Messages in this thread |  | | Date | Mon, 2 Sep 2002 21:06:41 +0200 | From | janul@wp ... | Subject | PROBLEM: kernel BUG at page_alloc.c:91! |
| |
[1.] can't run logcheck (Segmentation fault): kernel BUG at page_alloc.c:91!
[2.]
[3.] kernel
[4.] Linux version 2.4.19 (root@janul) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Aug 18 18:23:48 CEST 2002
[5.] kernel BUG at page_alloc.c:91! invalid operand: 0000 CPU: 0 EIP: 0010:[__free_pages_ok+45/612] Tainted: P EFLAGS: 00010282 eax: 01000009 ebx: c1204ee8 ecx: c1204ee8 edx: 00000000 esi: 00000000 edi: cb3d7cb0 ebp: 00000019 esp: c05a1ef8 ds: 0018 es: 0018 ss: 0018 Process cat (pid: 11444, stackpage=c05a1000) Stack: c1204ee8 00001000 cb3d7cb0 00000019 c0a74270 c0114c36 c05a1f3c c07ea220 c1204ee8 c1204ee8 c1279258 cb3d7cb0 00000018 c012d3d3 c0126eb3 c05a1f8c c1204ee8 00000000 00001000 00000000 c284c940 ffffffea 00001000 00001000 Call Trace: [schedule+714/756] [__free_pages+27/28] [do_generic_file_read+503/1028] +[generic_file_read+126/304] [file_read_actor+0/140] [sys_read+150/240] [system_call+51/56]
Code: 0f 0b 5b 00 53 62 27 c0 89 d8 2b 05 30 76 34 c0 69 c0 a3 8b
And:
/usr/sbin/logcheck: line 315: 11451 Segmentation fault $LOGTAIL $file $offsetfile >>$TMPDIR/logoutput/$(/usr/bin/basename $file
kernel BUG at page_alloc.c:91! invalid operand: 0000 CPU: 0 EIP: 0010:[__free_pages_ok+45/612] Tainted: P EFLAGS: 00010282 eax: 0100000d ebx: c1204ee8 ecx: c1204ee8 edx: 00000000 esi: 00000000 edi: cb3d7cb0 ebp: 00000019 esp: c98b7ef8 ds: 0018 es: 0018 ss: 0018 Process logtail (pid: 11451, stackpage=c98b7000) Stack: c1204ee8 00001000 cb3d7cb0 00000019 00000018 00000002 c5d8ac40 c0126c55 c1204ee8 c1204ee8 c1279258 cb3d7cb0 00000018 c012d3d3 c0126eb3 c98b7f8c c1204ee8 00000000 00001000 00000000 c5d8ac40 ffffffea 00001000 00001000 Call Trace: [generic_file_readahead+257/312] [__free_pages+27/28] [do_generic_file_read+503/1028] +[generic_file_read+126/304] [file_read_actor+0/140] [sys_read+150/240] [system_call+51/56]
Code: 0f 0b 5b 00 53 62 27 c0 89 d8 2b 05 30 76 34 c0 69 c0 a3 8b
[6.]
2 * * * * root test -x /usr/sbin/logcheck && nice -n10 /usr/sbin/logcheck
[7.]
[7.1.] Linux janul 2.4.19 #1 Sun Aug 18 18:23:48 CEST 2002 i686 unknown unknown GNU/Linux
Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.15 e2fsprogs 1.27 pcmcia-cs 3.1.33 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.15 Modules Loaded ipx nls_iso8859-1 ipt_REDIRECT iptable_filter ipt_mark ipt_TCPMSS ipt_tcpmss ipt_state ip_nat_ftp ip_conntrack_ftp ip_nat_irc ip_conntrack_irc iptable_nat ip_conntrack ipt_REJECT ip_tables NVdriver sound vfat fat 3c59x
[7.2.] processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 3 cpu MHz : 666.711 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1330.38
[7.3.] ipx 15668 0 nls_iso8859-1 2848 1 (autoclean) ipt_REDIRECT 736 0 (unused) iptable_filter 1728 1 ipt_mark 480 0 (unused) ipt_TCPMSS 2304 0 (unused) ipt_tcpmss 928 0 (unused) ipt_state 608 2 ip_nat_ftp 3488 0 (unused) ip_conntrack_ftp 3424 0 [ip_nat_ftp] ip_nat_irc 2784 0 (unused) ip_conntrack_irc 2592 0 [ip_nat_irc] iptable_nat 18516 2 [ipt_REDIRECT ip_nat_ftp ip_nat_irc] ip_conntrack 20012 4 [ipt_REDIRECT ipt_state ip_nat_ftp ip_conntrack_ftp ip_nat_irc ip_conntrack_irc iptable_nat] ipt_REJECT 2720 2 ip_tables 12896 10 [ipt_REDIRECT iptable_filter ipt_mark ipt_TCPMSS ipt_tcpmss ipt_state iptable_nat ipt_REJECT] NVdriver 988512 10 (autoclean) sound 53548 0 (unused) vfat 9276 0 (unused) fat 29176 0 [vfat] 3c59x 24904 1
[7.4.] /proc/ioports
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(set) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 0cf8-0cff : PCI conf1 b400-b47f : 3Com Corporation 3c905B 100BaseTX [Cyclone] b400-b47f : 00:0d.0 b800-b8ff : Advanced System Products, Inc ABP940-U / ABP960-U b800-b80f : advansys d000-d03f : Ensoniq ES1371 [AudioPCI-97] d000-d03f : es1371 d400-d41f : VIA Technologies, Inc. UHCI USB d400-d41f : usb-uhci d800-d80f : VIA Technologies, Inc. Bus Master IDE d800-d807 : ide0 d808-d80f : ide1
/proc/iomem
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d0000-000d3fff : Extension ROM 000f0000-000fffff : System ROM 00100000-0bffbfff : System RAM 00100000-0026d3c6 : Kernel code 0026d3c7-003156d7 : Kernel data 0bffc000-0bffefff : ACPI Tables 0bfff000-0bffffff : ACPI Non-volatile Storage df000000-df00007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] df800000-df8000ff : Advanced System Products, Inc ABP940-U / ABP960-U e0000000-e1dfffff : PCI Bus #01 e0000000-e0ffffff : nVidia Corporation Vanta [NV6] e1f00000-e3ffffff : PCI Bus #01 e2000000-e3ffffff : nVidia Corporation Vanta [NV6] e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved
[7.5.]
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) Subsystem: Asustek Computer, Inc.: Unknown device 8017 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000dfff Memory behind bridge: e0000000-e1dfffff Prefetchable memory behind bridge: e1f00000-e3ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23) Subsystem: Asustek Computer, Inc.: Unknown device 8017 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 11) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d000 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03) Subsystem: Advanced System Products, Inc ASC1300 SCSI Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b800 [size=256] Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=64K]
00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at b400 [size=128] Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x2
[7.6.] Attached devices: none
[7.7.]
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |