Messages in this thread | | | Date | Mon, 16 Sep 2002 16:57:40 -0600 | From | kwijibo@zianet ... | Subject | Errors on D-Link DFE-580TX |
| |
I get these errors on using the D-Link DFE-580TX 4 port ethernet card. This is with a RedHat kernel 2.4.18-5smp and using the latest sundance driver version 1.09. These errors used to be much more frequent with earlier versions of the driver but they still occur. These errors are just a few of the many in my syslog.
eth0: Too much work at interrupt, status=0x0205 / 0x0205 .. 0x0214. eth0: Transmit timed out, status 8c0, resetting... Rx ring de3c3000: 00008053 0000803c 0000804a 0000804a 0000803c 00008040 00008040 0000803c 0000804a 0 000803c 0000803c 0000803c 0000803c 0000803c 00008067 00008067 00008067 00008067 00008040 00008040 00008 067 0000803c 0000803c 00008040 00008040 0000803c 0000803c 0000808e 0000804a 00008067 Tx ring de3c3200: 80018001 80018005 80018009 8001800d 80018011 80018015 80018019 8001801d 0018029 8001802d 80018031 80018035 80018039 8001803d eth0: Too much work at interrupt, status=0x0005 / 0x0205 .. 0x0204. eth0: Transmit timed out, status 9c0, resetting... Rx ring de3c3000: 0000803c 00008067 0000803c 0000803c 0000804a 0000804a 0000803c 0000803c 0008040 00008040 0000803c 0000803c 0000803c 0000803c 0000803c 0000803c 0000804a 0000803c 0000 040 00008040 0000803c 00008067 0000803c 00008067 00008067 00008067 00008067 00008067 Tx ring de3c3200: 80018001 80018005 80018009 8001800d 80018011 80018015 80018019 8001801d 0018029 8001802d 80018031 80018035 80018039 8001803d
Here is output of the card init:
sundance.c:v1.09 7/13/2002 Written by Donald Becker <becker@scyld.com> http://www.scyld.com/network/sundance.html eth0: D-Link DFE-580TX (Sundance ST201) at 0xdc00, 00:05:5d:e6:2b:05, IRQ 11. eth0: MII PHY found at address 1, status 0x782d advertising 01e1. eth1: D-Link DFE-580TX (Sundance ST201) at 0xd880, 00:05:5d:e6:2b:06, IRQ 10. eth1: MII PHY found at address 1, status 0x7809 advertising 01e1. eth2: D-Link DFE-580TX (Sundance ST201) at 0xd800, 00:05:5d:e6:2b:07, IRQ 9. eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. eth3: D-Link DFE-580TX (Sundance ST201) at 0xd480, 00:05:5d:e6:2b:08, IRQ 11. eth3: MII PHY found at address 1, status 0x7809 advertising 01e1.
Any ideas on what it could be? The card will stop working for a bit after a reset but it always comes back. This kind of behavior won't work for a production box however.
Steve
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |