lkml.org 
[lkml]   [2002]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [BK PATCH] PCI hotplug changes for 2.5.34
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.624 -> 1.625
# drivers/hotplug/cpqphp_core.c 1.6 -> 1.7
# drivers/hotplug/cpqphp.h 1.1 -> 1.2
# drivers/hotplug/cpqphp_ctrl.c 1.2 -> 1.3
# drivers/hotplug/cpqphp_nvram.c 1.2 -> 1.3
# drivers/hotplug/cpqphp_pci.c 1.5 -> 1.6
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/09/09 greg@kroah.com 1.625
# Compaq PCI Hotplug driver: fixed __FUNCTION__ usages
# --------------------------------------------
#
diff -Nru a/drivers/hotplug/cpqphp.h b/drivers/hotplug/cpqphp.h
--- a/drivers/hotplug/cpqphp.h Mon Sep 9 15:09:52 2002
+++ b/drivers/hotplug/cpqphp.h Mon Sep 9 15:09:52 2002
@@ -695,7 +695,8 @@
return 1;

hp_slot = slot->device - ctrl->slot_device_offset;
- dbg(__FUNCTION__": slot->device = %d, ctrl->slot_device_offset = %d \n", slot->device, ctrl->slot_device_offset);
+ dbg("%s: slot->device = %d, ctrl->slot_device_offset = %d \n",
+ __FUNCTION__, slot->device, ctrl->slot_device_offset);

status = (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot));

@@ -733,7 +734,7 @@
DECLARE_WAITQUEUE(wait, current);
int retval = 0;

- dbg(__FUNCTION__" - start\n");
+ dbg("%s - start\n", __FUNCTION__);
add_wait_queue(&ctrl->queue, &wait);
set_current_state(TASK_INTERRUPTIBLE);
/* Sleep for up to 1 second to wait for the LED to change. */
@@ -743,7 +744,7 @@
if (signal_pending(current))
retval = -EINTR;

- dbg(__FUNCTION__" - end\n");
+ dbg("%s - end\n", __FUNCTION__);
return retval;
}

diff -Nru a/drivers/hotplug/cpqphp_core.c b/drivers/hotplug/cpqphp_core.c
--- a/drivers/hotplug/cpqphp_core.c Mon Sep 9 15:09:52 2002
+++ b/drivers/hotplug/cpqphp_core.c Mon Sep 9 15:09:52 2002
@@ -314,7 +314,7 @@
void *slot_entry= NULL;
int result;

- dbg(__FUNCTION__"\n");
+ dbg("%s\n", __FUNCTION__);

tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);

@@ -476,7 +476,7 @@

u8 tbus, tdevice, tslot, bridgeSlot;

- dbg(__FUNCTION__" %p, %d, %d, %p\n", ops, bus_num, dev_num, slot);
+ dbg("%s: %p, %d, %d, %p\n", __FUNCTION__, ops, bus_num, dev_num, slot);

bridgeSlot = 0xFF;

@@ -592,7 +592,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -627,7 +627,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -667,7 +667,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -695,7 +695,7 @@
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;

- dbg(__FUNCTION__"\n");
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

if (slot == NULL)
return -ENODEV;
@@ -716,7 +716,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -734,7 +734,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -752,7 +752,7 @@
if (slot == NULL)
return -ENODEV;

- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -770,8 +770,8 @@

if (slot == NULL)
return -ENODEV;
-
- dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
+
+ dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

ctrl = slot->ctrl;
if (ctrl == NULL)
@@ -820,7 +820,7 @@
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
- err(__FUNCTION__" : pci_read_config_word failed\n");
+ err("%s : pci_read_config_word failed\n", __FUNCTION__);
return rc;
}
dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
@@ -831,14 +831,14 @@

ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
- err(__FUNCTION__" : out of memory\n");
+ err("%s : out of memory\n", __FUNCTION__);
return -ENOMEM;
}
memset(ctrl, 0, sizeof(struct controller));

rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
if (rc) {
- err(__FUNCTION__" : pci_read_config_word failed\n");
+ err("%s : pci_read_config_word failed\n", __FUNCTION__);
goto err_free_ctrl;
}

@@ -1053,7 +1053,7 @@
// Store PCI Config Space for all devices on this bus
rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
if (rc) {
- err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
+ err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_iounmap;
}

@@ -1080,7 +1080,7 @@
rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
if (rc) {
err(msg_initialization_err, 6);
- err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
+ err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_iounmap;
}

diff -Nru a/drivers/hotplug/cpqphp_ctrl.c b/drivers/hotplug/cpqphp_ctrl.c
--- a/drivers/hotplug/cpqphp_ctrl.c Mon Sep 9 15:09:52 2002
+++ b/drivers/hotplug/cpqphp_ctrl.c Mon Sep 9 15:09:52 2002
@@ -772,13 +772,13 @@
return(NULL);

for (node = *head; node; node = node->next) {
- dbg(__FUNCTION__": req_size =%x node=%p, base=%x, length=%x\n",
- size, node, node->base, node->length);
+ dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
+ __FUNCTION__, size, node, node->base, node->length);
if (node->length < size)
continue;

if (node->base & (size - 1)) {
- dbg(__FUNCTION__": not aligned\n");
+ dbg("%s: not aligned\n", __FUNCTION__);
// this one isn't base aligned properly
// so we'll make a new entry and split it up
temp_dword = (node->base | (size-1)) + 1;
@@ -804,7 +804,7 @@

// Don't need to check if too small since we already did
if (node->length > size) {
- dbg(__FUNCTION__": too big\n");
+ dbg("%s: too big\n", __FUNCTION__);
// this one is longer than we need
// so we'll make a new entry and split it up
split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
@@ -821,7 +821,7 @@
node->next = split_node;
} // End of too big on top end

- dbg(__FUNCTION__": got one!!!\n");
+ dbg("%s: got one!!!\n", __FUNCTION__);
// If we got here, then it is the right size
// Now take it out of the list
if (*head == node) {
@@ -856,7 +856,7 @@
struct pci_resource *node2;
int out_of_order = 1;

- dbg(__FUNCTION__": head = %p, *head = %p\n", head, *head);
+ dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);

if (!(*head))
return(1);
@@ -942,7 +942,7 @@
// Read to clear posted writes
misc = readw(ctrl->hpc_reg + MISC);

- dbg (__FUNCTION__" - waking up\n");
+ dbg ("%s - waking up\n", __FUNCTION__);
wake_up_interruptible(&ctrl->queue);
}

@@ -1382,8 +1382,8 @@
struct resource_lists res_lists;

hp_slot = func->device - ctrl->slot_device_offset;
- dbg(__FUNCTION__": func->device, slot_offset, hp_slot = %d, %d ,%d\n",
- func->device, ctrl->slot_device_offset, hp_slot);
+ dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
+ __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);

if (ctrl->speed == 1) {
// Wait for exclusive access to hardware
@@ -1430,55 +1430,55 @@
// turn on board and blink green LED

// Wait for exclusive access to hardware
- dbg(__FUNCTION__": before down\n");
+ dbg("%s: before down\n", __FUNCTION__);
down(&ctrl->crit_sect);
- dbg(__FUNCTION__": after down\n");
+ dbg("%s: after down\n", __FUNCTION__);

- dbg(__FUNCTION__": before slot_enable\n");
+ dbg("%s: before slot_enable\n", __FUNCTION__);
slot_enable (ctrl, hp_slot);

- dbg(__FUNCTION__": before green_LED_blink\n");
+ dbg("%s: before green_LED_blink\n", __FUNCTION__);
green_LED_blink (ctrl, hp_slot);

- dbg(__FUNCTION__": before amber_LED_blink\n");
+ dbg("%s: before amber_LED_blink\n", __FUNCTION__);
amber_LED_off (ctrl, hp_slot);

- dbg(__FUNCTION__": before set_SOGO\n");
+ dbg("%s: before set_SOGO\n", __FUNCTION__);
set_SOGO(ctrl);

// Wait for SOBS to be unset
- dbg(__FUNCTION__": before wait_for_ctrl_irq\n");
+ dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__);
wait_for_ctrl_irq (ctrl);
- dbg(__FUNCTION__": after wait_for_ctrl_irq\n");
+ dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__);

// Done with exclusive hardware access
- dbg(__FUNCTION__": before up\n");
+ dbg("%s: before up\n", __FUNCTION__);
up(&ctrl->crit_sect);
- dbg(__FUNCTION__": after up\n");
+ dbg("%s: after up\n", __FUNCTION__);

// Wait for ~1 second because of hot plug spec
- dbg(__FUNCTION__": before long_delay\n");
+ dbg("%s: before long_delay\n", __FUNCTION__);
long_delay(1*HZ);
- dbg(__FUNCTION__": after long_delay\n");
+ dbg("%s: after long_delay\n", __FUNCTION__);

- dbg(__FUNCTION__": func status = %x\n", func->status);
+ dbg("%s: func status = %x\n", __FUNCTION__, func->status);
// Check for a power fault
if (func->status == 0xFF) {
// power fault occurred, but it was benign
temp_register = 0xFFFFFFFF;
- dbg(__FUNCTION__": temp register set to %x by power fault\n", temp_register);
+ dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
rc = POWER_FAILURE;
func->status = 0;
} else {
// Get vendor/device ID u32
rc = pci_read_config_dword_nodev (ctrl->pci_ops, func->bus, func->device, func->function, PCI_VENDOR_ID, &temp_register);
- dbg(__FUNCTION__": pci_read_config_dword returns %d\n", rc);
- dbg(__FUNCTION__": temp_register is %x\n", temp_register);
+ dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc);
+ dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);

if (rc != 0) {
// Something's wrong here
temp_register = 0xFFFFFFFF;
- dbg(__FUNCTION__": temp register set to %x by error\n", temp_register);
+ dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
}
// Preset return code. It will be changed later if things go okay.
rc = NO_ADAPTER_PRESENT;
@@ -1494,7 +1494,7 @@

rc = configure_new_device(ctrl, func, 0, &res_lists);

- dbg(__FUNCTION__": back from configure_new_device\n");
+ dbg("%s: back from configure_new_device\n", __FUNCTION__);
ctrl->io_head = res_lists.io_head;
ctrl->mem_head = res_lists.mem_head;
ctrl->p_mem_head = res_lists.p_mem_head;
@@ -1531,7 +1531,7 @@
func->is_a_board = 0x01;

//next, we will instantiate the linux pci_dev structures (with appropriate driver notification, if already present)
- dbg(__FUNCTION__": configure linux pci_dev structure\n");
+ dbg("%s: configure linux pci_dev structure\n", __FUNCTION__);
index = 0;
do {
new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
@@ -1598,7 +1598,7 @@
device = func->device;

hp_slot = func->device - ctrl->slot_device_offset;
- dbg("In "__FUNCTION__", hp_slot = %d\n", hp_slot);
+ dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);

// When we get here, it is safe to change base Address Registers.
// We will attempt to save the base Address Register Lengths
@@ -1927,7 +1927,7 @@
func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl);
if (!func) {
- dbg("Error! func NULL in "__FUNCTION__"\n");
+ dbg("Error! func NULL in %s\n", __FUNCTION__);
return ;
}

@@ -1951,7 +1951,7 @@
func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl);
if (!func) {
- dbg("Error! func NULL in "__FUNCTION__"\n");
+ dbg("Error! func NULL in %s\n", __FUNCTION__);
return ;
}

@@ -2066,7 +2066,7 @@
}

if (rc) {
- dbg(__FUNCTION__": rc = %d\n", rc);
+ dbg("%s: rc = %d\n", __FUNCTION__, rc);
}

if (p_slot)
@@ -2332,11 +2332,11 @@

new_slot = func;

- dbg(__FUNCTION__"\n");
+ dbg("%s\n", __FUNCTION__);
// Check for Multi-function device
rc = pci_read_config_byte_nodev (ctrl->pci_ops, func->bus, func->device, func->function, 0x0E, &temp_byte);
if (rc) {
- dbg(__FUNCTION__": rc = %d\n", rc);
+ dbg("%s: rc = %d\n", __FUNCTION__, rc);
return rc;
}

diff -Nru a/drivers/hotplug/cpqphp_nvram.c b/drivers/hotplug/cpqphp_nvram.c
--- a/drivers/hotplug/cpqphp_nvram.c Mon Sep 9 15:09:52 2002
+++ b/drivers/hotplug/cpqphp_nvram.c Mon Sep 9 15:09:52 2002
@@ -161,7 +161,7 @@
(temp6 == 'Q')) {
result = 1;
}
- dbg (__FUNCTION__" - returned %d\n", result);
+ dbg ("%s - returned %d\n", __FUNCTION__, result);
return result;
}

diff -Nru a/drivers/hotplug/cpqphp_pci.c b/drivers/hotplug/cpqphp_pci.c
--- a/drivers/hotplug/cpqphp_pci.c Mon Sep 9 15:09:52 2002
+++ b/drivers/hotplug/cpqphp_pci.c Mon Sep 9 15:09:52 2002
@@ -140,7 +140,7 @@
//We did not even find a hotplug rep of the function, create it
//This code might be taken out if we can guarantee the creation of functions
//in parallel (hotplug and Linux at the same time).
- dbg("@@@@@@@@@@@ cpqhp_slot_create in "__FUNCTION__"\n");
+ dbg("@@@@@@@@@@@ cpqhp_slot_create in %s\n", __FUNCTION__);
temp_func = cpqhp_slot_create(bus->number);
if (temp_func == NULL)
return -ENOMEM;
@@ -307,7 +307,7 @@
memset(&wrapped_dev, 0, sizeof(struct pci_dev_wrapped));
memset(&wrapped_bus, 0, sizeof(struct pci_bus_wrapped));

- dbg(__FUNCTION__": bus/dev/func = %x/%x/%x\n",func->bus, func->device, func->function);
+ dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus, func->device, func->function);

for (j=0; j<8 ; j++) {
struct pci_dev* temp = pci_find_slot(func->bus, (func->device << 3) | j);
@@ -355,10 +355,10 @@
fakedev.devfn = dev_num << 3;
fakedev.bus = &fakebus;
fakebus.number = bus_num;
- dbg(__FUNCTION__": dev %d, bus %d, pin %d, num %d\n",
- dev_num, bus_num, int_pin, irq_num);
+ dbg("%s: dev %d, bus %d, pin %d, num %d\n",
+ __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num);
- dbg(__FUNCTION__":rc %d\n", rc);
+ dbg("%s: rc %d\n", __FUNCTION__, rc);
if (rc)
return rc;

@@ -1586,7 +1586,7 @@
int rc = 0;
struct pci_resource *node;
struct pci_resource *t_node;
- dbg(__FUNCTION__"\n");
+ dbg("%s\n", __FUNCTION__);

if (!func)
return(1);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.076 / U:6.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site