This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Sun May 12 13:33:35 2024 Received: from vger.kernel.org (vger.kernel.org [209.116.70.75]) by kylie.puddingonline.com (8.11.6/8.11.6) with ESMTP id h0FKF2o13369 for ; Wed, 15 Jan 2003 21:15:02 +0100 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 15 Jan 2003 15:03:08 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 15 Jan 2003 15:03:08 -0500 Received: from d12lmsgate-2.de.ibm.com ([194.196.100.235]:46530 "EHLO d12lmsgate-2.de.ibm.com") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Wed, 15 Jan 2003 15:03:04 -0500 Received: from d12relay02.de.ibm.com (d12relay02.de.ibm.com [9.165.215.23]) by d12lmsgate-2.de.ibm.com (8.12.3/8.12.3) with ESMTP id h0FKBrlK053358 for ; Wed, 15 Jan 2003 21:11:54 +0100 Received: from d12ml705.megacenter.de.ibm.com (d12ml705.megacenter.de.ibm.com [9.149.166.91]) by d12relay02.de.ibm.com (8.12.3/NCO/VER6.4) with ESMTP id h0FKBrp2092166 for ; Wed, 15 Jan 2003 21:11:53 +0100 Importance: High Subject: Cannot boot Linux 2.4.19 for IA 64 on an Itanium 2 single processor box To: linux-kernel@vger.kernel.org X-Mailer: Lotus Notes Release 5.0.7 March 21, 2001 Message-Id: From: "Jose Rodriguez Ruibal" Date: Wed, 15 Jan 2003 21:11:52 +0100 X-MIMETrack: Serialize by Router on D12ML705/12/M/IBM(Release 5.0.10 |March 22, 2002) at 15/01/2003 21:11:52 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org Hi all, I'm trying to boot SuSE SLES 8 kernel 2.4.19 on an Itanium 2 box. The kernel starts to load, but then it stops while loading the module "mptbase". Why? What can I do to resolve this? Thanks in advance for your help. Here it is the full log of the boot process. **************************************************************************** Full log of the boot process. Contact Jose Rodriguez Ruibal for feedback ***************************************************************************** EFI version 1.10 [14.60] Build flags: EFI64 Running on Intel(R) Itanium Processor EFI Boot Manager ver 1.10 [14.60] Loading device drivers EFI Boot Manager ver 1.10 [14.60] Please select a boot option SuSE SLES EFI Shell [Built-in] Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master) MemMap(0:FF000000-FFFFFFFF) MemMap(0:FF800200-FFBFFFFF) Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F0113) Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F0113) Flash Update Configuration/Setup Diagnostic Boot option maintenance menu Use  and  to change option(s). Use Enter to select an option Loading.: SuSE SLES Starting: SuSE SLES ELILO boot: Uncompressing Linux... done Loading initrd \initrd...done Linux version 2.4.19 (root@ITANIUM2.suse.de) (gcc version 3.2) #1 Thu Dec 12 19: 33:22 UTC 2002 Total HugeTLB_Page memory pages requested 0x20 EFI v1.10 by INTEL: SALsystab=0x1efc2000 ACPI 2.0=0xf1100 SMBIOS=0xf1000 CPU 0: mapping PAL code [0x1f000000-0x1f100000) into [0xe00000001f000000-0xe0000 00020000000) Initial ramdisk at: 0xe00000001ce6d000 (1138688 bytes) SAL v3.00: oem= IBM , product= XXX X XXX SAL: entry: pal_proc=0x1f008010, sal_proc=0x1f703970 SAL: Platform features booting generic kernel on platform dig CPU 0: 61 virtual and 50 physical address bits ACPI: RSDP (v002 IBM ) @ 0x00000000000f1100 ACPI: XSDT (v001 IBM SERMOW 00000.00001) @ 0x000000001efe0040 ACPI: FADT (v003 IBM SERMOW 00000.00003) @ 0x000000001efe0120 ACPI: DBGP (v001 IBM SERMOW 00000.00001) @ 0x000000001efe0220 ACPI: MADT (v001 IBM SERMOW 00000.00001) @ 0x000000001efe8140 ACPI: SRAT (v001 IBM SERMOW 00000.00001) @ 0x000000001efe82f0 ACPI: OEM0 (v001 IBM RIOTABLE 00000.00003) @ 0x000000001efe8400 ACPI: Local APIC address 0xc0000000fee00000 ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled) CPU 0 (0x0000) enabled ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x08] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x09] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0a] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0b] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0c] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0d] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0e] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: LSAPIC (acpi_id[0x0f] lsapic_id[0x00] lsapic_eid[0x00] disabled) ACPI: Ignoring CPU (0x0000) (NR_CPUS == 1) ACPI: IOSAPIC (id[0x0] global_irq_base[0x33] address[00000000fec01000]) iosapic_init: Disabling PC-AT compatible 8259 interrupts IOSAPIC: version 1.1, address 0xfec01000, GSIs 0x33-0x65 ACPI: IOSAPIC (id[0x0] global_irq_base[0x0] address[00000000fec00000]) iosapic_init: Disabling PC-AT compatible 8259 interrupts IOSAPIC: version 1.1, address 0xfec00000, GSIs 0x0-0x32 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x5b] PLATFORM int 0x2: GSI 0x5b(low,edge) -> CPU 0x0000 vector 48 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x5c] PLATFORM int 0x2: GSI 0x5c(low,edge) -> CPU 0x0000 vector 49 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x5d] PLATFORM int 0x2: GSI 0x5d(low,edge) -> CPU 0x0000 vector 50 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x5e] PLATFORM int 0x2: GSI 0x5e(low,edge) -> CPU 0x0000 vector 51 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x5f] PLATFORM int 0x2: GSI 0x5f(low,edge) -> CPU 0x0000 vector 52 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x60] PLATFORM int 0x2: GSI 0x60(low,edge) -> CPU 0x0000 vector 53 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x61] PLATFORM int 0x2: GSI 0x61(low,edge) -> CPU 0x0000 vector 54 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x2] id[0x0000] eid[0x0] ios apic_vector[0x0] global_irq[0x62] PLATFORM int 0x2: GSI 0x62(low,edge) -> CPU 0x0000 vector 55 ACPI: PLAT_INT_SRC (polarity[0x3] trigger[0x1] type[0x1] id[0x0000] eid[0x0] ios apic_vector[0x3] global_irq[0x2e] PLATFORM int 0x1: GSI 0x2e(low,edge) -> CPU 0x0000 vector 3 ACPI: NMI_SRC (polarity[0x1] trigger[0x1] global_irq[0xd]) 1 CPUs available, 1 CPUs total Mca related initialization done On node 0 totalpages: 62407 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz root=805 hda=ide-scsi console=tty S0,115200 ro ide_setup: hda=ide-scsi FPSWA interface at 0x1de72010, revision 1.12 CPU 0: base freq=200.000MHz, ITC ratio=9/2, ITC freq=900.000MHz Console: colour VGA+ 80x25 Calibrating delay loop... 1133.40 BogoMIPS Placing software IO TLB between 0xe000000001598000 - 0xe000000003598000 Memory: 952608k/998512k available (3916k code, 45904k reserved, 1847k data, 256k init) Total Huge_TLB_Page memory pages allocated 32 Dentry cache hash table entries: 65536 (order: 6, 1048576 bytes) Inode cache hash table entries: 65536 (order: 6, 1048576 bytes) Mount-cache hash table entries: 1024 (order: 0, 16384 bytes) Buffer-cache hash table entries: 65536 (order: 5, 524288 bytes) Page-cache hash table entries: 65536 (order: 5, 524288 bytes) POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20020815 PCI: Using SAL to access configuration space ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing ACPI: System [ACPI] (supports ACPI-0175: *** Error: Sleep State package eleme nts are not both Integers (Integer, [NULL Object Descriptor]) ACPI-0175: *** Error: Sleep State package elements are not both Integers (In teger, [NULL Object Descriptor]) ACPI-0175: *** Error: Sleep State package elements are not both Integers (In teger, [NULL Object Descriptor]) ) ACPI: PCI Root Bridge [P000] (00:00) PCI: Probing PCI hardware on bus (00:00) ACPI: PCI Root Bridge [P001] (00:01) PCI: Probing PCI hardware on bus (00:01) ACPI: PCI Root Bridge [P002] (00:02) PCI: Probing PCI hardware on bus (00:02) ACPI: PCI Root Bridge [P010] (00:05) PCI: Probing PCI hardware on bus (00:05) ACPI: PCI Root Bridge [P011] (00:07) PCI: Probing PCI hardware on bus (00:07) ACPI: PCI Root Bridge [P012] (00:09) PCI: Probing PCI hardware on bus (00:09) PCI: Probing PCI hardware PCI->APIC IRQ transform: (00:03.0 INTA) -> CPU 0x0000 vector 56 PCI->APIC IRQ transform: (00:04.0 INTA) -> CPU 0x0000 vector 57 PCI: no interrupt route for 00:00:05 pin A PCI->APIC IRQ transform: (00:05.2 INTD) -> CPU 0x0000 vector 58 PCI->APIC IRQ transform: (00:05.3 INTD) -> CPU 0x0000 vector 58 PCI->APIC IRQ transform: (01:03.0 INTA) -> CPU 0x0000 vector 59 PCI->APIC IRQ transform: (01:03.1 INTB) -> CPU 0x0000 vector 60 PCI->APIC IRQ transform: (01:04.0 INTA) -> CPU 0x0000 vector 61 iosapic_fixup_pci_interrupt: changing vector 37 from IO-SAPIC-edge to IO-SAPIC-l evel PCI->APIC IRQ transform: (01:04.1 INTB) -> CPU 0x0000 vector 37 PCI: Via IRQ fixup for 00:05.2, from 0 to 10 PCI: Via IRQ fixup for 00:05.3, from 0 to 10 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket perfmon: version 1.0 (sampling format v1.0) IRQ 238 perfmon: 47 bits counters perfmon: 4 PMC/PMD pairs, 16 PMCs, 18 PMDs PAL Information Facility v0.5 EFI Variables Facility v0.05 2002-Mar-26 Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 15601 aio_setup: sizeof(struct page) = 88 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I RQ DETECT_IRQ SERIAL_PCI enabled ˙ttyS00 at 0x03f8 (irq = 44) is a 16550A EFI Time Services Driver v0.3 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 29 VP_IDE: detected chipset, but driver not compiled in! PCI: Found IRQ 0 for device 00:05.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA hda: HL-DT-STCD-RW/DVD DRIVE GCC-4160N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 34 ide-floppy driver 0.99.newide RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: loaded (max 16 devices) ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 32768 buckets, 256Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 1088kB freed VFS: Mounted root (ext2 filesystem). Loading module mptbase ... ******************** and then the boot process stops. ******************** Un saludo / Best regards / Bien Cordialement, José RODRIGUEZ RUIBAL Linux specialist - RHCE (Red Hat Certified Engineer) IBM EMEA PSSC - Montpellier (France) tel/fax: +33 (0) 467 34 42 50 / 62 45 Jose.Rodriguez.Ruibal@fr.ibm.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/