lkml.org 
[lkml]   [2002]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectServerWorks CSB5 in recent -ac
Hi Alan/Andre,

it seems (U)DMA on CSB5 has only been possible to switch on w/ (a) recent
-ac kernel(s). Of 2.4.17, 2.4.19-pre2, 2.4.19, 2.4.20-pre7, and 2.4.20-
-pre7-ac3, only the last one is capable of running the disks/cdroms in
our HP tc3100 netserver in DMA.

While it won't let us use anything above UDMA2 unless we pass ideX=ata66,
the driver still seems to work just fine when forced into, say, UDMA5.

A bit rough around the edges but perfectly usable, thanks!

Relevant boot messages follow:

Kernel command line: root=/dev/md0 ide1=ata66 rw vga=4
ide_setup: ide1=ata66
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:pio, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:DMA
hdc: WDC WD800AB-00CBA0, ATA DISK drive
hdd: LTN486S, ATAPI CD/DVD-ROM drive
blk: queue c033256c, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0x170-0x177,0x376 on irq 15
hdc: host protected area => 1
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
hdd: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)

The CDROM gets autotuned to:
/dev/hdd:
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 1 (on)
readahead = 8 (on)

... and makes the driver spit the following upon initial read attempts:

hdd: DMA interrupt recovery
hdd: lost interrupt
hdd: status timeout: status=0xd0 { Busy }
hdd: status timeout: error=0x00
hdd: DMA disabled
hdd: drive not ready for command
hdd: ATAPI reset complete

... after which everything works ook. Contrary to what the driver
reports, DMA doesn't get disabled.

So how's integration into vanilla going? :)

T.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.048 / U:1.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site