[lkml]   [2002]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: qlogic failover multipath
Oktay Akbal [] wrote:
> Hello,
> we do have some Problems with some qlogic 2202f fibrechannel card.
> When trying to use failover via plugging out some cable or using
> qlogics sansurfer to set an alternate path, there seem to be no errors,
> but everything works extremly slow and does not recover.
> This was used with driver 6.0b23 as from suse kernel 2.4.18.
> When trying 6.1b2 or b5 the disks get recognized as multiple scsi-disks,
> is this wanted for use with md multipath personality ?
> Is there a way to enable previos behavior ?

You can edit the qla_settings.h file and set MPIO_SUPPORT to 1 or I
believe if you use the qla2x00src-v6.1b5-fo archive that this should
already be set to 1.

Michael Anderson

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:28    [W:0.118 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site