Messages in this thread | | | Date | Sun, 19 Jan 2003 14:00:49 +0100 | From | Gregoire Favre <> | Subject | Status of ide-cdrom writing? |
| |
Hello,
I sent this email to the cdwrite ml a while ago, and the conclusion was that it was a kernel bug... so I forward here ;-)
I got the same result with 2.5.58 (I need to compil a 2.5.59...).
Thank you very much ;-)
----- Forwarded message from Gregoire Favre <greg@ulima.unil.ch> -----
Date: Sun, 12 Jan 2003 22:58:50 +0100 From: Gregoire Favre <greg@ulima.unil.ch> To: cdwrite@other.debian.org Subject: Status of ide writing?
Hello,
is it possible to burn without idescsi under 2.5.56?
I got:
Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling Unlocked features: ProDVD Clone Limited features: speed This copy of cdrecord is licensed for: private/research/educational_non-commercial_use TOC Type: 1 = CD-ROM scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'SONY ' Identifikation : 'DVD RW DRU-500A ' Revision : '1.0f' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). Driver flags : DVD SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 8126464 = 7936 KB FIFO size : 67108864 = 65536 KB Track 01: data 3502 MB Total size: 3502 MB = 1793056 sectors Current Secsize: 2048 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 505440 Starting to write CD/DVD at speed 1 in real SAO mode for single session. Last chance to quit, starting real write in 9 seconds. 0.28% done, estimate finish Sun Jan 12 22:32:14 2003 0.56% done, estimate finish Sun Jan 12 22:29:15 2003 0.84% done, estimate finish Sun Jan 12 22:28:15 2003 1.12% done, estimate finish Sun Jan 12 22:27:45 2003 8 seconds. 1.39% done, estimate finish Sun Jan 12 22:28:39 2003 1.67% done, estimate finish Sun Jan 12 22:28:15 2003 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Starting new track at sector: 0 Track 01: 4 of 3502 MB written (fifo 99%) 13.1x.cdrecord-prodvd: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 08 B8 00 00 1F 00 status: 0x1 (GOOD STATUS) resid: 63488 cmd finished after 0.011s timeout 100s
write track data: error after 4571136 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 5.315s Average write speed 501.9x. Fixating... Fixating time: 84.976s cdrecord-prodvd: fifo had 1095 puts and 73 gets. cdrecord-prodvd: fifo was 0 times empty and 7 times full, min fill was 99%. Exit 254
Should I compil again with ide-scsi?
Thank you very much,
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |