | Re: UDMA 133 on a 40 pin cable |
| |
Teodor Iacob wrote:
>>>00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master >>>IDE (rev 06) >>> >>>hdd: Maxtor 6Y060L0, ATA DISK drive >>> >>>the harddisk is DiamondPlus9 60GB 7200 rpm UDMA133 .. and the mainbboard >>>is Soltek 75-FRV >>>with KT400 chipset >>> >>> >>> >>> >> What's hdc? Hdd is the secondary slave. If it's the only device on >>the chain you should make sure you jumper the drive as a master. >> >> > >HDC it's a CD-RW .. it was not used at the time of the error ( i was doing >mke2fs on hdd1 when I got those errors in dmesg ). > > >
Try setting the cd-rw as a slave, and the hard drive as a master.
-- There is no such thing as obsolete hardware. Merely hardware that other people don't want. (The Second Rule of Hardware Acquisition) Sam Flory <sflory@rackable.com>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |