[lkml]   [2003]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: radeonfb almost there.. but not quite! :)
Alessandro Suardi wrote:

> Radeonfb works better for me in 2.5.58, same card but on a
> Dell Latitude C640 - 1024x768 though, and xclk=16600.
> I say "better" and not simply "works" because
> - the gpm cursor positioned on characters shows different ones
> (eg. hovering on a 'd' it shows a highlighted 'B')
This works for me.

> - the pre-penguin display is garbage. The console though gets
> to recover right after the penguin display
Same here. I see the same garbage when switching resolutions
with fbset.

I also have a small problem when switching to and from X. Most of
the time everything is fine, but sometimes it is unreadable and
I have to switch back and forth again.

This is on an IBM Thinkpad A30p with 1600x1200 local display.
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=16600 from BIOS
radeonfb: probed DDR SGRAM 32768k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: 1600x1200
radeonfb: detected DFP panel size from BIOS: 1600x1200
radeonfb: ATI Radeon M6 LY DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected
radeonfb_pci_register END

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:32    [W:0.048 / U:22.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site