lkml.org 
[lkml]   [2002]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.20-pre2-ac3 stops responding
Jens,

Ooops ! you are right, it is 2.4.20-pre5

------
Regards
Jean-Luc

Jens Axboe wrote:
>
> On Mon, Sep 02 2002, Jean-Luc Coulon wrote:
> > Alan Cox wrote:
> > >
> > > "On Fri, 2002-08-16 at 18:13, Jean-Luc Coulon wrote:
> > > > At boot time, I get the messages :
> > > >
> > > > Aug 16 11:34:19 f5ibh kernel: ALI15X3: simplex device: DMA disabled
> > > > Aug 16 11:34:19 f5ibh kernel: ide0: ALI15X3 Bus-Master DMA disabled
> > > > (BIOS)
> > >
> > > Linux did the simplex device check. Your ALi controller only permits DMA
> > > on one of the devices at a time. What is attached to the ALi controller
> > > ? Also does 2.4.19 base enable DMA correctly ?
> > >
> > What is the simplex device check ? You will find thereafter a copy of
> > the syslog while booting 2.4.19, it seems that it accepts both with DMA
> > enabled.
> >
> > > If sSep 2 09:00:51 f5ibh kernel: ALI15X3: chipset revision 193
> > f5ibh kernel: ALI15X3: not 100%% native mode: will probe irqs later
> > f5ibh kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA,
> > hdb:DMA
> > f5ibh kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio,
> > hdd:pio
> > f5ibh kernel: hda: QUANTUM FIREBALLP LM30, ATA DISK drive
> > fibh kernel: hdb: ST3491A, ATA DISK drive
> > f5ibh kernel: hdc: GoldStar CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
> > f5ibh kernel: hdd: CREATIVECD3621E, ATAPI CD/DVD-ROM drive
> > f5ibh kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > f5ibh kernel: ide1 at 0x170-0x177,0x376 on irq 15
> > f5ibh kernel: blk: queue c023d544, I/O limit 4095Mb (mask 0xffffffff)
> > f5ibh kernel: hda: 58633344 sectors (30020 MB) w/1900KiB Cache,
> > CHS=3649/255/63, UDMA(33)
> > f5ibh kernel: blk: queue c023d680, I/O limit 4095Mb (mask 0xffffffff)
> > f5ibh kernel: hdb: 836070 sectors (428 MB) w/120KiB Cache,
> > CHS=899/15/62, DMA
>
> Are you sure this is a 2.4.19 boot? It's either 2.4.20-preX (X >= 2) or
> 2.4.19 with block-highmem
>
> --
> Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.037 / U:23.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site